when I bought my Laptop,right at the beginning I dit a mistake,my keyboard was in arabic,then I could change to french/english.So in C/downloads and settings there are a vew folders,like :cookies,desktop,favorites,my documents,start menu,windows NTUSER and also a folder whiche I named by mystake at the beginning in arabig. This causes me a problem now and I want to rename it. But I can't I thing I have to do this in the register, please tell me how and what to do step by step, I am a beginner.
One of my computers is a Compaq desktop running Windows XP Home SP2. The My Documents folder is located at C:Documents and SettingsCompaq_AdministratorMy Documents. I want to rename the Compaq_Administrator folder but when I try Windows tells me that it is a Windows system folder and that it can't be renamed.The reason that I want to rename it is that I just installed Network Magic to make it a little easier for my family to navigate the home network. When I share folders, they come up with the family friendly names that I had setup for each computer along with the folders that are shared. Folders such as Documents, Music, etc. The folders that are shared by the Compaq computer come up as Compaq_Administrator Documents, etc.That computer's name and user logon are family friendly to match the theme that I have used for all of my computers. Is there some way to rename that folder even though Windows doesn't seem to want me to?
I'm trying to rename or delete a folder but there is no options for the folder.Ok the problem I am having is I can't delete or rename the folder..... 'S Documents this folder is empty. I think I used a trick on u-tube to hide the name and I cant find iThe trick. This folder shows up as a My Document folder in dos. and says acesss denied. It may be a duplicate or used in the same way. Posibly it a folder used by windows
Quote:Originally Posted by TheOutcaste Welcome to TSG!When you did the recovery, it apparently didn't rename your old User Folder (HP Administrator in this case). So when Windows was being re-installed, as a folder named HP Administrator already existed, it created a new one named HP Administrator.ComputerName.Just move the stuff you want from the old HP Administrator folder to the new HP Administrator.ComputerName folder. Mostly just move stuff from My Documents (may be called HP Administrators Documents), Favorites (Internet Explorer), Desktop (files that were on the old Desktop, best not to move shortcuts though).If you use Firefox, your old profile and bookmarks will be here:C:Documents and SettingsAdministratorApplication DataMozillaFirefoxProfiles andomname.default The profile under Administrator.ComputerName will have a different randomname.default folder, so you can't just copy the folder. You can copy the contents of this folder to your new profile folder, overwriting the current profile,
The rest of the message says "Make sure the disk is not full or write protected and that the file is not in use".In Folder:Properties, the file shows as 'Read Only'. Unticking this box followed by the option to do the same for all folders and subfolders, then using 'Apply' was unsuccessful, as when I tried to rename the folder after doing this,the message reappeared, and the folder was again 'Read only'.As Administrator, my understanding is that I have full permissions under the Security section of Properties, which appears to be the case, as all boxes are ticked.The path is as follows:- C:FOLDER:Sub folder 1Sub..1 cannot be renamed. It contains four additional folders, (each with loads of subfolders),of which 3 can be renamed, whilst the fourth one cannot, with the same "Access denied..." message appearing.
To begin with. My Hal.dl file ended up missing, so I got an error and had to reinstall windows, bla bla bla bla. i didn't lose all my data, and just reinstalled windows. I had to reinstall all my programs again, and everything went swell, untill I hit one problem. I had a ton of data (over 15 GB of pictures/music, etc) on my desktop. Since it was on my desktop, I now have my previous user folder in my documents, and I am un able to open it, delete it, rename it, etc. I know that the data is still there because when I check how much of my drive is taken up, it is obvious. (22.2 GB DOES NOT just disapear
Open Task Manager (Start - Run - taskmgr.exe) Go to processes tab and verify "msmsgs.exe" is not running. If it is click on the process and choose "End Process" Go into your Program Files folder. Rename the Messenger folder to "MessengerOFF" If you are unable to rename the folder in this manner then boot to safe mode and make the change.
