i just got my new computer and put it all tougther and went to formatt the hard drive and it wont formatt it just stops about 50% when u get to the formatting part and the screen gets lines throught it and turns all kinds of colors. i have a amd a64 x2 5000+ black eddtion, asus m2a-vm motherbord, with Hard Disk 160g sata.
View 2 Replies
my product activation key doesnt work for my windows so i have no way to log on to windows, so im just going to format the harddrive, but im having truouble with getting to MSDOS to format it. and when i go it says i cant because im running programs on the hard drive,
View 9 Replies View RelatedI am going to format computer so I can do a fresh install of XP. The computer is five years old and it needs it. The XP disc that came with it didn't even have sp1. Can I use a disc that has sp2 on it if I use his original COA? or do I have to use the original, update to sp2 then update with all the patches since 2002.
View 10 Replies View RelatedI'm having a hard time formating my system. I recently got virus that was so bad i couldn't access my desktop, so i am now formating my hard drive. I go through the process of a clean install and i make the partition I hit quick ntfs and it goes on fine until it restarts the computer. All it does is it either loads up on the cd or it hangs on a - mark on a black background, and later tells me non system disk or disk error replace and strike any key when ready. I'm wondering if jumper settings may have something to do with this or if the hard drive is screwed up.
View 1 Replies View RelatedIf I want to attach second hard disk with the same configuration of master hard disk, then system doesn't show second hard disk altogether or new hard disk begin to malfunction. Such as suddenly begin to give sounds like TICK, TICK TICK. Suddenly vanishes from the 'MY COMPUTER' drives. Suddenly denies to copy paste functions. BIOS shows both SATA drives. But Win XP doesn't load or simply hangs while starting up [booting up]. It happens when I attach second SATA drive with system. If only one SATA is attached, then WIN XP boots normally.
View 3 Replies View RelatedAt the mo my Win XP 120 GB drive has about 26 GB left but i have a second hard drive in my PC ( which i only connect when i wanna do some thing in Win98) which is a 70 GB drive so im thinking of using that as a second drive for my PC , i have alwas been used to formatting W98 drives etc , ie using FDISK etc but im new to doing hard drive replacments / Hard Drive add ons in XP , so my question is whats the best way to add a second hard drive to XP ? i have been told i can format the drive etc while Win XP is booted up
View 13 Replies View Relatedrecently bought SATA 3.0 hard disk(samsung)and i forgot if my motherboard support this hard disk,after checking it only supports 1.5 SATA.I visited samsung website on how to force my Hard disk to run at 1.5
View 8 Replies View RelatedI have created a Bart PE bootable XP cd. I can boot into windows using this CD I would like to know how to copy the data in my hard disk to pen drive or flash drive.
View 11 Replies View RelatedIt says that TOTAL SIZE = 39 GB And Free Space = 5 GB Which means that the size of all files on C is 34 GB But when I select all files including Hidden files and Right Click> Properties, its size of all files is only 27 GB.I did clear recycle bin and disk defragmenter C, but still the same. So why is that?
View 4 Replies View RelatedI am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedI can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
View 1 Replies View Relatedif someone could tell me how to format windows xp home edition from the bios and not using the xp disk. I have already tried right clicking on drive c and selecting format but the message says windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure that no window is displaying the contents of the drive. Then try formatting again.
So I closed all open programs that I could but still no luck. Then I tried the format from running the run command and typing format c:but I get this message format cannot run because the volume is in use by another process. Format can run if this volume is dismounted first. All open handles to this volume would then be invalid. would you like to force a dismount on this volume? (y/n) so I type y for yes and hit enter then nothing
I upgraded my server, basically all I kept was the two hard drives from the old machine. The one hard drive is for the system files (~13GB) and the other is for storage, user files, etc (~160GB). I figured that then I reinstalled Windows 2000 Server on the System disk, I would just have to assign the other disk a drive letter and be on my way. Instead, in the disk management console, I get "Disk 1 [the 160GB) Dynamic Unreadable" I can revert to a basic disk, but it says I will lose all my information. It is imperative that the data on this disk be recovered.
