Trying To Hibernate System Straight To BSOD

Jul 26, 2007

I have no idea why, but when i try to hibernate, the computer goes straight to BSOD and then resets, boots windows and its as if nothing ever happened. WTF Is going on?

View 10 Replies


ADVERTISEMENT

BSOD On Load After Hibernate / Stand By

Apr 18, 2010

ALLWAYS when I load from standby/hibernate I get a BSOD with weired characters(may be because my xp is in greek). If I go to event veiwer it has a red X in system.It says: in english(translated): Code: error code 1000008e, parameter1 80000004, parameter 2 806eeae1, parameter 3 a99f265c, parameter 4 00000000.in greek

View 11 Replies View Related

When I Hibernate The System It Wont

Sep 14, 2008

when i hibernate the system, it wont hibernate. instead it says 'preparing to hibernate' it just stays their with the message. i have scanned for viruses, spyware etc.. and still i cant hibernate, and also disabled and re-enabled hibernation feature and restarted the syste.

View 9 Replies View Related

Hibernate And Standby Hang System

Mar 7, 2010

I recently installed SP3 and IE8 along with all updates. All went well except now Hibernate and Standby often kill the system including the cursor. If I boot and try Hibernate or Standby it usually works, but if I run for a while and try them they hang the system. The problem did not exist before I installed SP3 and IE8.

View 5 Replies View Related

Won't Hibernate - System Patches Are Up To Date

May 12, 2010

Intel 4 Pentium with 1.5 GB of RAM Memory Windows XP Professional with all patches up to date. HDD of 150 GB partioned into a System Area of 50 GB and Data Area of 100 GB. The System Area has 21 GB of free space.Upon selection of Hibernate, the process starts but takes about 10 minute to complete. Then the computer restarts instead of powering off at the end of the hibernation process. It does say that it is resuming windows.If you select Turn Off instead of Shift+Click over the Standby button (i.e. Hibernate), the system will power off.

View 3 Replies View Related

Laptop Wont Hibernate, And System Restore Cant Help It

Jul 31, 2010

In the last week or so, i've been unable to hibernate my computer.When i click the button to hibernate, the screen will go blue and say "Preparing to hibernate" as normal, but then it quickly flashes back to whatever i had before on the screen.
Strangely, i can still standby or shutdown the computer with no problem. And im not getting any error messages or anything about it.It just won't hibernate.So far, i've tried System restore to bring it back to an earlier date. But that didn't work.I tried restore it to another earlier date, and that failed (it wouldn't restore it. probably because there weren't any changes to be made. i don't know.)I also tried un-installing my virus software (McAfee) and then re-installing as i thought that may be the problem, but it didn't solve it.I also tried opening "Power Options" in the control panel. From there i unchecked "Enable hibernate" and restarted the computer. I then checked "Enable hibernate" and restarted again.

View 3 Replies View Related

Slipstream Straight To SP2?

Oct 10, 2005

So I have an XP home disk (better than nothing) that is pre SP1! I know.. Gay... Can I stream in XP2 without having to Stream SP1 into the disk and not have any problems?

<font color=red>"Battling Gimps and Dimbulbs HERE at THGC"</font color=red>

"<font color=blue> Wusy</font color=blue> <-Professional sheep banger"

View 1 Replies View Related

Straight To Homepage?

Mar 12, 2008

Every time I log on my web browser takes me to my hme page although it is set at 'About Blank' When I close this down it asks me if I want to disconnect. How can I stop this happening? Also, I am about to change from dial up (yep a bit slow) to broadband. Is it best to remove my old dial up programme? It also came with basic Norton security but I looked in Add/Remove progs to uninstall but can't find it anywhere?

View 10 Replies View Related

Try To Hibernate My Computer / Insufficient System Resources To Complete API

May 10, 2007

I know that this question has been asked but I could not find an answer that fixed the problem, so I thought I might try again. Whenever I try to hibernate my computer, the message, "Insufficient system resources to complete the API." comes up. Afterwards, anything concerning hibernation disappear and the hibernation button cannot be clicked. My system details are as follows: Dell Inspiron 9300 running Windows XP Media Center Edition. 1.73 ghz processor with 1.50 gb of ram. (I have heard that having over 1.0 gb of ram might cause this, but I could not find anything that could fix it.)