To rename a group of files or folders in WinXP, open the explorer folder that contains the files and do the following: (be careful not to include any critical windows system files or folders when applying this technique. back up with system restore first if you're not sure. also, it only makes sense to apply it to files of the same type.) 1. Highlight the files and/or folders to be renamed (remember to hold down the CTRL key to select non-adjacent files); or hold CTRL-A to select all the files and folders in a given folder 2. Let the mouse hover over the file that you wish to be the first in the series
We have several printers located in various rooms and connected to various computers. I would like to rename the networked printers so that the computer they are attached to is the first part of the name. Presently, the computer is the last part of the printer's name.
As of yesterday, I am no longer able to rename subfolders within the My Documents Folder. As suggested here I have tried right-click, and F2 but no luck. Ran Ad-Aware and SpyBot and system is free of spyware. The option is not available using the File menu. I know have been able to do this in the past using the above methods because I still see the folders I have created using right-click. When I select File>New, I can add a "new folder" but I cannot rename it. Any ideas and why is this happening all of sudden?
I have a spare drive where I keep all my music. When I open that folder and right click on a song to rename or delete the folder, it just shuts down and takes me right back to desktop.Normally when you right click on a song you get all kinds of options like scan with antivirus,create shortcut,rename,delete and so on.
If you (like me) would like to be able to rename the Recycle Bin to something else (Trash, Waste, Shredder, etc) then this tweak will make it easy to do so. Now save this text file as a .reg file, such as "Rename Recycle Bin.reg" and put it wherever you like. Double click on the file, and when it asks you if you want to import it into the registry, choose Yes. You'll notice a new option in the right-click menu to Rename the Recycle Bin. You can also rename it by highlighing the Bin and hitting F2, or by highlighting it and clicking on the file name (just like renaming any other file.If you want to turn off this new feature, make another .reg file with the same content as above, but change the first number in the "Attributes"=hex: line from 50 to 40 and import that file into the registry.
For this question, I have about 7217 files that each have strange filenames. For this, how can I rename all files at once, with each file with its own random name?(Preferably a random string of numbers.) How can I do this so I don't have to manually edit each file?
I've got a very specific task in mind: I'm creating a CD full of mp3's which will play on my portable cd player. BUT: for it to 'see' the mp3s, all the file names have to be preceded by 3 digit track numbers, i.e. 001, 002, NOT 1, 2, or 01, 02.
Rather than re-label 'em all by hand, I'd like to use the rename utility. The only problem is that the rename utility doesn't 'add' the zeroes in front, it 'overlays' the zeroes over the existing label, so I get a bunch of files all numbered '00'.
See attached screen shot. The drives: E, F, G, H, are all parts of my multi-card reader. One is for MemoryStick, another is SD Cards, CompactFlash, etc. Would it be alright to rename these to something more recognizable at a glance? (for example, rename "Removable Disk (H)" to "SD Card") Or will it somehow mess up the way the drives read the cards?
Normally when you click on a folder or file in My Documents, and right click on that file or folder, you should get a list of options on what you want to do with that file/folder, including deleting it. However, I have a very stubborn file in my computer that will not delete. When I right click it, it does not give me the option to delete it. I can not remove, rename, or move the file. It won't do anything at all. Is there any way at all that I can delete or remove it
I recently installed a photo management software onto my notebook, which I also have on a pc. I have over 11,000 files that had previously been tagged on the pc, and the shortcut to them pointed to drive F. The drive they now reside on is drive D and I cannot rename the drive to F because that would cause other problems. Short of going into each shortcut and redoing the properties, does anyone know of a program I can buy/download to do this for me as a batch process?
I have xp home edition sp2 on my computer. When I right click say on an icon on my desktop or rightclick on a picture in my documents to rename or run a scan or say delete it my short cut menu does not come up and the hour glass just sits there, then if it doesnt freeze up the icons disappear then they come back and I lose most of the items in my tray next to the clock.....Dr watson post mortem debugger pops up and the error program says.....dr watson has incountered error and will be closed by windows..you will need to restart program...an error log is being created.
