Nfiosinfo.inf Is Missing - Corrupted - CD ROM
Sep 8, 2008
My wife's laptop tried to automatically update to Service Pack 3. When it restarted, I get the Windows could not start because the following is missing or corrupt:windowsinfiosinfo.inf You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM.Select 'r' at the first screen to start repairMy problem is I can't get to the Recovery Console. When I try, I get the blue Windows Setup screen, with the little gray bar at the bottom that loads all the crap, then I get a blue screen that says "A problem has been detected and windows has been shut down to prevent damage to your computer, some other stuff and then
View 10 Replies
ADVERTISEMENT
Jun 21, 2010
I am running Win XP Mediaa Center Edition 2005 and have just received a message on the second boot up page saying:
Windows cannot load because the following file is missing or corrupt:
WINDOWSSYSTEM32CONFIGSYSTEM
You may attempt to recover or repair this file using the original Windows CD
View 2 Replies
View Related
Jul 5, 2005
I restored a partition with Drive Image and am getting this message. It's worked fine for over a year but now a problem. I might have marked the partition active or not, I'm not sure. Older versions of the partition don't work. I think the boot.ini is ok. I checked it and can't find a problem. I copied HAL.DLL to all of my drives under windows/system/32 to see if booting was going to another drive and a different error message would appear. The first time it booted to the first choice in the boot screen and after that gives the same missing or corrupted HAL.DLL I've downloaded stuff from Microsoft but thought Symantec doesn't have good tech support any more; not like PowerQuest or whatever their name was.
View 6 Replies
View Related
Apr 13, 2005
Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM
I found this soultion online and followed it to the marked point:
View 5 Replies
View Related
Oct 2, 2009
I just put in an ASUS mobo, and my XP Pro OS just sent me a message that Windows wouldn't come up because a dll was missing or corrupted. <Windows root>System32hal.dll. I'm in the Recovery Console, and I went to Systemroot, but the command <Windows root>System32hal.dll. is invalid. Other than reinstall XP, what can I do to find or get that hal.dll.
View 11 Replies
View Related
Sep 24, 2008
My CD ROM/DVD player recently stopped working on my Omitech computer. From My Computer - I can't see the drive anymore. In the device manager - it has a yellow exclamation mark on it. I tried updating the driver but the message was that the software was already the best match. I tried uninstalling and reinstalling but it says a file is missing or corrupt. I bought a new external CD ROM - but have the exact same problem with it. I went to Run and put in sfc /scannow and there were problems that maybe could be fixed - if only it could read the XP CD - then it could fix the CD ROM. But it can't read the CD because of the problem with the CD ROM. (a whole in my bucket story.) So - how can I fix the problem if it wants a CD to fix the problem but the CD ROM is not working to read the CD?
View 3 Replies
View Related
Jul 27, 2005
I am working on a Dell laptop that belongs to a friend of mine. She has a history of deleting folders she doesn't think she needs (can't cuss at her enough, it'll never stop!) Somehow she managed to end up with all of the Admin accounts corrupted or missing. It was actually to the point that the only User that would get past the login would fail afterwards and it would load setting from "TEMP" user.Anyway, the problem is that the only user left that will log in has the lowest permissions level possible which means I can't do anything to correct the problems. I actually managed to use the "Backup" utility to restore enough of the one user that works so that it no longer fails and accesses the "TEMP" user There are two different accounts that had Admin status, both of these say "accessdenied" if you clink on the folders, but if you just hold the cursor over the icon there is a popup that says "empty", both of them.
View 2 Replies
View Related
Jul 3, 2008
I think I have a corrupted OS in my hands. My computer worked fine yesterday. This morning I added an extended SATA hard drive. When it booted, Windows XP (Pro SP2) startup seemed unusually slow. After I used the hard drive manufacturer's CD to partition the HD and rebooting, I could not get on any of the limited XP accounts because it required a password when it should not have. I am posting this from Firefox, which with a number of other programs unrelated to Microsoft seem to work for the moment. I think I'm missing system files or they are corrupt. I've recently had a Vundo infection which I did clean up, but now I can't even open Malwarebytes Anti-Malware.This would be extremely horrifying had I not had past computer problems of equal horror. I beseech all you benevolent souls reading this to provide some suggestions. Is there anything I could do aside from reinstalling XP?
