Crashed computer and can't boot up again. I can't get past the finger print security in Safe mode or any other way I try to boot up. It does not show the box for typing in the password either. Just gives error when swiping finger.
View 14 Replies
Does anyone presently use one of these. Can you have more than one finger print for a given account ex: joint bank account
View 11 Replies View RelatedI recently purchased the Microsoft Fingerprint reader to run on my Windows XP MCE system It works fine for the most part, but I can seem to change any settings for a previously configured logon page When I reach a logon page which I have set up to use the fingerprint reader, an icon appears in the title bar next to the minimze/restore buttons. The flyover help says I can click on the icon to edit the signon information for
this page. However, when I click this icon, all I get is a dialog with the hightlighted fingers just telling me to use one to signon.Am I missing something? How do you edit signon information for a previously
configured page? I installed the software and reader on my laptop (XP Pro)
I have a Windows XP Professional Edition and i incurred a spyware virus on my PC, so i made a dumb decision by running MSCONFIG and changing my SAFEBOOT option, I did this because previously I couldn't even get into Safe Mode, it would load the files on the screen.
View 1 Replies View RelatedMy ACER Aspire pc won't boot past the Windows Logo. I tried to boot in safe mode but had the same problem. I am running XP home addition. It just keeps going round in circles, I get the Acer logo, then Windows and keeps repeating itself. I tried all the f8 options ie safe mode and starting from last known config but to no avail.
View 2 Replies View RelatedI left my computer in "suspend", and when I sat again, it was frozen at my BIOS screen. Each time I try to restart it, it goes straight to that screen. I can't even access my BIOS settings (pressing keyboard buttons doesn't work). Nothing changed when I placed my XP disk in the ROM drive.
I'm using an ASUS mobo and AMD processor (sorry, I can't recall the particular models right now). I have not changed any hardware or installed new software recently except anti-virus definitions.
Does this sound like a motherboard or PSU issue?
I left my computer in "suspend", and when I sat again, it was frozen at my BIOS screen. Each time I try to restart it, it goes straight to that screen. I can't even access my BIOS settings (pressing keyboard buttons doesn't work). Nothing changed when I placed my XP disk in the ROM drive.
I'm using an ASUS mobo and AMD processor. (Sorry, I can't recall the particular models right now.) I have not changed any hardware or software recently.
Does this sound like a motherboard issue?
After a visit to the wonderful land of pornography, my dell (about 5 years old) has decided that it doesn't want to boot past the loading screen. Just before this happened, I booted up and the screen froze on the desktop, flashing some distorted lines across the center of the screen. I have tried rebooting multiple times and running diagnostics, but nothing appeared wrong. I'm going to assume its virus related.
View 4 Replies View RelatedI'm working on a Dell Inspiron 1000 that won't boot past trying to load the Mac address. Here's what I get with powering on: SiS 900 PXE Boot ROM v1.09b Hook Int18. CLIENT MACK ADDR: 00 0F 1F BC 5C EA GUID: 44454C4C-3400-1059-804C-C8C04F4C3431 DHCP ... (It sits & spins for a few seconds here.) PXE - MOF: Exiting Intel PXE ROM.
View 8 Replies View RelatedI have a winbook Si2 that i recently put XP pro on it worked fineat first after a few days it would not boot up past the windows blue welcome page the same thing happens in safe mood.how can i get it to boot to the desk top?
View 13 Replies View RelatedI cant get past boot screen into windows with out the password. (computer description) HP 6630 Pavillion with WIN 2000 Pro, both floppy and CD inputs.
View 4 Replies View RelatedMy friend has a XP Home OS. When he fires up his computer, that sucker wont boot past the little loading bar. It just stays there indefinently. I had him boot off the 6 XP boot discs and run "FIXBOOT" to re-write the boot sector, still nothing. We booted up off the XP-CD and ran the setup so we could run the repair (R), files loaded and the computer restarted. Still nothing happened.The files that remain on his computer are so fragile that doing a fresh install of his OS would be a disaster. Any thoughts as to restoring the computer?
View 4 Replies View Relatedi have a samsung model p29 laptop but have a problem when i boot the machine i get to the log on page, input my pass word then it says loading personalized settings then it says logging off saving settings !!! i know i have 2 virus's 1 is a win32 privacy remover (found by kapersky )the other is associated with ad-aware but i can tell what it is as it boots too fast for me to read what it is:(.I have tried to boot in safe mode but it just dose the same as when i boot in normal mode i dont want to reformat the hdd as there are a lot of family pictures that i want to save
View 4 Replies View RelatedI was working on my friend's computer and I had to switch the hard drive over to his new computer to try and get it to work on the new computer. It didn't work, so I tried to put the harddrive back in its original computer and now I have a problem. When I try to start up the computer, everything runs fine through the POST and then, before it goes to the Windows screen with the little bar that goes sideways, it stops on a black screen with the blinking underscore (_). I've restarted it many many times and it all ends up the same, stopping at the flashing underscore. I've tried to boot to a Win 98 boot floppy to get it to the command prompt but I get an error saying that it is the incorrect disk. I've also tried to reset the bios by taking the battery out for a while. It reset the bios good and all but I still got the same problem. I think it has to do with the MBR cause I know the harddrive works (as a slave in another computer) and I know the RAM is new. I don't think those are the problems because before I put the harddrive in the new computer to try and boot off it, it worked fine. I can't get into the start up menu either by pressing F8. The only thing I can think of that might work that I haven't tried is to boot off the XP cd and do the recovery console thing. Unless I know that it will abosolutely fix it, I'd like to stray away from it. If you think otherwise, I'll gladly try it. I think I had a problem like this before and I got past it somehow, but I don't remember how I did it.
View 14 Replies View Relatedafter removing and reformating HD,I put HD back in my Compaq Evo D500 and it won't get past the initial recognization of the floppy drive.The floppy indicator light remains ON,and I can't seem to go beyond Strike F1 any ideas on what went wrong?I checked the connections and the memory sticks to see they were all seated right,but it doesn't count up the memory in the upper left corner at this point I'm lost!
View 3 Replies View RelatedI am working on a Dell Optiplex GX270 that will not boot past the splash screen in normal mode, nor will it go into safe mode. I'm not getting any errors, just a very faint splash screen. So far I've tried (with no success):
1) changing power supplies
2) put in a new video card
3) put in a different hard drive with a fresh Windows XP install
4) different memory
I'm working on a Compaq Deskpro EN500 running Windows XP Professional SP2 (with all patches and updates), current antivirus and antispyware, and firewall. The system was working fine, user was online browsing the web when the system froze. The mouse froze, etc. Start button could not be accessed. The user shut down the system with the power button. When he turned it back on, he was greeted with the standard Microsoft 'an error has occured' screen' and given the choices of Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good
Start Windows Normally
When I choose any of these, I can get as far as the Windows XP splash screen and then the system seizes. I can get into the Windows Recovery Console. I have run a CHKDSK /P /R and a FIXBOOT. CHKDSK returns no errors. I'm not sure what to try next short of a rebuild.
i have toshiba laptop and i had to restart after installing poweriso but now it wont go past the windows xp boot screen itll just stay on the black screen it will not boot in safe mode or anything it freezes on the recovery console i have pretty much tryed everything
View 1 Replies View RelatedI am trying to get my computer to boot but having problems. It gets to the title page of windows xp and stays there...I wanted to do a system restore but when I go onto log on page my mouse isn't working either.....what should I do?
View 3 Replies View Relatedi'm getting really desperate here. Heres my problem I was on my fully functional computer last night, here are the specs
-Windows XP Home
-512 DDR ram
-Geforce FX 5200
-Intel Pentium 4
-i865Gm-IL **NEW** motherboard (funtioned perfectly)
Alright, last night, the power went out while i was on the computer. When the power comes back on, i get a blue screen saying
UNMOUNTABLE_BOOT_VOLUME
I absolutely CANNOT get past this screen, i've tried booting in safe mode, and still get nothing. I've tried TONS of commands from the recovery console. When I load up the console it asks me to choose either D:MiniNT (Which i believe is not what i use) and D:I386 I've tried the following commands on BOTH d:MininNT and D:I386
chkdsk /r
chkdsk /f
chkdsk /p
fixboot
fixmbr
I've tried them all, and i get the exact same error, i was on the phone with a good friend whos a comp technician and he had no answers, then I phoned the mobo company, still no answers. I've tried unplugging my HDD, still nothing. I am TOTALLY lost!! could someone
A dell inspiron 1000 and it will not boot past the splash screen. when i try to hit f2 or f12 it says entering setup or boot menu but will not go further.
View 14 Replies View RelatedI write a file in Word and then save it.Before I print it I usually go into Print Preview just to check things out.This time however it just showed me a blank box and the printer would not print.Everything was OK for a complete day and then the problem happened again - blank preview and no printing. This time switching off for 10 minutes and then back on had no effect.I have been trying most of today to correct things without success. I then copied it onto a floppy, put the floppy in my friends PC - same result as before
View 4 Replies View RelatedI previously owned a Lexmark Z25 printer and up to a certain point, it was printing ok. Then it abruptly stopped printing any pages. It sounded as if it was getting the signal from the computer, but nothing would print. Rather than buy new cartridges, which would have cost more than a new printer, I bought a Dell 720. Now, the color prints fine, but I cannot get the black to print. The cartridges are just about full with only a small amount out of the black cartridge.
View 7 Replies View RelatedWalk me through printing an envelope on my Lexmark X125. I have clicked on envelopes, then options for the envelope size, then print. The envelope comes out blank.
View 3 Replies View RelatedAll worked as normal Printer icon would print automatically with default print settings; File -Print would bring up print properties dialogue box to select options.Unhooked printer from laptop. Since reconnecting printer, the print icon button reverts to bringing up the print properties box as happens with going File - print. There is only one printer attached - it is shown in "Printers and Faxes" with a tick. There is nowhere to check it as the default printer as it is the only printer.How can I make the print icon button just do straight default prints again?
View 3 Replies View RelatedI have an old Sony VAIO (running Win Xp) that I am using a print server. The VAIO is connected to a HP PSC. The VAIO is on a wireless network along with two other laptops. One laptop is running Win Xp and the other is running Vista. Everything was working fine as far as printing went until I reinstalled the OS on the Win Xp machine (same OS). Previously the VAIO would go offline due to hibernation and so if I tried to print something from the Xp machine, it would get in the queue and get printed when I turned the VAIO on. Now the print jobs are not getting in a queue when the VAIO is offline.I don't know what I did right before and so I don't know how to remedy the problem.
View 10 Replies View RelatedHp laptop running win xp professional going great untill this morning now when trying to boot computer recieve following error message before login screen "isass.exe Security Accounts Manager initialization failed because of the following error:The handle is invalid.Error status 0xc0000008.Please click ok to shutdown this system and re boot into safe mode,check the event log for more detailed information."When ok is clicked unable to get into safe mode same error message appears.
View 9 Replies View RelatedI installed a new modem the other day cause the old one got fried. Now I am trying to print and the printer keeps giving me an error message, "this document fail to print." I tried all possible troubleshooting techniques but nothing help. I don't know what to do.
View 1 Replies View RelatedIts making these icons appear that are either porn or these downloads to those trojan spyware things. There are two icons where the time is, a yellow yield sign and the red x and they just lead me to more of those sites, can someone help me get rid of them?
View 3 Replies View RelatedThere are suddenly no options listed under the "Manage security settings for:" heading, just blank space, so I have no way to edit my Firewall, Antivirus or Windows Update settings from the Center. I opened services.msc and it shows the service started automatically.
View 1 Replies View RelatedI've forgotten but in a new install of XP-Pro,SP2 using NTFS on C: I don't have the Security Tab when I right click on a folder to setup sharing. I want this so I can set Permissions, etc. I have it on my other PC set up the same way but for some reason I don't on this new install.
What am I doing wrong? My username is a member of the Andministrators group.