View 6 Replies View Related

System Unable To Hibernate / Power Settings Wont Work?

Feb 20, 2005

Running WinXP Pro SP2 on an Intel D865GBFL motherboard with Celeron processor and ZoneAlarm Security Suite. DSL broadband via DI-524 router with MAC filtering.The Power settings to trigger hibernation after 2 hours were initially working but are no longer effective. I've tried negating hibernation, rebooting, re-establishing hibernation, etc. to no avail.

View 4 Replies View Related

Show My Icons In Straight Line

Sep 14, 2007

i want to show my icons(mu computer, recyle bin,etc) in start line (as icon appear in Nokia N70)

How can i show them in straight line

View 5 Replies View Related

Messenger 8.5 Table Comes Up On The Screen Straight Away

Nov 13, 2007

When I start up my PC, the messenger table comes up on the screen straight away and blots out my normal homepage. I have noticed that the little messenger icon is at the bottom righ hand side of the screen in the start up section.Does any one know how to get rid of this. I want to keep messenger but I do not want it coming up on my screen every time I start the PC.

View 3 Replies View Related

Straight From Start Screen - Password

Jan 15, 2009

Apologies in advance for this being in the wrong place, etc. I'm just a little stuck, and not the most savvy person with computers.So, I have this laptop - Windows XP. Maybe a year old. Never had any problems with it before. But about two days ago, I turned it on and it just started repeating the letter 'j'. With irregular pauses. Even if there wasn't any programs running - straight from the start screen, when I went to type in my password - j. jjj. jjjjjjjjjjjjjjjjjj. Though, y'know, it was just a series of dots, since it was in the password box. But.they were 'j's. It doesn't seem to matter whether there is actually anything like Word open, either. After getting rather annoyed at the computer, and button-mashing the entire keyboard, it stopped repeating 'j' and started on '`'. Not... not actually better.

View 14 Replies View Related

After Logging On To Comp Logs Me Off Straight Away

Jun 3, 2007

when i log on to my laptop it begins to load up my desktop and it only gets as far as the wallpaper then it immediately logs me off again. so i cant get into my comp to try and fix it.

View 14 Replies View Related

Start The Pc - Safe Mode - Straight To A Black Screen

Jan 9, 2009

i had a computer which had a pretty bad visus on it. i think i got the virus out but now it wont start.I tried to do a repair of windows with what i thought was the disc for the pc, turns out it was a different xp version than the one on the pc.
So how i have the original corrupted windows, and the repair version of xp on the machine. Both of which will not even run.Its really important that i get the data of the pc, that was the whole point of what i am doing. the computer starts, then said it didnt load, i choose how i want to start the pc, safe mode...etc and then it freezes.Sometimes it just goes straight to a black screen, and i can no longer get it to boot from the windows disc.

View 5 Replies View Related

Computer Skips Bios (Black Screen) Then Goes Straight To Windows Loading Bar?

Aug 22, 2010

as above, pentium 4 windoiws xp black screen on startup cannot see bios menu or get to safe mode.

View 3 Replies View Related

System Get BSOD And Restart

Feb 26, 2008

Whenever I start up my computer, right after the windows xp display, my toshiba laptop gets the bsod and restarts, repeating the process over and over again. I can't go into safe mode or anything, it'll just do the same thing again. I've written the error code and it is 0x000000ED (0x84340E30, 0xC0000006, 0x00000000, 0x00000000) the problem is that i don't have my recovery disks or anything like that when i got it, but I do have this boot cd called ultimate boot cd which i got from timatebootcd.com, this will allow me to wipe out my hard drive but im just unsure if that will fix the problem.

View 7 Replies View Related

System Haults In BSOD?