View 5 Replies View RelatedOkay this is driving me nuts. I know about adding a key to the registry as described
here:http://www.pcmag.com/article2/0,2817,1202672,00.asp
What it doesn't tell you is if you DO have something that says DWORD in the registry.
I'm not sure if I should add NoLowDiskSpaceChecks or not
I am facing two problems with my lap top hp campac presario 2100.
1.The loptops battery to be changed. I dont know how many batteries are there. Any cmos battery there like any other pc. Pl advice. What would be the cost. and the model number . The hard disk requires replacement. I want to know the model numberor exact type of hard disk would be fit in. and the cost thereof.3. Windows xp home edition has been preloaded in the laptop. How to take a copy of the os and copy in the new hard disk. I have the serial number etc for the OS.
I got a new system assembled a month back and after 15 days the stop error began to happen (this was after my bro tried to transfer files from his iPod & it didn't happen). I looked up a lot of forums but didn't find this one and couldn't figure out what the problem might be. Restored system, disabled services, but nothing worked. Finally I got the C: drive formatted and Win XP SP2 reinstalled. Didn't install unnecessary/extra software this time. But I found this site a day before getting it formatted, so saved the last 5 minidump files. And the day after the reinstallation, it has started happening again. The first time it was the bcmndis.sys file -- Airtel Beetel 220bx modem -- connected with the USB; couldn't find another driver for it online.
View 7 Replies View Relatedfirst things first I completly locked myself out of my own comptuer. Then I broke into my own account and created a password reset disk. Now, anyone who types in a wrong password can reset it. In other words no matter the password you enter it can open my account. I'm the only user on this computer, no guest , admin, nothing. I'm trying not to create a new account in order to correct this probelm.
View 3 Replies View Related*** STOP: 0X00000024 (0X00190203, 0X82ECA898, 0X0000102, 0X00000000) This is the blue screen i get when i disable restart on errors. For what ever reason i cannot access this Hard Drive. Bios loads properly and detects everything it needs too. Just after the bios i get a chioce window that says your computer stoped responding for what ever reason, blah blah blah. It allows me 5 choice, safemode, safemode networking, safemode cmd, last known good config and normally. If i choose any of them then immediatly hit F8 i get the rest of the options for boot up. Every choice ends the same way froim debug mode to safe mode. After you make your selection you get to the windows loading screen. About 2-3 seconds into it the computer goes into a rolling restart mode............
View 8 Replies View RelatedIn the past several weeks I have experienced a very peculiar problem with my Windows XP pro machine.All of a sudden, my icons (shortcuts) on the desktop stop functioning. I click ? nothing happens. After the first reboot it works for a while and then stops again. When that happens again, the computer doesn?t boot at all ? not even in safe mode.I boot the machine using a CD ROM - David?s Ultimate Boot CD, and then I can access the hard drives, internet etc. as if everything is OK. At this point my only recourse is to reinstall Windows, which I did.
View 2 Replies View RelatedLast week i installed windows XP Pro on my desktop. It has a 250GB hard drive which has 1 partition (C drive only), NTFS offcourse. I did not format it while installing windows as it has lots of stuff in it. There's over 50GB free and i�ve been removing a lot of stuff from the hard drive to make up some space but in windows i get an error message that i don't have enough disk space, the disk cleanup utility runs cant free up space and i can not install or copy anything in the hard drive. I've noticed that when i deleted some file holding (or not) the shift key the free size goes lower although the files are being deleted from the hard disk.
View 14 Replies View RelatedHey, have built a new pc, but am using the same hd as my old one, when booting i get a "disk boot failure insert system disk and press enter" however when i press enter it boots up, not really a big problem just annoying and i wonderd if anyone could help get rid of it.
