I have XP installed and have run the computer for about 2 years without problem. However, 2 days ago, the computer won't boot up and without any signal to the LCD monitor. I noticed that the CD drive was lit up once I switched on power on the computer. The CD drive light kept on and the computer did not go any further.
I goto run msconfig, it acts like it's loading, but the window never opens. When I check the Task Manager, msconfig.exe is in the processor list. So, why won't the window show itself
Am having a problem with Display Properties in WinXP-2. During the first 5 minutes after boot-up, screen resolution on my desk top is unstable with icon and window sizes changing from large to small and vice-versa. Resetting the Display Properties during this time has no effect. When the system warms up the problem is gone. Can the Monitor itself be the problem, or is it most likely the Video Card? I don't have another monitor to use as a test unit.
I am running XP Professional have recently installed Nokia PC Suite 6.6 When I boot up I get an Explorer window opening at D:Program FilesCommon (D is my boot drive). If I remove the software I don't get the Explorer window.
I have a winbook Si2 that i recently put XP pro on it worked fineat first after a few days it would not boot up past the windows blue welcome page the same thing happens in safe mood.how can i get it to boot to the desk top?
I have an older Sony Viao desktop. Today I thought it would be a good idea to change the drive letters around in the Computer Managment utility that comes with Xp. So I have 3 physical drives, one of them is external, and I tryed to take the two Cd/dvd drives and move them to the bottom of my drive list by disableing them, then going to the Computer Management Utility, right clicking on my Local H drive, and selecting Change Drive Letter... Did that, then went back to the device manager, enabled my two cd/dvd roms, and everythign seemed to be in order... LOL! Until I restarted my computer. Now windows wont boot up. Wont boot from MY copy of Xp, and to top it off, the bios freezes as sson as I hit any key.
My motherboard went kaput. I got a new motherboard and was going to avoid formating by using a repair install. I did the repair install and booted to windows (in safe mode) but it crashed on agp440.sys, which seems to be a fairly common problem with outdated chipset drivers. I know I can disable this driver in the recovery console, but when I boot to my XP disk, it cannot find my XP installation, It just goes straight to the screen where I can pick a partition to install onto. How did my XP install get lost? I recently fixed up my boot records and everything was fine, I was always able to use the recovery console. Obviously the install is there since I can start booting to it.
I have an older Sony Viao desktop. Today I thought it would be a good idea to change the drive letters around in the Computer Managment utility that comes with Xp. So I have 3 physical drives, one of them is external, and I tryed to take the two Cd/dvd drives and move them to the bottom of my drive list by disableing them, then going to the Computer Management Utility, right clicking on my Local H drive, and selecting Change Drive Letter... Did that, then went back to the device manager, enabled my two cd/dvd roms, and everythign seemed to be in order..Now windows wont boot up. Wont boot from MY copy of Xp, and to top it off, the bios freezes as sson as I hit any key. So Im hoping someone can help me with this problem, because I have lots of important data on that machine that I need access to
How can I see my XP boot up process (memory count, etc.) on the screen when I power on. Currently, I get a quick screen with F2 and DEL (system setup and boot order) and then on to the XP banner screen and login screen. I don't see the devices load or RAM count up.
i am dual booting xp mce and vista.. and im wondering if its possible to change the displayed names because xp shows up as "earlier windows version" or something like that and i'd rather it just say xp
name of pc is not accessible. you might not have permission to use this network resource. contact the administrator of this server to find out if u have xs permissions. Logon failure : the user has not been granted the requested logon type at this computer
I cannot view in full screen anymore.I created a website that lets a user enter their name and social # and then choose a test in 1 of 3 languages. Once you choose a language, a new browser window opens and the test/information is displayed in this new window.
Recently my Windows XP HP laptop started taking exceptionally long to load the desktop Icons on bootup. Wondering if something in my registry got messed up recently. Looking for advise on how to troubleshoot this issue so I can fix the long delay in loading the desktop icons.
Microsoft Windows XP Professional Version 2002 Service Pack 2
Ever since I bought my laptop a couple of years ago I have had this annoying screen pop up every time the computer starts up entitled Avance AC '97 Audio Setup (4.70) Maintenance Complete..in the window itself it reads.... Installation wizard has finished performing maintenance operations on Avance AC'97.restart computer now or later
When i open any link with "open in new window" the new window is not full size screen window.Of course i dragged it by mouse many times and that should fix it later.It means it should be opened as it had been dragged,but that's never happened though i dragged it about a hundred time as a full screen size.What is the wrong here?
I just replaced my old Windows 2000 HD with a newly purchased HD and installed Windows XP Pro/SP2 with all the latest updates from MS.When opened this web page by placing cursor on the line and click, the Google page appears briefly on the myWin.doc window but immediately closes and opens a new, different size window for the Google web page. In the old Windows 2000, the Google page remains opened on the same window overlapping the myWin.doc window and no new window is opened.
I have problems if I try and run the display settings above 800x600. I was wondering if this would be fixed if I upgrade the firmware settings and if so where would I get these upgrades? Whenever I try and run it at a higher display setting all I get is a thing saying "Signal isnt compatible with this display setting".