View 7 Replies
View Related
Oct 29, 2006
My computer is a Dell Inspiron 6000 running Microsoft XP Home. My machine did not ship with a XP Home setup CD so I cannot follow the windows prompt. I have heard about dell system restore CDs, however I'm not sure if one came with my machine, and if so where it is. If this is what I need can an ISO be downloaded anywhere online? I do know that there is some type of partition on my HD, however I'm not sure exactly what it consists of or how to find out.In case anyone asks, I cannot boot windows in safe mode. If possible I would like to try to repair this problem without a complete reformat and reinstall as my data is only partially backed up. Additionally I have considered the possibility that this issue is the result of a HD crash, however I am not sure how I would go about testing this. Lastly if a reformat and re-install is necessary is there anyway to backup "My Documents" without starting windows?
View 7 Replies
View Related
Jul 20, 2008
recently me my brother and sisters computers all got the same virus it seems and where all on one wireless net work and it started with my sisters laptop sayin the harddrives not instaled wheni start it up and nothing els and my brothers desktop kept feezzeing like my desk top did then mine stoped turning on all togther and would get to the desk top and crash and take 3-4 trys to get started then i did a destructive system recovery on my brothers comp and it is fine perfect like the day we got it then i did it to mine and it started up and worked but kept frezzing on the desk top and then now when i start it up and try to restore from last know workin configuration it says windows/system32/config/system is missing or corrupted hit r to start repair from original cd rom disks and i dont have those is there a way i could find this file and put it on a cd form one comp and fix my comp with it? or do i have to go buy a new windows and hardrive? and when i try to boot it any ways it says system not fully installed error
View 2 Replies
View Related
Aug 10, 2010
can you help me with this error windows/system/drivers/pci sys is missing or corrupted on windows xp professional?
View 1 Replies
View Related
Feb 22, 2006
I have two partitions on the same drive and both had Win XP installed. I decided to reformat the second partition, and for no particular reason decided to install Win 2000 there. Now on boot up I get the normal boot.ini menu but if I choose XP I get an error that says Win 2000 has a missing or corrupted file: WINDOWSSYSTEM32CONFIGSYSTEMd……..SYSTEMd not a misprint! I hit reset and choose Win2000 at the boot menu and Win 2000 comes up OK . I tried to repair 2000 and I re-installed it but still get the same error. I tried modifying the boot.ini file but it didn't.
View 3 Replies
View Related
Feb 14, 2009
Trying to repair my son's laptop--Dell Inspiron 6000 running XP professional, cannot start-up due to above error message.tried steps outlined in link below from Microsoft, but get "access is denied" at every prompt
View 8 Replies
View Related
Sep 28, 2009
I am new at this so I will try and post as much relevant (or possibly no) information in hopes not to waste anyone's time. I receive the following message each time I boot up my Dell Latitude 400 with Windows XP update with SP1 and 2: Windows could not start because the following file is corrupt or missing: windowssystem32configsystem. You can attempt to repair this file starting Windows Setup using the original Setup cd-rom. select "r" at the first screen to start repair.
View 1 Replies
View Related
Nov 16, 2008
I got the following message upon booting my pc.STOP: c000021a {Fatal System Error}Te Session Manager Initialization system process terminated unexpectedly with a status of 0xc0000022 (0x000000000 0x00000000).The System has been shut down.The day before I did a windows update.I can not boot into windows.. Not even Safe Mode or dos prompt.
View 13 Replies
View Related
Sep 6, 2005
Installed new cd rom still doesn't work. In device manager its says for both cd rom devices( Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)Tried to uninstall and reinstall no luck. I may have deleted something important in either Nortons Spybot or spyware. I deleted a bunch of problems detected by one of those and then read it might not be a good idea because it could effect other prop in your PC
View 2 Replies
View Related
Jan 4, 2007
My Problem is,I got an error come up "windowssystem32configsystem" missing or corrupt.How do I repair the registry without a windows xp disc and is it easy if it can be done
View 1 Replies
View Related
Dec 30, 2008
while using the Windows XP Setup disk to partition the new drive, I accidentally used the "Create Partition and Install Windows XP" option, instead of just creating the partition. Unsurprisingly, Windows freaked out at having two copies installed on the computer, and it took me quite a while to salvage the thing so it would boot. I ended up using the second Windows install (on D: on the new disk), and left the old, unworking Windows install (on C:) dead on the original Western Digital drive.
View 14 Replies
View Related
Oct 27, 2006
My computer was OK since I shut it off last night. I don't know if I did something wrong to it. This morning, at the logon menu I was surprised~ There are many message boxes appeared saying that Program files is corrupted and bla bla bla~ If my dad knows this, I'll get grounded. The next thing I realised is, there are these start bar messages telling me " The file or directory H:Program Files is corrupt and unreadable. Please run the Chkdsk utility" and H is where my program files folder is because I renamed it from C to H.