View 4 Replies View Relatedmy dad's hard drive crashed and so he has just bought another, now he needs to reinstall Windows XP Home but unfortunately he doesnt have a disk as its an HP machine and a disc was never supplied, the operating system was already on the computer and the option of making a recovery disc was available but he never actually undertook that option So he needs to get Windown back on his computer, he has the serial sticker on the side of his machine, he rang up HP and they said the machine is not in warranty - they cant send him a replacement disc
View 2 Replies View RelatedI always have errors reported on my hard drive, even after chkdsk /f and /f/r."Freespace marked as allocated in the volume bitmap". Why does it never go away? Windows XP Pro with all of the updates. Machine runs fine.
View 6 Replies View RelatedI got infected with a browser highjacker. (and who knows what else) I ran chkdisc -- was OK. Decided to restore to a week earlier. Seemed to be Ok. But ---- when I started up I a 7B blue screen flashed on and immed turned machine off (don't even have time to read the rest of the codes or anything else on the page).
View 6 Replies View RelatedMultiple computers blue screen on him lately. the 4th BSoD-laden computer, but it's got me and the Sys Admin pretty stumped, so maybe I can find an answer here. The computer is a CSI brand with AMD Athlon XP proc & Windows XP. The problem hdd is a WD 400, and we also have another working WD 400 in another computer that I'll mention later. Both have Windows XP Pro SP2 installed and were originally in separate computers (each was the only harddrive in its comp originally.
Trying to start a computer with the problem WD 400 alone results in a blue screen error right after the windows screen (if I remember correctly...it's not long after the hdd, etc is recognized anyways), and gives the STOP error 0x00000024, and mentions some problems with the NTFS. I found that the ..24 STOP error has to do with the NTFS.sys file, but that doesn't help me much. The computer does not let me do anything after this BSoD error, and upon restart, I just get the same error, no matter which Safe/etc mode I try...it doesnt load into any of the modes.
I have just installed a new Seagate SATA 200GB hard drive (ST3200822AS) and partitioned and formatted it with Partition Magic 8.0 into 3 separate logical
partitions. The partitions have a cluster size of 8K and are under the NTFS 3.1 (Windows XP) file system.
I have just installed a new Seagate SATA 200GB hard drive (ST3200822AS) and partitioned and formatted it with Partition Magic 8.0 into 3 separate logical
partitions. The partitions have a cluster size of 8K and are under the NTFS 3.1 (Windows XP) file system.
I recently have built a new PC using parts i ordered and parts from my old system which desperately needed to be replaced. After my new system was created it ran well for about a month. When i came to turn on my PC one day i was greeted by a blue screen telling me that my windows registry files became corrupt. I used Microsoft.com's fix using the setup disk and had my PC working again. About a week later i was surfing the net and soon every program i accessed started to become corrupt. Knowing i didn't wanna mess with any log Microsoft fix i simply formatted and reinstalled windows XP on my system.
View 3 Replies View RelatedI want to downgrade the factory loaded Vista to XP pro on my Acer Aspire M5640 desktop. I found some detailed instructions on line for doing this, but I don't get very far before I get a blue screen error message while the computer is in the process of booting up from the XP disk and loading the files while in windows set-up mode. It reads as follows: "A problem has been detected and windows has been shut down to prevent damage to your computer.
"If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: "Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: STOP: 0x0000007B (0xF78D6524, 0xC0000034, 0x00000000, 0x00000000)
having my laptop returned from service I found my Bios messed with where when I would start my computer but Bios wouldn't find my hard drive or an OS I found that my system was set to RAID instead of ATA. After resetting it back to ATA it boots up fine. However I wanted to reformat and start clean.I placed my XP disk in, reset my BIOS to read my optical drive first and no problems.However every time I get to partition drive all I see is "Unknown Device" If I press any key I get a blue screen of death. Most times it's the 0X0000008E.
View 9 Replies View RelatedI want to format a laptop, but I need the Operating system, I am not sure If I have everything I need to get the Operating system back, is there any way I can purge everything from the PC but leave it ready to go again?
View 10 Replies View Related
