Bought a new barebones PC and want to transfer my old hard disk with XP pro on it to the new machine.Back in the good old / bad old days of Win98 etc, it was easy to do this as Windows saw IDE as IDE and made no other requests to the system to fine tune, AFAIR.Now though if I transfer the drive I get a reboot, safe mode does the same.I can furnish more info from the boot log if required later but does anyone have a sure fire way of getting the GUI up and running so that it can start updating drivers etc.I'm also transferring the cdrom, dvdrw and most importantly the AGP graphics card so it's not an issue with that
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
i recently installed WIndows XP on a very very small hard drive (2 gb) and i have one used for data as slave that is 80gb. The reason i didn't install xp on the big one was becuase i already had a lot of important data on there that i couldn't lose, and i didn't want to risk it. But now i'm running into issues of space on the small hard drive and i need a way to transfer XP to the larger hard drive without risking loss of all my data.
My computer came pre-installed with windows xp, so I didnt recieve a disk with xp on it. I am buying a new hard drive and want to install xp on it. Is there anyway to transfer xp from my old hard drive to my new one without buying a new copy of xp, and if there is, will I still be able to connect to windows update?
I have an old Hard drive with Windows XP. It came from a HP pavilion 1. Can I install it into a older Gateway or a eMachine. 2. I am the original owner and I would like to keep XP but in another machine it this possible and will I have any problems from Microsoft's "Genuine Check"
I am having a problem understanding when I load windows xp pro.before I did it without no problems,what I mean by that is my hard drives.I have two of them both are 500gb.one I had for avid editing and the c drive for other stuff like software.I guess I just got lucky before.I had both of them 500gb.but what I need to know please remember I am not a genius
I have transferred a Hard Drive into another computer and thought I had to re-install Windows (XP Home) - this I did.In so doing I created another Folder - Windows2 so as not to overwrite anything. I have a Windows folder as well.I also still have a Windows98 Folder on this drive.I cannot access the latest e-mails in the new configuration - or anything else for that matter and know that I am going to have to reinstall all programs.How and where do I find those missing e-mails, or can I uninstall this new version and revert to the old one?
I am new to this site and I come here today to ask a question, perhaps someone here will be able to offer a bit of advice.I have a toshiba laptop, running xp pro sp2, 80GB hard drive.Hard drive inoperable due to bad sectors. My hard drive was partitioned into several sections with the C: section containing the os and the D: section containing my data. I could not boot my system so I tried reinstalling os on C: section again, it required a format. I formatted the C: section and then attempted to reinstall os, no luck!Using a third party diagnostic CD I see that my data on the D: partition is still available and intact. The diagnostic disk creates a makeshift os which allows for very limited manipulation of information on hard drive. Since I can not install os onto bad hard drive section C how can I transfer data from the section D: partition to either a new hard drive or to a storage medium?
I want to transfer the local settings (bookmarks, computer display, saved email folders) to my new hard drive. Which folders do I need to transfer over to recreate the look and have access to all my stored messages/folders in Outlook Express?
I did MS Outlook 2003 full backup to an external hard drive just before my computer died and I want to transfer my e-mail files from the external hard drive to my laptop circa 2006.
I was wondering if there was a way to transfer the Program Files folder to the second disk withouth messing up the start path of those programs, and still be able to access them in the Start menu.
I am after help in that i would like to take hard drive, volume 27g from one laptop win xp pro, and place on another laptop 80g win xp home.I do have memory flash but only 256mb.I also think i will need to look at partioning drives do hope i get a reply/plural great support
I have an interesting problem that shouldn't be too hard for you guys.I have three external hard-disks connected through a USB-HUB with my WinXP computer.Never had any problems whatsoever. The other day (that is, today) one of the disks didn't show up in 'My Computer'.So I did a right-click on my-computer-->manage-->disk management, like we all would do if a disk doesn't show up.The bar was there but it sayd 'Unallocated' or something like that if I recall.Basicly, it didn't have a drive letter assigned to it wich is pretty weird. Through some magic (that I don't quite remember), I got a drive letter assigned to it.It shows up in 'My Computer', so problem solved is what I thought Not even close.
I have two computers running WinXP; the others run Win2K. When I attempt to see the file system in Explorer of one of the WinXP machines by clicking on "Computers Near Me"/Computer Name, it takes about a minute for the list of logical hard disks to appear. This is true no matter which of the other computers this one is accessed from. No other computer behaves like this. When I click on another computer name in Explorer, the list of hard disks appears almost instantaneously. Moreover, only one installation of WinXP behaves like this -- the one with a clean install of WinXP; the WinXP installation that is an upgrade of Win2K displays its logical hard disks very quickly. Once the list of logical disks appears, clicking on one entry produces a list of the folders in the root directory almost instantaneously.
Im intrested in purchasing a product to clone hard disks in Windows but I have a question before hand If I clone a hard disk into some DVD´s and the I want to restore that image into another hard disk, a new, different size/brand hard disk. Is that possible? Is there a "correct" way to do it? Someone reccomendme either Norton Ghost or Acronis True Image, but Im not sure if itll help me. I hope your answers help me to decide weather to buy the software.
my desk top is using xp and i cant access it i have tried all sorts of things boot disks, recovery disks but still no joy, tell me to format then i can start again,
My comp has died and I am rebuilding a new one, I was curious if there are any major issues of transferring the old hd with the os to the new comp with the exception of changing out the drivers? I don't want to install XP all over again, add all the updates and then install all my programs and games.