View 3 Replies
View Related
Nov 27, 2009
I was exiting a game and windows started getting really slow and i could not click on anything so i held my power button on my computer and shut it off. When I started it again it said "Windows could not start because the following file is missing or corrupt: windowssystem32configsystem" then it says I can put my original CD in and go to the recovery console. When I did this I got to the first step in a tutorial online where I type "copy c:windowsystem.... etc"
View 6 Replies
View Related
Dec 29, 2008
My wifes laptop(which had 3 yrs of mba coursework on it) has just had her user acct corrupted/no documents/no pics.i tried recuva and it said not to restore files to c drive,so i restored them to a usb drive.problem is they just look like shortcuts.my son was surfing the net when mozilla went down abrubtly.when he tried to go back on mozilla it crashed 3x.he then restarted and thats when my wifes account came up corrupted and w/missing files+pics.it now has the windows default wallpaper.
View 5 Replies
View Related
May 29, 2008
I get an error on boot up telling me that the config file is corrupted or missing. IT also states to please insert CD to try and repair this problem. Press "r" before the first screen. If I do that will it try and reinstall XP? Will I lose all my data?
View 7 Replies
View Related
Apr 5, 2005
I'm running Windows 2000 Professional, and encounter the problem: "The file hal.dll is missing, please replace it or reinstall it". That shows up when i try to boot it up.When restarted, it looks like its about to load windows 2000, then it stops and says"The file Hal.dll is missing or corrupted,please reinstall to replace it" . I wanted to go to safe mode, but it wont load because of that corrupted file.
View 6 Replies
View Related
Jul 6, 2006
just had a machine where the boot ini had been currpted so do a chkdsk /p then a fixboot in the recovery console and it came back fine. But now it boots soooooooooooooo slow about 1-2 mins but once up it is fine. It shuts down fina as well. Done all scans virus adaware etc so the machine is now clean. So how do I speed up the boot.
View 6 Replies
View Related
Oct 5, 2010
About 6 months ago I installed a 500-Gig Maxtor External HD I use as a "back-up" source.When I first installed it, it worked fine. Then I had a system crash and had to re-install WindowsXP Pro. Now this external drive is not recognized. A drive icon is also not displayed in My Computer. In System Hwde Devices, there is a yellow exclamation mark next to the (Maxtor 500-Gig) USB Mas Storage Device. I have made several attempts to uninstall this drive and re-install it but the same identical message appears each time: Mass Storage Device Not Recognized. I'm also getting a Code 39 error code informing me that the drivers for this device are either missing or corrupted. Some time ago I was told that I would have to uninstall and re-install Windows XP Pro if I wanted to correct this issue. Is this true?
View 4 Replies
View Related
Aug 5, 2007
I am havinga very big problem with my PC. When I try to start it up normally, I get the following message; "Windows could not start because the following fileis missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair" When I try this, it opens repair console, but then I have to select OS, and when I do this, it just comes up with the previous error. If I try to reinstall it comes up with a blue screen error and crashes.
View 7 Replies
View Related
Oct 14, 2007
The system can be restored by using the Startup CD and pressing R for recover, but I do not have any cd. The only one I have it the recover cd, but it is my understanding that if I use the recovery cd that I will erase everything from my computer and I can not do this.I tried to read the other threads about the same problem, but to be honest I do not understand them and I just do not have the startup cd - maybe it is the same as the recovery cd?
View 9 Replies
View Related
Dec 15, 2008
When I start the laptop, the first black screen loads, and then directly skips to an error message saying "Windows cannot start because the Windows/system32/ config/system file is either corrupt or missing." Then it prompts you to try to load Windows using the installation CD.which I do not have! Whoever's reading this, PLEASE please help me, the laptop's like, my life, and I haven't had the common sense to back up anything
View 12 Replies
View Related
Nov 13, 2008
This follows on from a previous discussion that is now closed, except my problem is a little different. I have an ACER laptop and am trying to install Windows XP Home on a brand new hard drive, but shortly after the drivers start to download/install I get an error that says that "the file vga.sys is corrupted" and then I get kicked out of the install. I assumed it was a problem with the disc, so I tried 2 more and had the same problem. What can I do to get past this point?
View 1 Replies
View Related
Jul 5, 2010
I was having difficulty reinstalling my OS, it seems that the asms win XP SP2 is corrupted, wht should i do?
View 1 Replies
View Related
Jan 13, 2008
I have created a command file called Runinstall.cmd in C: I put these lines in Runinstall.cmd to call another command file (Install.cmd) in different location,the Runinstall.cmd can call the Install.cmd in different location , but some silly things occur.I use Install.cmd to install software programmes.As the installers or items are in the same directory as the Install.cmd, I can just specify the file names without specifying the path of the files in the Install.cmd.
View 1 Replies
View Related