Oct 6, 2006

It all started when a friend gave me a 4 port USB Hub come clock and cup warmer!!! which I plugged into my pc. I plugged my printer into it, when I switched off the printer the system crashed to a BSOD. On reboot, as I remember, it came up with a splash screen I have never seen before (ASUS I think) then a BIOS set up page! I left the settings as they were and clicked ok, I think it was set to 700mhz. Since then it has been going to BSOD every time I switch off, or when I play Tiger Woods 2006 and go to save or move on to the next level of the game. It recently rebooted with the BIOS set up again which I changed to 933mhz hoping it was just that causing the problem!! Also when it reboots I get the voice telling me it has gone thru POST and booting from operating system. I have recorded stop errors from the last two crashes if it helps.
STOP 0X0000008E (0XC0000005, 0X BAE2CEED, 0XB75229DC, 0X00000000) VS DATANT.SYS ADDRESS BAE2CEED BASE AT BAE05000 DATESTAMP 44ED374A
STOP 0X00000050 (0XADBCB8C2, 0X00000001, 0XBF9E059B, 0X00000000) ati2dvag.dll ADDRESS BF9E059B BASE AT BF9D4000 DATESTAMP 43fbdea6
It has just crashed again on reboot, Windows started OK then when I clicked on the Avast anti virus update notice it went off....

View 14 Replies View Related

At Wits End BSOD P17- System Portcols

Sep 6, 2006

My system as it stands now: Athlon64 754 3000+/AsusK8VSE Del/1Gig Geil DDR/Geforce 6800GT256MB/Soundblaster Audigy/Antec NeoHE 430/Fusion HDTV card/Seagate 120GigIDE/Western Digital 250Gig SATA/LG 4120B 12x DVD-RW DLfor 6months + now I've been getting BSOD errors at random times. At first this was mainly occuring with 3D games (Oblivion, HL2 etc) and nv4_disp.sys etc and sometimes portcls.sys, but then it started happening more often and usually D1 with portcls.sys. (was using onboard sound at time) A few times while I was in the desktop (no 3D/graphics intense stuff going)

View 2 Replies View Related

HJT Log - Bsod - Find Operating System

Jan 1, 2006

I am sure you will need a HJT log but can't remember how to get one. This computer has been starting up fine but if i walk away I comp back to :1962 no operating system found. Press f1 to repeat boot sequence and when I do that I get a weird graph and more errors. I don;t know where to start. If you advise how to get a log maybe that's where I should begin.

View 11 Replies View Related

Booting Operating System - Bsod

Mar 8, 2006

After Booting XP I get the blue screen with this message C0000221 {Bad image checksum} The image msvcrt.dll is possibly corrupt.The header checksum does not match the computed checksum

View 2 Replies View Related

New System Build - BSOD Appears And It Restarts

Sep 15, 2007

I have a optical disk from my old build and 1 ide hard disk with xp installed.

I have tried booting from the ide hard disk with xp installed but when the xp loading splash screen is about to come a BSOD appears and it restarts. I can't read the BSOD as it goes to fast and i can't stop it.

Used the hard disk back with my old system and there is no problems, everything runs fine.

I have tried using 1 ram stick, both sticks, ram in different slot, every configuration i could think of. But i still have the problem. Tried the ram on a different system and it is fine. i can't get to run xp on this new system.

View 6 Replies View Related

BSOD - Reboots System - Replaced Computer Cpu

Jul 12, 2005

Ive been getting a Windows XP Pro BSOD with the following technical information:
STOP: 0x0000007E (0xC0000005, 0xF495FED The computer resets before any more information is displayed.This error has been occurring for a few months, but it occurs occasionally, i usually just let the comp reboot and choose "Start Windows Normally" and it will boot fine. However, today i did that over 10 times and it kept giving me the bsod. Then i gave up, but tried again after 15 mins or so, it booted up.I only started getting the error after i replaced my comp's PSU (the old one died - i tested the old one on another comp) a few months ago. At the same time I decided to replace my graphics card (Leadtek Winfast A6600GT TDH replacing a Radeon 9200SE), and install a new sound card (SB Audigy 2 Value) and new hdd (Western Digital SATA 200G

View 2 Replies View Related

BSOD Erros And System Restore Not Working

May 7, 2006

First of all, System Restore never works. Ever. Not a single time in the 2+ years I have had this machine. I have it set to automatically make restore points, but when I try to restore to them it just tells me that it was incomplete and no changes have been made to my system. Then, recently (in the past few days), I've been getting BSOD's with errors of either win32k.sys (0x08E) or NDIS.sys (0x0DI, DRIVER_IRQ_NOT_LESS_OR_EQUAL). Microsoft Crash Analysis has twice told me it was a RAM issue, and twice told me it's a driver issue.

