This follows on from a previous discussion that is now closed, except my problem is a little different. I have an ACER laptop and am trying to install Windows XP Home on a brand new hard drive, but shortly after the drivers start to download/install I get an error that says that "the file vga.sys is corrupted" and then I get kicked out of the install. I assumed it was a problem with the disc, so I tried 2 more and had the same problem. What can I do to get past this point?
I am running Win XP Mediaa Center Edition 2005 and have just received a message on the second boot up page saying: Windows cannot load because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM You may attempt to recover or repair this file using the original Windows CD
I have created a command file called Runinstall.cmd in C: I put these lines in Runinstall.cmd to call another command file (Install.cmd) in different location,the Runinstall.cmd can call the Install.cmd in different location , but some silly things occur.I use Install.cmd to install software programmes.As the installers or items are in the same directory as the Install.cmd, I can just specify the file names without specifying the path of the files in the Install.cmd.
I restored a partition with Drive Image and am getting this message. It's worked fine for over a year but now a problem. I might have marked the partition active or not, I'm not sure. Older versions of the partition don't work. I think the boot.ini is ok. I checked it and can't find a problem. I copied HAL.DLL to all of my drives under windows/system/32 to see if booting was going to another drive and a different error message would appear. The first time it booted to the first choice in the boot screen and after that gives the same missing or corrupted HAL.DLL I've downloaded stuff from Microsoft but thought Symantec doesn't have good tech support any more; not like PowerQuest or whatever their name was.
Windows XP Pro SP2. Was all the way updated, but I think the last update may have hosed me.When I turn on the PC, it fails to load successfully...eventually it comes up with an error that says that NTFS.sys is corrupt.I tried the last known good...didn't help.I can boot from the installation CD. If I go into the recovery console, it comes up to the c: prompt but it fails to read the directory if I run DIR. When I tried to copy the NTFS.sys from the installation CD, it doesn't allow it.I tried going through the install, but when I get to the point of installing it on the existing partition, it wanted to reformat rather than repairing the Windows installation...I would REALLY like to avoid reformatting the drive before I retrieve data if at all possible.
I had a virus for the first time in absolute yonks the other week, no idea how it got there but it appeared to not have caused any damage. Got rid of it and all appeared well. So I turned on my computer yesterday morning, went to log on and was presented with a BSOD.Run the driver verifier against any new (or suspect) drivers. If that doesn't reveal the corrupting driver, try enabling special pool. Both of these features are intended to catch the corruption at an earlier point where the offending driver can be identified.If you need to use safe mode to rmeove or disable components, restart your computer, press F8 to select Advanced Startup Iotions and then select Safe Mode.If this is the first time you've seen this stop error screen, restart your computer.
Can anyone tell me how to repair or uninstall a corrupted .NET Framework 3.5 SP1 installation? I have tried Add/Remove on Control Panel, Windows Install Cleanup (file no longer showing), and downloading and re-installing the application - none work, 3.5 SP1 still shows in Add/Remove with earlier versions (back to 1.1)
I was having a problem with a lot of my Data becoming damaged or corrupted. At first i expected a virus (I run Nod32), but now i'm not sure. I reformatted, and repaired the MBR. When I run Nod32, it usually tells me one or more files have been damaged.
I have used this website several times in the past to find solutions to some of my problems. I have normally been able for find what I need, without asking for help. Not for this problem, though. So, I am one of your newest members to this really cool site. I donated $20 to support this valuable resource. All files that are downloaded are corrupted
I noticed that my AntiVirus was not up-to-date (I got the MS security warning that virus prot was not running). I tried the "Live Update" feature and it didn't work (Live update could not uncompress the list of available updates. The update list somehow got corrupted. You need to run LiveUpdate again to get a new update list. I just shrugged it off and figured I would fix it later. Then I realized that I could not download other stuff, like updates to SpyBot S&D,iTunes, Typhoon Rising, MS Office
I decided to run a defrag on my computer before going to bed one night. When i woke up the next day my computer continued to reboot itself. It would reach the windows logo screen and run that for a while then i would stall for a little bit and restart. I then would shut it off cause i didnt want to mess with it and it would continually boot itself up and start this process over again. I'm running Windows XP Pro with an Athlon XP processor. I have 2-120 gig hard drives on a RAID. I have tried to do a repair with the Windows XP disk but the disk doesn't recognize the version of Windows already on the drive like it would usually do.
I have Windows XP Home and for some reason, all of a sudden I am unable to run any kind of commands in the Command prompt under Start - Programs - Accessories. I used to be able to run things like system file checker and ipconfig but for some reason I cannot now. Could DOS be corrupted or am I just accessing things wrongly. Last time I tried to run IPCONFIG I received a message that said "IPCONFIG is not recognized as an internal or external command operable program"....Also when I open up the command prompt it says C:Documents and Settings Username.
In a not updated Version of Windows XP you can run (Start-run) "start"command at the Run dialog just typing it, when you update windows andwrite the same "start" into Run dialog Windows shows a error message >Windows cannot find `start`. Make sure you typed the name correctly,and then try again. To search for the file, click the Start button, andthen click Search.If you are in CMD the `start` command works fine but the problem is thein Run dialog windows doesn’t recognize it ?
It's a good computer, corrupted with things that it doesn't need, and I'm afraid to remove anything. Is there a program or someone who can clean things up for me and speed it back up again? I have an 80gb hard drive, 256 MB of Ram, and a great Graphics card. (NVIDIA GeForce If i'm not mistaken.), but I really need to clean this up, because before it was really fast, now on loading up, and just anything it's so slow nowadays.
