Windows XP is my OS. i accidently set my video settings to TV-Moniter, when i dont have a TV hooked up to my comp, so i couldn't see anything. So then i booted up in Safe Mode, and then i could see because of the compatibility driver, so. then i boot up in Last Known Good Config, and I'M STUCK WITH SAFE MODE SETTINGS no sound driver running, task bar is the ugly gray one, and you know just stuff like that
View 14 RepliesI had media player 9 than I upgraded to 10 thinking it would solve the problem but it didnt. Everytime I play an mpeg or an avi file(or any video file) I cant control the brightness, hue etc it just snaps back to default settings everytime I move the slider to the left or right.
View 10 Replies View RelatedPCI device is missing - I think this killed my second monitor?I have just bought the macpro and I am running boot camp on it. I am a little computer illiterate so please bear with me Everything is now working perfectly except that I can't seem to get my second monitor working in XP mode. The option for it doesn't exist under "right click - properties and then settings"I have looked online and it looks like my PCI? device has something to do with this. I know that everything is working great on the system except that PCI has the yellow question mark beside it. I don't know what PCI is, but if it is my problem,
View 5 Replies View RelatedThe problem is that whenever I "switch user" (win + L) out of my account for someone else to log on their account, when they try logging off, my monitor acts like if I was putting the computer into sleep mode. That is, it goes black and some messages come up on the screen saying the usual "check power etc" messages and the light flashes. The computer continues to run and there is no way of restoring my screen so I am forced to press the main power button on the computer tower.
View 9 Replies View RelatedMy computer is windows XP and Pentium 4. I had problems with booting the computer for a few months now and has gotten worst. When I press the reboot button, I hear the PC running, but the monitor is just blank. I had to click the reboot button MANY times before it starts, and whenever it does, I hear a beep sound and this green light flashes from the CD drive. After a few months later, I did it again but this time I don't hear the beep or see the green light flashing. So I figured out a way to make it work, and it was by clicking the reboot button like 10 times, then switching the back switch on the PC off, then turn it back on and reboot again once. So I was wondering if there's a problem with the monitor(about 9 years old),the graphic card(renewed it recently) or something else.
View 6 Replies View RelatedMy pc was running just fine but when cut off it wouldonly cut back on when it wanted to couple hours couple days It got to where I didn't cut it off.. justrestarted it otherwise it worked great well lightsblinked a month ago and I haven't been able to get itto come back on since.... but the little light inside is on There is no noise whatsoeverjust kinda like it is dead I took the switch off and took it to two places to try tobuy another and they said those things never go badit had to be the part it was hooked to on the motherboard. My question is can they fix this without having to replace
the motherboard?
I am running Windows 2000 professional edition. I have a S-video hookup on my computer, but never used it until tonight. I hooked it up, and then hooked it up to my tv. No display on the tv. So I went in to monitor advanced settings, and I found the settings for tv. The only way I got it to display on my tv was by clicking the same display icon that the monitor was on. I don't know the technical term for it. Movie playback was great as a test, but I needed to restart because of other things on my computer. When I went to restart it would get as far as booting up windows, and then I got a blue screen. It flashes so quickly before it goes to try to restart again that I can't catch it, but from what I have gathered it said something about not enough physical memory. The only thing I can figure is that the computer is trying to display both on the tv, and the monitor at the same time, and being unable to do so because of memory limitations. I have no idea how to set it back to only boot with the monitor instead of the tv as well. I tried unplugging the tv from the computer, as well as unplugging the monitor and leaving the tv connected. No change. I also attempted to boot in to safe mode and was unable to do so.
View 10 Replies View RelatedI have my 3 computers hooked up to a router. On my main PC, I use to be able to boot up my computer directly to my desktop. For some reason now I need to click on my user id name to get to my desktop. How can I stop this from happening so I can logon directly to my desktop? OS is XP Pro.
View 13 Replies View RelatedFor some reason for the last 3 days my internet connection has gotten worse and worse i just reformated and reinstalled windows i have a linksys router and 2 computers hooked up to it and one playstation 2 for online gaming i looked at the setup online at 192.168.1.1 and it says i have 2 clients one at 192.168.1.100 and 192.168.1.102 mine is at 102 is there a reason it skips over 101 because mine use to be 100 and the other computer 101 why is it now 102?