Just about to take delivery of new super dooper desktop with XP pro already installed.I will immediately network to my oldish, also XP Pro machine, and of course would love to simply copy all the junk on my boot drive without reinstalling loads and loads of software, finding the keys and passwords (all legit) and upgrading updates and indeed updates to updates! When I only had a 12gb boot drive before and now will have much more than 160gb available, transferring a bit of redundancy, (tho' I know not ideal), would be worth the days of headaches and thumb twiddling.
An XP home edition CD came with my computer. I know use a different OS, but a friend of mine is using *groan* windows 98 SE and is having lots of problem.I want to give him my CD but don't want microsoft breathing down his neck, asking him where it came from, and such. What would I need to do prior to giving him the CD and installing it on his computer to prevent the above from happening?
I installed XP Pro on an old machine for my in-laws (about a year ago). I have now purchased them a new computer, but it came w/ XP Home. I would like to upgrade the new machine from Home to Pro. I will be removing XP Pro from the old machine & reformatting the hard drive. The MS site indicates this is possible, but doesn't mention anything about licensing restrictions or activation. I tried to find the licensing agreement to see what it said about transfer a license to another computer but couldn't find it. I'm also curious how the activation process will go... Will I be able to just do the online activation or will I need to do the phone activation since I'm transferring a license.
A friend of mine has recently bought a new computer with Windows XP Home. Her old computer is a Window 98. She wants to transfer some files from her old one to the new one. I know that the Windows XP has a Files and Settings Transfer Wizard, but though I've done a search for that on the Microsoft site, I've not found any real information about the process. It does mention how to use floppies or other removable storage, but can this be done with USB cable, or something? If so, how would I hook it up? Will I see an option to choose to use a USB cable for the transfer in the Wizard? From the information I found, it does not even mention using a USB, but I find it hard to believe that one could NOT.
I recently bought a new Dell XPS and want to transfer some files from my old computer but don't want everything. One computer (Gateway) uses Windows XP Home and the other (Dell) uses Windows XP Media. Is there a way to do this without having to pay someone?
For some reason they have not included these very usefull gems, the Setup Disks for Windows XP, for all those that cannot boot from a CD for some reason.XP uses 6 floppies and there is a version for XP Pro and one for Home Edition. You need the right set for your version. The makeboot and files forthe floppies are not on the XP CD.
I have a sony vaio pcv-rx550 desktop that had a corrupt hard drive.It would not let me do a system recovery or system restore, so I wiped the hard drive with dariks boot and nuke,and ordered a new set of restore disks for my specific brand and model, but when i put the first disk in-it says ERROR: this recovery cd is not for your computer.I checked the dir. using a win98 setup disk and there is a sony folder and a image folder but I do not know the correct command to get them to load that way. any help would be appreciated.Can I use a regular win xp home disk to get it up and running and then use the disks to load the remaing software that came with it off of the restore disks?It had win xp home on it to begin with.
Here's a toughie to crack 2 hard drives, both sata, 120 GB Seagate and 250 GB Maxtor
hooked up to a Asus P4P800SE board with p4 2.53 ghz cpu and 1024 mb of DDR333 ram Windows XP Pro SP2
now.... on a fresh windows install when i copy a file from one drive to the other it goes fast (700 meg file in under 30 seconds)... then I install all my basic software (office, winamp, visual studio, nod32, device drivers for manufacturers website) and following that eventually my performance drops through the floor... it takes like 7 minutes to copy the above mentioned 700 meg file and while at it the CPU usage is high. Process explorer (sysinternals) says that most of that cpu power is taken up by hardware interrupts and I cant do much else when its copying. If i boot with WinPE those files transfer good again... 30 seconds for 700 megs.
SO this is a software problem and what i've done already is 1. disabled my startups 2. double checked that my drives are DMA enabled 3. switched back to standard IDE drivers for the controller (made no difference so i reinstalled the Intel chipset drivers again) 4. defragged the drive
and i'm out of ideas on what else I could try... if anyone has any ideas i'd be greatful. there is no viri/spyware on this machine. its been scanned left right and center
is it generally possible to transfer the files of a program installed on one system to another (i.e. I don't the install software to hand and am hoping perhaps a simple transfer of files will have positive results). I know my way around windows but not the more technical aspects of software.
I am currently running Fat32 and as noted in a previous post I am building a new computer. I have copied some files on to cds. What I would like to know (if someone has done this) is that can these files be transfered to the new build as I plan on going NTFS. Will they convert from fat32 to NTFS when copied from the disc or even work at all? Or just out of luck and have to start all over?
I'm having a little problem with my USB ports. I know they are USB 2.0 but are recognized as 1.0. Everytime I plug something in, it says "this device can run faster if connected to a 2.0 port" or something like that. Is there anyway to fix this, cause im transferring data very slowly and its very annoying. I tried to update the driver but it said there is no better or newer driver available.
Does anyone know how I can transfer my files from my desktop computer to my laptop without having to take the long way around by making a million CDs? My desktop seems to be on its last leg with all the error messages and since it won't let me download any upgrades without the oriignal disc, which I cannot find, it has not been been updated in a while. So, I want to move everything over to my laptop.
