My ACER Aspire pc won't boot past the Windows Logo. I tried to boot in safe mode but had the same problem. I am running XP home addition. It just keeps going round in circles, I get the Acer logo, then Windows and keeps repeating itself. I tried all the f8 options ie safe mode and starting from last known config but to no avail.
View 2 RepliesThe PC is now over a year old and has been running fine for about a year.
AMD 3500+939GT4- SLI-G Mobo
2 GB Twinmoss Ram200 Sata HD DVD 6600GT Sli Pixel View Graphics PCIe Super Flower 500 Watt PSU.
Now about 6 months ago, I started to get the Nvidia card sentinal saying the Graphics Card isnt getting enough power and will reduce its performance to prevent any damage. I checked it all out and it appear to be fine so pretty much ignore the issue.
On boot sequence, PC hangs on Windows boot screen - with the good old progress bar churning along for eternity. It just stays there. It is possible to boot into safe mode, safe mode with networking, etc. but never boots up normally. 'Last Known Good..." does not help at all.
I have tried 'repairing' XP using the recovery console (deleting the boot.ini file, then BOOTCFG /REBUILD and then FIXBOOT) to no avail. Do not know where in the boot process it is getting hung up and not totally sure how to determine that.Using Windows XP Media Center Edition with SP2. Plenty of RAM and disk space.
Had this problem once in the past and it seemed to self correct after about 50 reboots.
Does this sound like a re-install of XP is required or are there any other options that might work?
I have a Windows XP Professional Edition and i incurred a spyware virus on my PC, so i made a dumb decision by running MSCONFIG and changing my SAFEBOOT option, I did this because previously I couldn't even get into Safe Mode, it would load the files on the screen.
View 1 Replies View RelatedOn a HP Pavillion with Win XP Home the display goes blank after the Boot UP logo with the sliding progress graphic.I've tried all the safe modes and the last driver it shows loading is agp440.sys and then nothing else ever happens.I tried installing another video card and had the same symptoms.Knoppix boots with just a passed mode error but continues and appears to work OK.I belive that HP's restore image on the HD will wipe out the primary partion so I am hoping that someone can point out another way to fix this.
View 13 Replies View RelatedIt is possible to disable XP splash screen, which will slightly speed up the overall boot process. Be aware that removing the splash screen will also cause you not to see any boot-up messages that might come up (chkdsk, convert ), but if your system runs without any problems then it should not matter.1. Edit boot.ini2. Add " /noguiboot" right after "/fastdetect".(or check the /noguiboot switch in msconfig on the boot.ini tab)Upon restarting, the splash screen will be gone. It can be re-enabled by removing the new switch.
View 9 Replies View RelatedI have windows xp prof running and now when i turn on the computer it boots up, goes to the logo, and then the screen goes blank. The hard drive is still working, and i can go into safemode (f8) but every time i try to startup normally the screen just goes blank, the monitor says there is no signal. I have no clue how to go about resolving this.
View 5 Replies View RelatedI left my computer in "suspend", and when I sat again, it was frozen at my BIOS screen. Each time I try to restart it, it goes straight to that screen. I can't even access my BIOS settings (pressing keyboard buttons doesn't work). Nothing changed when I placed my XP disk in the ROM drive.
I'm using an ASUS mobo and AMD processor (sorry, I can't recall the particular models right now). I have not changed any hardware or installed new software recently except anti-virus definitions.
Does this sound like a motherboard or PSU issue?
I left my computer in "suspend", and when I sat again, it was frozen at my BIOS screen. Each time I try to restart it, it goes straight to that screen. I can't even access my BIOS settings (pressing keyboard buttons doesn't work). Nothing changed when I placed my XP disk in the ROM drive.
I'm using an ASUS mobo and AMD processor. (Sorry, I can't recall the particular models right now.) I have not changed any hardware or software recently.
Does this sound like a motherboard issue?
After a visit to the wonderful land of pornography, my dell (about 5 years old) has decided that it doesn't want to boot past the loading screen. Just before this happened, I booted up and the screen froze on the desktop, flashing some distorted lines across the center of the screen. I have tried rebooting multiple times and running diagnostics, but nothing appeared wrong. I'm going to assume its virus related.
View 4 Replies View RelatedI'm working on a Dell Inspiron 1000 that won't boot past trying to load the Mac address. Here's what I get with powering on: SiS 900 PXE Boot ROM v1.09b Hook Int18. CLIENT MACK ADDR: 00 0F 1F BC 5C EA GUID: 44454C4C-3400-1059-804C-C8C04F4C3431 DHCP ... (It sits & spins for a few seconds here.) PXE - MOF: Exiting Intel PXE ROM.
View 8 Replies View RelatedI have a winbook Si2 that i recently put XP pro on it worked fineat first after a few days it would not boot up past the windows blue welcome page the same thing happens in safe mood.how can i get it to boot to the desk top?