Another error program has come up and says.explorer.exe generated error and will be closed by windows you need to restart program..an error log is being created.I get the send a report to microsoft... but i cant as my computer is now froze. I have asked alot of ppl about this but they have no clue and its driving me crazy...my uncle said just dont right click but its something I do on a regular basis I forget and this is what happens each and every time.....I have run a scan and my virus scan and defragged
I'm trying to copy a partition of my hard drive over to an external drive so that I can format that drive and delete the partition.
I've run into a file that I cannot copy, move, rename, The file originally had the character in it, but I think sometime in one of the transfers of the file, it lost the character and it got replaced with an upside-down "T". This file was saved in different versions under the same name in two different folders and the same errors have occurred with both"
"Cannot copy file: Cannot read from the source file or disk" and in DOS:"The filename, directory name, or volume label syntax is incorrect."
I have 10 workstations on a network. We have a high turn around in employees. What I would like to do is just to rename the user profile for a new employee instead of creating a new account. I do know how to rename the user on the server. My issue is that even though I renamed the domain user account to a new user the old user name still shows on the workstation in the c: documents and settings and the new doc that are created show the old user as the author. How can I change this to show the new user?
All the .html files on mywindows XP sp2 machine have been renamed to .htm and further when I try to rename them, the explorer CPU usage suddenly increases to maximum. But, some files gets renamed and others can't be renamed at all. And, for those which cannot be renamed, I get a pop-up error message saying "file is being used by another program and cannot be renamed.", and that's when explorer starts using all of CPU and system gets very slow.I have already done full system scan through Kaspersky and Malware Bytes Anti-Malware, but they have simple turned out to be futile.
My mom gave me her older computer when she upgraded. She had taken it in for a check up and it was gone over by the geek squad. Figure that all is well, the computer is running fine but I would really like to get my name to show up instead of hers. I don't have any original disks, is there any way of making my name the primary name showing up without a big to do about it? I changed the easy ones, but I can't seem to figure out how to get her name out of the documents in the "C" drive, it keeps telling me that it's a windows system file and that it can't be removed or renamed.
I am having an issue on one PC when renaming image files (.bmp).For example I have 2 images square.bmp = image of a square circle.bmp = Image of a circle If I rename sqaure.bmp to squareTest.bmp and then rename circle.bmp to square.bmp. The thumbnail image that displays for circle.bmp will change to square. If I then change it back to circle.bmp the image will go back to be the correct circle.
Could anyone tell me how to change the name of a user account so thatthe folder in 'Documents and Settings' for that user changes also,aswell as any other system references to that user. The chimps at thecomputer store made the account name 'sihdigc', which is justridiculous. I've set everything up on this account and don't fancyhaving to make a new one, I'd just like to know how to change the username properly.
Using XP SP2 and I can not move, rename or delete any folders.For example - I create a New Folder and try to rename it - it stays as New Folder. I try to move ANY folder and it does not move - stays where it is. Even when copying contents of a USB stick - folders will not move, be renamed or deleted. I CAN however, move files and rename and delete files - just not ANY folder!I can delete the folders from the command prompt though.
I have a laptop running XP pro and whenever I try to rename, move or delete a file in explorer, DRWatson(kind soul that he is), pops up to tell me that he has encountered a problem and he needs to close. He then gives me the option to send an error report to microsoft. After sending numerous copies of these error reports to bill and not recieving anything in return, I thought it was about time I tried someone else. This is how I came upon this excellent site and after reading some of the posts, I am hopefull that there is a knowledgeable person on board who will be able to help me. The error report from DrWatson is below. If anyone can understand it and knows what the problem is, please let me know because at the moment I cannot do anything with my files or folders and it is driving me mad. The error report says:
I am trying to copy my Quicken files and it states it automatically copies them in the Windows XP's temporary CD burning folder. How do I find this folder to copy these files onto a CD or DVD.
I'm played with the folder options over and over and for some reason ever though I have clicked open folder in same window and "launch folder window in a separate process" is NOT clicked, for some reason when I double click to open a folder it still opens it with a new window. Also, under file types it won't let me edit or remove the commands for folder, drive, and file folder.
I have a problem. When I double click a folder, I am sent to the Search Results folder and the content of my folder is not displayed. To access the files from a folder I need to right-click and click on the Open command