View 3 Replies View RelatedI have a Dell Dimension 2350. It will decide to shut down on it's own. I can tell it actually shuts down because windows doesn't try and run a chkdsk when I start it back up. Anyway I made sure to check my power settings and everything is set to Never shutdown or hibernate. It is also not hooked to the internet or a network. Just left it on doing nothing for about an hour and a half, came back and it was off. It actually only accesses the internet when I run Windows Updates.
View 12 Replies View RelatedI have had this program downloaded but never installed for quite a long time already....I asked a friend of mine the other day to use the program to back up her computer drivers using it so we could determine how exactly it works, and if the results were what I hoped for, she could then burn the folder to a cd. The reason I had her do this was because she had put in a new harddrive that I had already installed windows to for her on my system, which meant that it was configured for my own hardware and not hers by the time she got the drive in the mail from me, and once installed, no amount of playing with the drivers including new downloads would work. So I had her hook up her still available old drive, run this program and burn the files to a cd so once the new drive was hooked back up again, those drivers could be used since they worked fine on the old drive.
I was massively impressed with the outcome and saw the real potential for having all working drivers available for any new installations for anybody in that kind of situation of having to format the drive and starting over....
i screwed up my registry, and of all things it was the keyboard driver or something, so theres no hope of fixing it on my computer. ive got the drive hooked up as the slave on a different computer, but i cant figure out how to edit the registry on my drive rather than the primary drive. is there any editors that will open it from a file? any way of decompiling it? theres got to be some way to edit it. also, they are both xp.
View 4 Replies View RelatedRecently I was playing a game, when my screen froze. I then shut my computer down to restart it, used it a few times (in 4-bit safe mode), then after I shutdown again, I cant log back in... it just freezes and the screen flashes, I cannot boot into my computer setup (default f2) or into safe mode (default f8), however I can run the XP cd and get into the recovery console, is there any way that I can change the boot sequence from the recovery console? The screen is dotted with a bunch of dots up and down the screen in columns, and is in 4-bit video mode.
I have a Dell xps gen 5 with xp home.
the error I get is:
"Error: Cant enter setup. Video Mode 103 not supported by this video card."
I have managed to put video footage onto my PC from a video cassette (by plugging my VCR into the TV aerial socket). The video footage is saved on my PC as .mpg files & when I open them, they play fine on Windows Media Player.When I import them on to Windows Movie Maker, they are recognised as video footage and I am able to put them into the collections as video. However, for some reason, when I drag them onto the timeline, they go onto the audio line & I can't get them to go on the video line, so when I play it, the sound plays but there is no picture. I have tried saving them as .AVI files but that makes no difference
I have window XP SP2 installed on my laptop. I also use InterVideo WinDVD Creator for video editing. Recently when I try to import video file into my application, my laptop, processing percentage goes up to 98%, and the application just freezes up. I also tried the Microsoft movie maker software and I get the same result. I was wondering if I need to reinstall the application or there is something that my laptop is missing. The application was functioning fine until 2 days ago, and since then I haven't installed any other application.
View 8 Replies View RelatedMy Windows Media player 10 is trying to play some video clips as songs rather than video clips. This has only recently happened. Do I need to purchase some
decoder to fix it or is there a down oad for it?
Some of my video files are not working for want of Indeo Video Codec. I have been working on a video convert tool as my last application. I do not know what happened and this got corrupted. It gives pop up message for MS Encarta Video files saying "The program you are trying to run requires a current Indeo codec To obtain a current driver that is compatible with this version of Windows, please contact the manufacturer at http://indeo.ligos.com.". When I check with them, they ask me to contact OS supplier
View 2 Replies View RelatedThe problem is the computer keeps losing its video display. Just went black. I reinstall the drivers and restart and the computer runs fine. Use fine, then after its been on for awhile it goes black again. Weird. I have the newest drivers and all the windows updates loaded. It just keeps going out. I have tried several screens as well to rule out the monitor freaking out.
View 1 Replies View RelatedI found images in Windows Picture and Fax viewer that I want to delete. I can delete them one-by-one, but that takes time. I went to Disk Cleanup up and deleted all Temp and Temp internet files, but the images are still there. I checked Properties of the images for the file names, went to Win Explorer, but only found C:Documents and Settingsuser, there was no subfolder for Local Settings and, obviously nothing after that. I did a Search in Explorer, including hidden files and folders, for the file names and the searches resulted in nothing. I am back to deleting one-by-one, but my concern is, Where did everything from Local Settings on go to. BTW, I also run Skybot, Adaware and Norton virus weekly
View 14 Replies View RelatedWhen I started up it says Win.ini corrupt. Then it starts up as a new user losing track of Favorites and Start Menu and Desktop Icons, Display and Folder attributes. Under
Documents and Settings it has added Dave.U5R2D5 in addition to Dave which still has all the information. I tried switching the 2 Filenames to get back to what it used to be but gave an error message and didn't do it and started another new file.Is there some way to use the old Dave file?
I imported a video of 90 min length onto my computer. When I imported it into Movie Maker the final quarter skips and the video and audio are disjointed. What caused this?
View 3 Replies View Relatedjust got a new computer recently and updated the media player to windows media player 11 but when i try to play a video file it just plays the audio with no video.. anyone know why this is or have any tips?
View 4 Replies View RelatedI hooked up my Xbox to my PC to play online using my monitor, only to find out that my NVidia Geforce4 Ti 4200 can only display a max resolution of 720x480 through my capture software, and this ain't good enough for me. Does somebody know of any specific card/adapter TV Tuner that has an S Video input and could give me resolution over 1024 pixels under $100.
View 3 Replies View RelatedI want to install a video card to my pc but I want to keep onboard video active so I can run two monitors.
View 1 Replies View RelatedI'm having a major problem with XP Home Edition. When I start my computer, I get the Loading Settings screen, which automatically switches to the Saving Settings screen and then goes back to Loading Settings, Saving Settings, etc, etc, (the "Windows XP Startup" and "Windows XP Shutdown" sounds repeat themselves one right after the other). By the way, I have the XP tweak that skips the Welcome and log on screens at startup since I'm the only person that uses the computer. I've tried Debugging, Safe Mode with Command Prompt, Restore To Last Working Settings and a few others, but nothing is working. I ran Spybot just before shutting down the computer the last time it worked and got the "Congratulations! Your system contains no spyware" message. When I restarted the computer, I started having this problem. I also have Norton Anti Virus 2004 and did a Live Update (manually) a few hours before this started happening.
View 14 Replies View RelatedFirst of all I'll start by informing you THIS IS NOT A HARDWARE ISSUE! (all caps for emphasis not for anger.) I need to know how to fix this fast clink the link for the video there's two parts it's not long each part is only a minute long.
View 1 Replies View RelatedMy kid just disabled the video adapter on his XP Pro machine (Compaq, PII, on-board video) and now the initial Win XP screen comes up then goes dark once it gets mostly through the boot-up. It won't do any different in safe mode and even installing an AGP video card didn't get me around this. Short of reloading XP, is there a fix for this? Also tried reloading default BIOS settings just in case, no change.
View 5 Replies View Relatedi have a problem with windows media player, whenever i try to play a video, it says play at the bottom left hand side of the screen but nothing plays, audio, or video, what do i do?
View 2 Replies View RelatedI was working away on my desktop tonight, and suddenly the monitor started freaking out. Here is a video to show you what's going on at startup, When it happened I was working in Cubase. I'd just reset the audio driver, and it started doing like in the video. After a little bit, the signal cuts out completely. It's not the monitor, I've checked with a spare and it's the same. I don't have another video card around at the moment, but I'm wondering if it's likely to be an issue with the hardware, or software/virus type stuff.The computer is XP, 2gb ram, nVidia Geforce card (sorry, can't recall which one) etc. Incidentally the card itself looks fine, ie it doesn't look like it's shorted or anything.
View 1 Replies View RelatedWhat is the "Temp" folder for which is at C:Documents and Settings Admin Local Settings Temp? Nothing seems to appear there while I use IE to browse.
View 3 Replies View RelatedFiles and settings wizard does not replace files and settings after re installation. of XP. After several tries I got a copy of FASTconv, a command line program, to extract the files. It has been a long time since I used a command line and the command is complex. I have set the command follows........ fastconv /V /S:source store /D:destination store /T:temp store /I left out the /I switch so all files in the Dir source store would be extracted. Same thing happens when I put in /I switch.I named the Dir. source store, destination store and temp store. When I run it I get instructions on usage and a command prompt What am I missing?
View 2 Replies View Related