my product activation key doesnt work for my windows so i have no way to log on to windows, so im just going to format the harddrive, but im having truouble with getting to MSDOS to format it. and when i go it says i cant because im running programs on the hard drive,
View 9 RepliesI am going to format computer so I can do a fresh install of XP. The computer is five years old and it needs it. The XP disc that came with it didn't even have sp1. Can I use a disc that has sp2 on it if I use his original COA? or do I have to use the original, update to sp2 then update with all the patches since 2002.
View 10 Replies View RelatedI'm having a hard time formating my system. I recently got virus that was so bad i couldn't access my desktop, so i am now formating my hard drive. I go through the process of a clean install and i make the partition I hit quick ntfs and it goes on fine until it restarts the computer. All it does is it either loads up on the cd or it hangs on a - mark on a black background, and later tells me non system disk or disk error replace and strike any key when ready. I'm wondering if jumper settings may have something to do with this or if the hard drive is screwed up.
View 1 Replies View RelatedAt the mo my Win XP 120 GB drive has about 26 GB left but i have a second hard drive in my PC ( which i only connect when i wanna do some thing in Win98) which is a 70 GB drive so im thinking of using that as a second drive for my PC , i have alwas been used to formatting W98 drives etc , ie using FDISK etc but im new to doing hard drive replacments / Hard Drive add ons in XP , so my question is whats the best way to add a second hard drive to XP ? i have been told i can format the drive etc while Win XP is booted up
View 13 Replies View Relatedi just got my new computer and put it all tougther and went to formatt the hard drive and it wont formatt it just stops about 50% when u get to the formatting part and the screen gets lines throught it and turns all kinds of colors. i have a amd a64 x2 5000+ black eddtion, asus m2a-vm motherbord, with Hard Disk 160g sata.
View 2 Replies View RelatedThe harddrive is partitioned into an C: and D: configuration. However, when I try to access the D: drive, a message tells me the drive is not formatted. IT then tells me formatting will erase all data on the drive. My question is this; if I format D:, will I lose the Data already on the C: portion of the drive? I am trying to figure out if I need to backup everything on my C: drive before I format.
View 1 Replies View RelatedI have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedMy laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies View Relatedusing XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies View Relatedi have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies View RelatedWe have Windows XP Home Edition 80 GBCan we copy entire hard drive to an external hard drive?
View 36 Replies View RelatedCan anyone tell me whats the difference between a ATA hard drive and a SATA hard drive?
View 2 Replies View RelatedI recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
I want to format a laptop, but I need the Operating system, I am not sure If I have everything I need to get the Operating system back, is there any way I can purge everything from the PC but leave it ready to go again?
View 10 Replies View Relatedi'm having trouble formating my computer i pop in my boot window xp pro sp2 cd and run it and half way through... it pops up a window saying the file corrupted and it ask me to restart the computer and i tried installing windows through desktop + putting in the cd still doesn't work.my computer running SATA Harddrive was wondering if theres any other method i can do to format my OS hard drive.also anyone ever encounter a problem where they idle there computer for couple hours and it freeze ?
View 11 Replies View RelatedI am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedI can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
View 1 Replies View RelatedA problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies View Relatedi'd like to format my machine running xp pro and do a fresh install do clear all the clutter can you tell me how to go about this and of anything i need to look out for
View 3 Replies View RelatedMy Problem: My modem can not be detected. I was attempting to load AOL 9.0 optimized on my laptop and it could not detect my modem. I tried using Windows' Modem and Internet Connection and could not Detect my modem. I installed the recommended driver from IBM and Lenovo from the MDCB3C2k, thinking my modem is a 3COM modem(I have no idea what kinda modem I have. Either 3COM or Xicro, I don't know how to tell), I installed the driver and it did nothing my modem is still undetected.note: I have used Belarc Advisor, and could not get a result for my Modem Model under Communication Devices.
View 2 Replies View RelatedMy question is simple, is there a way to pick some of the files on the computer (40GB of them) and somehow back them up on the hard drive, and the format everything else.I'm using Win XP. If it helps I also have Nero 8 with Back it up but I'm not sure if that's the answer.
View 1 Replies View RelatedI have Compaq laptop which has 512 meg ram shared so technically i get 300 meg. it came with windows xp home edition. also it has 100+ programs that compaq decided to load it making it even slow.It also have backup harddrive partition and i created backup dvd's. the problem is if i reformat it using those then all the bloatware will be installed again. which i dont want.I have also got a copy of windows xp. what id like to do is format the computer using a plain windows xp cd. my question are these: would the product key on the back of the laptop work with the xp cd that i have.AND how do i backup the drivers that i would need from the laptop?
View 3 Replies View RelatedI am having trouble installing windows xp pro for a new computer. I have two WD Caviar SE16 250 GB HDD set up in a RAID 0 array. I set up the BIOS and installed the drivers and everything seemed normal. I partitioned all the disc space as one partition and chose to format using NTFS. But when formatting begins, it takes about 15 minutes to format the first 40% but it has been almost two days now and has only formatted 65%. Is this normal? I tried restarting my computer and redoing the whole process and the same thing happens.
View 2 Replies View RelatedI have a secendary harddrive I wish to reformat. It has four petitions. I tried to format it through windows xp but it wont let me, what do I do?
View 7 Replies View RelatedI am running Windows XP Professional and have been having problems for several weeks now. I got the dreaded blue screen... was on the phone with Microsoft tecs for 3 hrs one day and then 5 hrs another and they thought that they had it taken care of. They didn't do a total replace, just a repair so that I could backup some information I hadn't backed up yet. I was able to run windows XP Professional again but the tec told me that I needed to do all the updates. As soon as I updated to SP2 I got the blue screen again.
I did a repair with my cd and was able to get Windows XP Professional back up. As soon as I installed the updates and updated to SP2 and restarted I got the blue screen again.
I decided to format and reinstall instead of repair. I followed the instructions and it is now stuck on the screen where it says setup is formatting... 0%. What should I do next?
I am facing two problems with my lap top hp campac presario 2100.
1.The loptops battery to be changed. I dont know how many batteries are there. Any cmos battery there like any other pc. Pl advice. What would be the cost. and the model number . The hard disk requires replacement. I want to know the model numberor exact type of hard disk would be fit in. and the cost thereof.3. Windows xp home edition has been preloaded in the laptop. How to take a copy of the os and copy in the new hard disk. I have the serial number etc for the OS.
How to format windows xp in acer laptop which is not working right now. the window does not open?
View 1 Replies View RelatedAfter lots of installs, uninstalls, and other acquired crap after quite a few years of use, I'm planning on reformatting my computer (specs are in profile).I have a few simple questions which I hope you can answer. First, I have a single hard-drive that is split in two partitions: C: and D:. The D: has always been locked down as a "recovery" drive. Can I just reformat my computer from the D:?If not, a few years ago, I made a set of recovery disks using the recovery creator. I am unsure on this, but when I made the recovery disks, will it restore my computer to the point when I created them (hope not), or will it completely reformat everything (what I'm hoping for).I plan on doing a "destructive," clean install in order to completely reformat my computer to stock specifications.Lastly, can I upgrade straight from SP1 to SP3? Or do you recommend that I use something like Project Dakota (or RyanVM) to bring me up to spiff with SP2, then make the final jump to SP3?
View 3 Replies View Relatedhow do you see how much hard drive, C: space you have and how much you have available
View 1 Replies View Related