View 13 Replies View RelatedI'm removing spy & adware from a friend's PC, using spybot, adaware, and Norton AV. It seems to have worked, but one odd little problem exists. During the boot process, when the "Windows XP" logo with the moving blue bar disappears, the screen goes black, then the blue background loads for the "Windows is starting" screen - this is all normal. Before that screen appears, though, a large popup window appears, with just a few "boxes" for letters (bad font?), a red X to close it out and an "Ok" button. Clicking the red X does nothing except make the background go black. Clicking Ok is the only way to move past it, then the boot continues as normal. This does not happen in safe mode. I've gone through msconfig and disabled the startup programs, can't see anything in either win or system ini files.
View 1 Replies View RelatedI use my comp alot and installinguninstalling all sorts of stuff.. requiring reboots blah blah blah.. Checking out some other boot times my system seems abit slow.. or it's me being impatiant. My Boot Time is 38 seconds. I've tried every trick on the web i can find.. Programs, Reg edits, MSConfig etc.. and nothing seems to be saving me anytime at all.the only thing that saved me time was uninstalling Zone Alarm saving me 8 seconds, going from 46secs to 38secs.
System timings:
12 secs - BIOSRAID ControllersSystem list
3 secs - Blank
7 secs - Windows Logo with blue bar
7 secs - Blank
9 secs - Windows loadingDesktop loaded with all icons....
I cant get past boot screen into windows with out the password. (computer description) HP 6630 Pavillion with WIN 2000 Pro, both floppy and CD inputs.
View 4 Replies View RelatedMy friend has a XP Home OS. When he fires up his computer, that sucker wont boot past the little loading bar. It just stays there indefinently. I had him boot off the 6 XP boot discs and run "FIXBOOT" to re-write the boot sector, still nothing. We booted up off the XP-CD and ran the setup so we could run the repair (R), files loaded and the computer restarted. Still nothing happened.The files that remain on his computer are so fragile that doing a fresh install of his OS would be a disaster. Any thoughts as to restoring the computer?
View 4 Replies View Relatedi have a samsung model p29 laptop but have a problem when i boot the machine i get to the log on page, input my pass word then it says loading personalized settings then it says logging off saving settings !!! i know i have 2 virus's 1 is a win32 privacy remover (found by kapersky )the other is associated with ad-aware but i can tell what it is as it boots too fast for me to read what it is:(.I have tried to boot in safe mode but it just dose the same as when i boot in normal mode i dont want to reformat the hdd as there are a lot of family pictures that i want to save
View 4 Replies View RelatedCrashed computer and can't boot up again. I can't get past the finger print security in Safe mode or any other way I try to boot up. It does not show the box for typing in the password either. Just gives error when swiping finger.
View 14 Replies View RelatedI was working on my friend's computer and I had to switch the hard drive over to his new computer to try and get it to work on the new computer. It didn't work, so I tried to put the harddrive back in its original computer and now I have a problem. When I try to start up the computer, everything runs fine through the POST and then, before it goes to the Windows screen with the little bar that goes sideways, it stops on a black screen with the blinking underscore (_). I've restarted it many many times and it all ends up the same, stopping at the flashing underscore. I've tried to boot to a Win 98 boot floppy to get it to the command prompt but I get an error saying that it is the incorrect disk. I've also tried to reset the bios by taking the battery out for a while. It reset the bios good and all but I still got the same problem. I think it has to do with the MBR cause I know the harddrive works (as a slave in another computer) and I know the RAM is new. I don't think those are the problems because before I put the harddrive in the new computer to try and boot off it, it worked fine. I can't get into the start up menu either by pressing F8. The only thing I can think of that might work that I haven't tried is to boot off the XP cd and do the recovery console thing. Unless I know that it will abosolutely fix it, I'd like to stray away from it. If you think otherwise, I'll gladly try it. I think I had a problem like this before and I got past it somehow, but I don't remember how I did it.
View 14 Replies View Relatedafter removing and reformating HD,I put HD back in my Compaq Evo D500 and it won't get past the initial recognization of the floppy drive.The floppy indicator light remains ON,and I can't seem to go beyond Strike F1 any ideas on what went wrong?I checked the connections and the memory sticks to see they were all seated right,but it doesn't count up the memory in the upper left corner at this point I'm lost!