View 14 Replies View Related

BSOD - System Process Terminated Unexpectedly

Apr 2, 2010

For example, today when I started the computer it kept shutting off and wouldnt stay on longer than 2 seconds. Then eventually it stayed on, but has crashed several more times since then. Some other things:-Recently my Dvd drive has been disapearing off and on lately (it's showing at the moment, though). -Also my windows updates have been failing lately as well. Even though the BSODs were occuring way before that, it's still odd.

View 8 Replies View Related

BSoD - Sudenly Freeze System - Logo Screen

Feb 8, 2006

I have the problem with the bsod error (0x00000007F or something). I can't get the other specific details because I can't catch the numbers fast enough before my comp restarts. I even checked off the automatic restart button too! Usually, the system crashes randomly, when I have alot of programs on, or when im playing counter strike in particu I almost forget, it started just recently when my comp suddenly froze (except the mouse). So I restarted it but my system wouldnt boot past the logo screen. I've did almost everything people suggested but I just gave up and decided to start up new. Bad idea. So now I got everything installed. I am almost sure that it has nothing to do with software because it worked with the same things before (Even though my audio driver didnt pass the XP certification thing, which is odd).

View 12 Replies View Related

Bsod - Reinstall Formatt Drive - Norton System

Sep 25, 2006

Receiving the following on boot up: PROCESS1_INITIALIZATION_FAILED All searches indicate GoBack by Roxio or Norton. Neither installed - Do not want to reinstall or format drive.

View 1 Replies View Related

BSOD Upon Logon - Browsing Internet - System Locked Up

Dec 23, 2008

I’m having problems with my laptop, which started today. Whilst browsing the internet the system locked up, leaving me with no alternative than to hold down the power button until the system turned off. When I turned the computer back on it froze shortly after logging on, before going to a blue screen saying,

‘A problem has been detected and Windows has been shut down to prevent damage to your computer

Technical information:
*** STOP: 0x0000008E (0xc00000005, 0xEE1A8B3A, 0xF70E97E8, 0x00000000)
Beginning dump of physical memory
Dumping physical memory to disk: xx’

I’ve booted Windows several times and the hex addresses all stay the same. I’m thinking it might be useful to upload the memory dumps, but don’t know how to do this. I have made several small attempts to repair the system. Firstly I started the computer in safe mode and scanned the hard drive using AVG Free, which (surprisingly) found several Trojans and other viruses. This made no difference when starting the computer, so I pressed F8 again when Windows was starting and chose ‘Last Known Good Configuration’ which again made no difference. Finally I started the computer in ‘Safe mode with Command Prompt’ and ran ‘chkdsk’ which found no errors...........

View 9 Replies View Related

Entering Password Takes Me Straight To Log-off And Password Re-entry

Apr 3, 2009

I was doing a clean up with Ccleaner etc and in my haste I did not take note of what I was clicking. Spybot Search and Destroy flashed up and I clicked to allow, or not allow as the case may be, to do something to, from what I can remember, 'WLON' or something similarly named. In any case, what happens now is that I fire up the computer, enter my password, the desktop briefly flashes up for a split second(no icons) and then it immediately logs off and goes to password entry again.

View 4 Replies View Related

Stand By And Hibernate Gone

Feb 23, 2006

I've installed my e-GeForce MX 4000 64mb video card and enabled dual-monitors i no longer have the standby option. When i go to start-turn off computer the standby option is shaded and i can't click it.

View 5 Replies View Related

Will Not Go Into Standby Or Hibernate

Sep 5, 2005

I have re-installed windows XP home using the OEM Key on my laptop. Prior to the re-install, it would allow me to put the computer onto hibernate or standby, now post re-install, I cannot put the machine into standy by.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved