I have a Compaq Presario with XP. I responded to update iTunes, and it wouldn't recognize I have XP. Now I lost the iTunes that I had installed, and have nothing. Spysweeper I went to upgrade and got error ''We have detected Windows 98 or Windows Me as your operating system. We recommend that you download a version of Spy Sweeper 4.5 that supports your operaton system'.
Trouble unistalling itunes and itunes helper. I'm cleaning out for some space and rid myself of programs I don't use.I've tried to uninstall itunes and itunes helper I have used windows add/remove program to no avail. Tried numerous times but it/they remain, even though it says complete. Reboot etc. nothing. Any tricks or procedures or to get rid of it/them for good?
When downloading a files, I usually save to desktop then right click to do a virus scan,but Spysweeper does not show up.Is there a way to include Spysweeper from right click.
After the sweep I have 100-150 MB less available memory than when it started, which is only corrected by a system restart. I only noticed the problem after I had been online with my MSN dial-up during which a system sweep had occurred. Any feedback and reply would be greatly appreciated.
I am new to post on this site, in the past i've read many posts on it when i had computer problems, and found a solution, except this time so here it goes I updated SpySweeper to the newest version. My computer is now SLOW so i tried to uninstall it. I tried doing so through Add/Remove Programs. Also tried going through 'start,run'..then locating the file to uninstall. I get the following 'Cannot uninstall - Runtime Error (at 219.73) could not proc.'SO tried going through Safe Mode and then my computer started running CHKDSK, which came back with about 20+ unreadable file segments the just started back in Normal mode. I also tried ctrl alt&delete to stop spysweeper processes and that says "access is denied'.
After recovering from a Windows XP Home SP2 crash, I received a message to reinstall iTunes. When I tried to uninstall in Add/Remove Programs, in preparation for reinstalling,the UninstallShield Wizard came up and then disappeared with no follow-on.
I have a Dell DimensionC521 pc, windows XP home edition SP3. My default browser is Mozilla Firefox and I am using the free versions of avast and zonealarm. I have tried repeatedly to download i tunes. I go to the website I am asked for my email address and where I am located. I then click on download now and nothing happens.
I seem to have never been off these boards since I took over my husband's computer after he died in February. It is almost new and I gave my own two year old model to a needy friend.I had my friendly neighbourhood computer guy who "fixes" things for me, to transfer all my files and programmes from one to the other.One of the several items which I can't find is my iTunes. Over the years I have compiled a fairly comprehensive list of music which I downloaded to my iPod. Now my iPod has died of old age and apparently will cost more than it's worth to repair. I don't mind buying a new iPod but i do want my tunes back.
I keep getting this message when I try to download itunes, and I have two brand new ipod nano's that I can't use until this problem is solved. My computer is a ComPaq Presario 6000, built in 2002, with Windows xp home edition. could not open key Hkey_local_machinesoftwareclasses.cddaopen with progIds. Verify that you have sufficient access to that key, or contact your support personnel.
My Windows XP and iTunes seem to conflict with each other. My purchased songs stick or studder sometimes when I play them and visit websites at the same time.
Ok this morning i downloaded the new itunes 7 an when I went to use it the songs were all distorted an it locks up my system. So if youre thinking of downloading it I wouldn't do it. an does anyone know where I can get a link to the itunes 6.
I've been having a small problem with Roxio's Easy CD Creater 6. I installed the program on my computer an I was able to burn Cds and DVDs ok. Then I installed iTunes to connect to my iPod. I then tried to use Roxio and it could not find my DVD RW drive!! I then uninstalled Roxio and then installed it again. I could then find the DVD RW drive but iTunes said it could not initiallize the drivers to burn CDs. How do I setup my computer so I can use multiple CD/DVD buring software packages?
i was just playing some music on itunes and once again it gave me the blue screen, now im use to it always doing this when running any media software or watching videos online etc. i got a message i never seen b4 so i just would like someone to tell me if i can disable whatever it is thats causing it.
STOP (0X0000008E, 0X00000005, 0XBF8F556D, 0XAE44FAA8, 0X00000000 WIN32K.SYS- Address BF8F556D BASE AT BF80000, DATESTAMP 45F013F6
it also said if the stop message displays the error driver, then disable it or try changing the video adapter? never got this message before. can i solve this matter by the obove information
I wanted to remove iTunes from my PC, but my PC complained that it couldn't find missing "strings". I attempted a reinstall, but got "1628 installation failed " message. When my PC boots up however, it loads iTunesHelper and iPodService and mDNSResponder and there are shortcuts on the desktop, but no entry in the Add/Remove Programs list. I have followed the advice on Consumer Install Shield (eg emptied temp folder, tried to use the Windows install clean up tool) but still can neither install, nor unistall iTunes, nor Quicktime. i have Win XP with SP2, Soundblaster Audigy,Athlon 1800+, ATI Radeon 9600
from my limewire i bring the music into my iTunes library and was wondering if there was a program or somethign that scan my library and complete artist, song name, cd, and album, and all the other data without having to go through all my songs and find the info.
Cannot download latest i-tunes/quicktime program. Error message directs me to install latest version "isscript.msi". Same error. Even Loaded new driver. Same error..."install script engine on this machine is older than the version required to run set-up." I have no other downloading problems.
I have an Insignia D400A, 2.8 GHz Intel Pentium 4 processor, 512 MB RAM, 64 MB Video Memory running Windows XP Home SP2. I was curious if I could defrag my hard disk while I am listening to music using iTunes. I only have one hard disk and all the music is on that hard disk.
Apple introduced a new social network in the latest version of iTunes called Ping that allows you to "follow your favorite artists and friends to discover the music they're talking about." If you are a music junkie that does not use Facebook you will love the service, for everyone else, almost all of the features already exist in the Facebook world. Although using Facebook may not be as elegant as using Ping, it is worth the few extra clicks to avoid another separate list of friends and likes.
I installed Windows Vista 64 at one point, but my wireless usb adapter didn't have any drivers for windows vista 64 so I reformatted my entire hd and reinstalled win xp home. anyway, the problem is I cannot install the new version of iTunes,openoffice, and Steam. There's probably more programs out there that I cannot install, so I really want to resolve this issue as it is very annoying. everytime I try to install any of these programs i get this message. "The installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package."
I recently added 2GB of RAM to the 2GB I already had installed. My system is showing the RAM as being there in my BIOS, but, when I run DXDIAG only 1GB is showing out of the 4GB I have installed . Is it because of the Windows version I am running and if so, what can be done?
I have Windows XP Pro installed with all the updates. I have an Asus P5ND2-SLI Delux motherboard (it takes DDR2 533 and 667 memory). I had 2GB of DDR2 533 memory; I removed those and installed 4GB of DDR2 667 RAM (Kingston KHX5400D2K2/2G). When Windows XP runs, it shows 2.25GB of RAM only!! The BIOS sees 4GB of RAM and I ran Asus PC Probe and it sees all four 1GB modules (a total of 4GB) ... what shall I do to get XP to see the 4GB of RAM? Shall I reinstall?
My DVD drive was working fine and I was burning discs. Now for some reason I get error Disc is not writable insert a writable disc. I tried 5 different blank discs and got the same answer. So I ran Microsoft Fix it and got the message that this drive is not writable. The drive is a dvd burner but Windows XP is only seeing it as a CD drive.
I'm trying to o/c my Opteron 148 and after numerous failed reboots at higher fsb this is what I get. Wan'ts me to logon and reenter my password. Only now it's not recognizing my password. Tried safemode for administrator and same thing, my password is not working. I hate reinstalling is that what I'll have to do again?
I have a Samsung SATA hard drive, a Sony CRX225 CD-RW and a Plextor PX-708A DVD-RW. I hadn't used the burners for a while, now they aren't working (can read from them but most of the time won't write). In the device managerdriveproperties, Win XP sees them all as SCSI devices. How is this possible? The BIOS has them as IDE primary and secondary drives, so where does the SCSI come in? Could this be part of the burning problem I am having?
I recently turned off a lot of XP services that I thought I didn't need so that I could free up some CPU cycles for my flight simulators. Now, when I try to burn files to a CD, I get a message telling me to insert a CD-R into the drive? I'm using the program built into Win XP and it seems to start normally, it's just not recognizing the CD-R. Strange, but the CD burner was recording fine until I turned off the services. It plays fine otherwise. I've tried turning services back on but no luck. Does anyone know which service may enable this function?
I'm having some problems with installing certain programs on my computer, like Windows Live messenger and Windows Blinds. For some reason they're not recognizing the Operating System as Windows XP. Since the newest versions of the programs only run on XP or higher. This is strange because i know for a fact that I have XP Home SP2, I've had it for like 4 years or so.
Now, it's strange that this is happening because I had Windows Live messenger before, I wanted to try it out and I didn't like it so I downgraded back to MSN messenger, but now all of my friends are using Live and some things just aren't compatible with both like the Video convo thing. I tried reinstalling it but it says that I require to have Wind XP or Later, same thing happened with Windows Blinds 6.0. I tried installing Win Blinds 5.0 or something like that and it worked perfectly fine, because it's compatible with lower versions of Windows such as 2000, NT and ME.
My Dell Dimension desktop is running Win XP Media. A few days ago the mouse simply stopped working and on a reboot it did not fix it. I was using a wireless keyboard and mouse and noticed the light was not coming on on the receiver/transmitter so thought that perhaps that might be the problem. At the time I did not have another keyboard with a usb plug, my childs pc had a ps2 keyboard and i do not have a ps2 port. So I used my childs pc and my wireless keyboard and mouse work perfectly on it, including my transmitter/receiver.
The problem is obviously not with the hardware since they do work on her pc. I did however purchase a new keyboard and mouse - usb this time. I get the same issue. The keyboard works fine as I am able to boot in safe mode, enter the set up etc and can move around in those screens. As soon as it hits the XP log in screen though I am screwed, the keyboard is useless and with no mouse I am unable to click on my user name to log in...............
my mother discovered the internet 1 year ago and now she's addicted to it and is going crazy without it! My sister unplugged her Dell PC, to move it, and for some reason the computer now isn't reading the Westell Modem for the internet. Called the ATT ISP and we figured out it wasn't the ethernet cable, instead, its the PC which just isnt reading the ethernet to get on the internet. When I did IPCONFIG the IP Address doesn't show up. This is basically what it says: c:Documents and SettingsDiana Cresswell>ipconfig.........
what i delete in the registry or some where else but the problems is that the CMD in Xp dont recognize the command net( net start, net stop etc.)stem-restore?