View 3 Replies View RelatedI am working on a Dell Optiplex GX270 that will not boot past the splash screen in normal mode, nor will it go into safe mode. I'm not getting any errors, just a very faint splash screen. So far I've tried (with no success):
1) changing power supplies
2) put in a new video card
3) put in a different hard drive with a fresh Windows XP install
4) different memory
I'm working on a Compaq Deskpro EN500 running Windows XP Professional SP2 (with all patches and updates), current antivirus and antispyware, and firewall. The system was working fine, user was online browsing the web when the system froze. The mouse froze, etc. Start button could not be accessed. The user shut down the system with the power button. When he turned it back on, he was greeted with the standard Microsoft 'an error has occured' screen' and given the choices of Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good
Start Windows Normally
When I choose any of these, I can get as far as the Windows XP splash screen and then the system seizes. I can get into the Windows Recovery Console. I have run a CHKDSK /P /R and a FIXBOOT. CHKDSK returns no errors. I'm not sure what to try next short of a rebuild.
i have toshiba laptop and i had to restart after installing poweriso but now it wont go past the windows xp boot screen itll just stay on the black screen it will not boot in safe mode or anything it freezes on the recovery console i have pretty much tryed everything
View 1 Replies View RelatedI am trying to get my computer to boot but having problems. It gets to the title page of windows xp and stays there...I wanted to do a system restore but when I go onto log on page my mouse isn't working either.....what should I do?
View 3 Replies View Relatedi'm getting really desperate here. Heres my problem I was on my fully functional computer last night, here are the specs
-Windows XP Home
-512 DDR ram
-Geforce FX 5200
-Intel Pentium 4
-i865Gm-IL **NEW** motherboard (funtioned perfectly)
Alright, last night, the power went out while i was on the computer. When the power comes back on, i get a blue screen saying
UNMOUNTABLE_BOOT_VOLUME
I absolutely CANNOT get past this screen, i've tried booting in safe mode, and still get nothing. I've tried TONS of commands from the recovery console. When I load up the console it asks me to choose either D:MiniNT (Which i believe is not what i use) and D:I386 I've tried the following commands on BOTH d:MininNT and D:I386
chkdsk /r
chkdsk /f
chkdsk /p
fixboot
fixmbr
I've tried them all, and i get the exact same error, i was on the phone with a good friend whos a comp technician and he had no answers, then I phoned the mobo company, still no answers. I've tried unplugging my HDD, still nothing. I am TOTALLY lost!! could someone
I had been away from my computer for about an hour and when i returned the screen was black and nothing would change it so hit the restart button. When the computer started up, I first saw the usual blue dell logo-screen, however, the next screen was the windows 98 startup logo-screen. The computer then entered DOS mode and at the top of the screen it says Microsoft Windows 98. This problem persists every time i start the computer. I only have 1 primary partion and i installed XP on it from a clean install by using a win98 bootdisk to format and running winnt from the i386 folder of the xp cd. When i try to enter SAFE MODE the computer goes to the Win 98 start-up logo screen again and enters DOS again. I know that all my files are still on the HDD because i can navigate through them. All i really want to do is somehow save some files that are on te HDD so i can just format and reinstall XP.
View 4 Replies View RelatedA dell inspiron 1000 and it will not boot past the splash screen. when i try to hit f2 or f12 it says entering setup or boot menu but will not go further.
View 14 Replies View RelatedI originally had XP Pro when the problem first started. When booting, the normal boot screen will come up with the "compaq" logo and F1 for setup f10 for restore, and then normally proceeds to the windows xp pro screen with the scrolling bar at the bottom. Now on boot, this bar will stay scrolling acting like it is trying to boot and it takes literally anywhere from 6 hours to 3 days to start up. I used restore points and the same thing happened. When I start in safe mode, the normal safe mode multidisk prompt comes up and even that will stay on winsys32driversagp330.sys for the same amount of hours before it finally boots up. I also reinstalled my windows xp.
View 1 Replies View Relatedit all started when I ran Nod32 antivirus. I ran it because I had some viruses on my computer that I wanted to get rid of. After the scan there were 180 some detected objects that were quarantined or deleted. So then I restart my computer and after the windows xp logo there is just a black screen with no cursor. And after awhile the computer will just restart and try booting up again. I tried going into safe mode and safe mode with command prompt but I still get a black screen with no cursor. The last known good configuration doesn't work either. I'm pretty frustrated because I did nothing wrong. I am also having a feeling that nod32 might have quarantined some infected files that are essential for Windows Xp to boot. I also do not have any windows xp disks with me how to fix this?
View 11 Replies View Relatedmy PC, after the xp logo, it hangs, i have to restart about 3 times to fix it, i have ran anti virus, and spyware scan, i think its a software/driver issue, any ideas how i can figure out what it is?
View 2 Replies View RelatedWhen I try normal boot, windows hangs up on XP logo screen. The hdd indicator tells me there is no more hdd access.When using save mode, windows starts until black screen with note "save mode" in the edges appears, then hangs up, also no more hdd access.Booting with options "last known working config" and other options does not work, too. (always the same result - hang up with no more hdd action).In my last working session i did not change any config, installed programs or so. Just using office package, acrobat, photoshop, icq and skype.Shutdown without any problems.
View 8 Replies View Related