While playing a game I hit some buttons on accident and the display shrunk. Now the monsters are small, and so is everything else outside of the game I have no idea what I did, I checked the Screen Resolution and it seems fine, and I also checked my monitor settings, which is fine.
The monitor started showing graphic distortion. I ordered a new monitor but had the same distortion on it. I updated the ATI drivers but it did not solve the problem. In trying to trouble shoot the problem following directions on the ATI website, I changed all the graphic settings to the lowest and slowest available. This got rid of the distortion but the settings need to go! Now I cannot open the display settings.
My XP is currently defaulted on it's display settings 640v by 480 pixels and will not allow me to change it. In fact, there is nothing to change it to. I dont know what file I must of deleted, but is there anyway I can download the driver or something to make it so that it can be set on opitions that are higher?
All my text/font display settings seem to have changed. I downloaded a freeware program today called avi2dvd, to convert avi video files to iso files for burning to DVD. I tried it out, got frustrated with it, and uninstalled it. After I uninstalled it, I went to check my email. That's when I first noticed that all the text in my yahoo email account had changed - it seemed smaller, like it was at a lower resolution.
I clicked on a few more pages and it was the same for all of them - the text was just not as...smooth. Not as readable. And definitely smaller. It's not just a font size thing, I'm not that much of a newbie, I tried enlarging the font and it's definitely a resolution thing, not just a font or size issue. Then I tried out some other programs, and found out that the problem was system-wide. I use a writing program called Final Draft, and the text in that is also less readable.I found one program that hadn't been affected: IE all my web pages display fine in Explorer.
my mom installed a virus the other day on accident. (Some program called Dr. Spy Shreddar, or something like that.) I deleted it, but some stuff was weird with the computer. I tried restarting the system to get the old configuration back, but the virus just installed itself again. I removed it again, using instructions from Systematic Antivirus and now it's really gone. Some of the settings were still weird though. So after hours of searching the help topics on Microsoft I managed to fix 1 & 1/2 of the problems I had/have.
For one of the problems they made me go into the registry and set something to the value of 0 in order to get the desktop tab back in the Display Properties box. (You know when you right click on the desktop and select properties.) That's all fine and dandy, but here's the other 1/2 of my problem: I can't access some of the features in the tab. (I have Windows XP Professional, by the way.) I can't click inside of the background list and it's shaded a sort of brownish beige color. I also can't browse and do anything with the position setting. I can however access the customize desktop and color features
I was installing security cables for the computer stations. when I finished and rebooted the computers(had to disconnect power and other cords to run the security cables) one of them had a display problem.
it seems that the display area has been reduced. the functional area of the screen is maybe 60% of what it should be. in this area it is complete with the full desktop able to be accessed and nothing is missing. but the right 20% of the screen is solid black (cursor stops at the boundary) and the bottom 20% of the screen(that's not black) is displaying a second image of the top 20% of my desktop. (cursor also stops at this boundary.)
I reinstalled XP Pro with SP1 on my computer today. Everything is working well except when my desktop loads the actual display is about an inch to the right on the screen. If I go into properties and change/apply the screen resolution from 800 x 600 then back to 1024 x 768 it realigns and all is well. I would just prefer to not have to do that each time I restart windows.
my mom installed a virus the other day on accident. (Some program called Dr. Spy Shreddar, or something like that.) I deleted it, but some stuff was weird with the computer. I tried restarting the system to get the old configuration back, but the virus just installed itself again.For one of the problems they made me go into the registry and set something to the value of 0 in order to get the desktop tab back in the Display Properties box. (You know when you right click on the desktop and select properties.) That's all fine and dandy, but here's the other 1/2 of my problem: I can't access some of the features in the tab.
I am experiencing pixelization problems. At first it would only occur at boot up or reboot. Now it is happening all the time which can be help somewhat by refresh, changing the desktop picture, and/or logging off then on I have tried, disabling the 128MB DDR ATI Radeon 9800 Pro using device manager. At first it was OK but at low resolution (VGA I think), but when it asked if I wanted to let windows manage the graphics it got garbled again. I have reset resolutions down to 800 x 600 using the graphics card but that doesn't help.
I have a strange problem, I must have somehow scrolled a display window in my program out of the screen and left it there. Now the window has cut off 20% of the side of window and there is no way to bring it back into the window.If I mazimize the window size the scroll doesn't show.If I make the window smaller so that the horizontal scroll does show it won't scroll far enough to the left to show the missing section of the window.
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
When my computer boots into windows or any office program and outlook, I get a box on the screen that says windows installer preparing install then a another box comes up it says setup this MSI must be launched through setup with a OK button.
Hi, I have a laptop Toshiba portege M400 using window XP "tablet PC Edition 2005 version 2002". The window is kinda messy with many problems on it so I want to reformat it. I've created a recovery disc, What am i suppose to do to reformat it as when i first bought it? thanks. (i understand everything will be lost).