I'm dual-booting Vista (Vista came pre-installed) and XP, but in order to finalize it I need to get back into XP, booting off the CD. Can't do that anymore. I get a "mountmgr.sys is corrupted" "Setup Failed" error and the computer restarts. It didn't always do this, I've used it 5 times before.I paid $90 for this CD, and unfortunately I don't hvae access to another Installation CD right now.
how would you determine if you're MBR is corrupted? Here is the situation: The user boots up his Windows XP Pro SP2 machine, it does the normal POST and gets to the splash screen, however, it seems after that it will display a standard "Microsoft Apologizes but Windows did not boot properly... please select from one of the options..."
When this comes up, we attempt to launch windows into Safe Mode. It runs displays the some messages (more on the lines of what seems to be in the autoexec.bat file) but suddenly the PC reboots. It does the POST again and then the splash screen then bam same message as above. So we try the Last Known Good Configuration option but it does the same thing. Reboots the PC and gets to that screen.
My friend was attempting to update his integrated graphics driver and managed to mess it up quite badly. The system boots, but the display just hangs on the XP disk checking screen. You can hear the XP startup sounds etc. so I think it's fully working otherwise. Since I can't see what's going on, I can't get to the restore manager etc. to roll back the system to before the driver change. Is there some way to restore the system from within the BIOS or from a command line that will skirt the messed up drivers? I wish I had a spec list or something to help out but I'm doing this over the phone and he doesn't know much about his system.
A few weeks ago I decided to move my music library to my external harddrive since my internal drive was nearly full. I stupidly moved my "My Music" folder, which is labled Julie's Music, to my F drive. At first, iTunes operated fine after I moved my music files, but later it could not find the iTunes library and would not open. I tried moving "Julie's Music" back to My Documents on the C Drive. But iTunes still cannot find iTunes library because it cannot find the My Music folder, even though it is there. I also cannot rename my Julie's Music folder back to My Music. It seems to me moving the folder corrupted it and now I can't open iTunes since it can't locate its library.
I'm on my friends computer right now due to the fact that mine has crashed since this morning. I come home from school to find that I am out fo windows and theres a message on my screen stating that my system32 file is corrupted. I have a cd that came with my computer and I can get into command prompt dos through it. Is there a way to fix this to just to redo the system32 file through dos instead of having me have to lose all of my work and reinstall windows.
I am running Windows XP Professional. I am trying to delete some of my Internet links from my Favorite Folder, but the error message I get is "Cannot Delete [name of link]: The file or directory is corrupted and unreadable." I have tried overwriting it with a file of the same file name, but I only get a new error message which says, "Cannot move [name of link]: A file with the name you specified already exists. Specify a different file name".
I have even tried shifting to Safe Mode, but to no avail. I still get the same messages. When I double-click on these files, I get the error message saying, "The target "" of this Internet Shortcut is not valid. Go to the Internet property sheet and make sure the target is correct". I cannot even move them out of the folder into another one that I made that I named "Dead Shortcuts". When I tried to move them, I got yet another error message saying, "Cannot move [name of link]: The file or directory is corrupted or unreadable". When I open Properties, nothing is there except the "General" tab. There is no "Web Document" tab or "Security" tab.
when i attempt to log in by typing my password i get 2 messages. Windows cannot load the locally stored profiles. Possible causes of this error include insufficient security rights or corrupted settings.Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make will not exist after you log off and then, i get booted onto a generic desktop where i can then access most of the files from my own desktop by going into the my computer, clicking on drive C, then clicking on Documents/Settings, then my name, then Desktop where most of the things from my old desktop are residing. the one thing i really want to access is my Outlook which contains several different calendars that i need to look at, but when i click on that it doesn't recognize who i am and i get a generic Outlook.
My wife's laptop tried to automatically update to Service Pack 3. When it restarted, I get the Windows could not start because the following is missing or corrupt:windowsinfiosinfo.inf You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM.Select 'r' at the first screen to start repairMy problem is I can't get to the Recovery Console. When I try, I get the blue Windows Setup screen, with the little gray bar at the bottom that loads all the crap, then I get a blue screen that says "A problem has been detected and windows has been shut down to prevent damage to your computer, some other stuff and then
I try to sync my thumb drive in Sync-Toy. There is an error in J:Guitar MusicTracksGeoff AchisonGettin evil.I begin to investigate.they used to be MP3s, and they weren't like this when my guitar teacher gave them to me. When I try to delete them I get - "Could not Delete file. Cannot read from source file or disk".Luckily, this THING didn't copy across to the copy on my hard drive (C:Guitar MusicTracksGeoff AchisonGettin' Evil)
I changed some start up settings, and when the pc restarted everything was wrong. Media players didnt work; printer driver just disappeared; Outlook Express was messed up; AIM couldnt log on; and the desktop toolbar changed color. Will some1 plz help me, can I still fix this somehow or I just have to reinstall the OS? ps:System restore was all erased 2
I rebooted after a software install and could not get back into Windows. The machine just does a continuous reboot after the XP Splash Screen. Finally got it to give me a corrupted registry file error message. After googling, it seems this has been fairly common occurrence. A simple repair install, right? Well, my OEM version of Windows does not give me a repair option(something else that many people have found with all different versions of Windows) I can get into the Recovery Console but this is not what I need. When I skip the RC and press F8 at the Licensing Screen I can get to the "Repair Screen" but when I highlight the installation of Windows to repair, THERE IS NO REPAIR OPTION, only a INSTALL option and pressing 'R' does nothing
My daughters laptop dell inspiron 1100 [ xp home] failed to boot up. Checking dell's online help, corrupt registry was diagnosed. In trying to recover the situation, I For instance, on the setup-page 2, the configure setup is now disabled and I cannot find how to enable it. In addition, my other daughter has deleted the fat32 partition. Don't ask me why.
Now I need to get it working again. I have all the disks.
