I am currently running Fat32 and as noted in a previous post I am building a new computer. I have copied some files on to cds. What I would like to know (if someone has done this) is that can these files be transfered to the new build as I plan on going NTFS. Will they convert from fat32 to NTFS when copied from the disc or even work at all? Or just out of luck and have to start all over?
View 3 Replies
I have 2 internal HDDs, and 3 external HDDs. However, the recent addition of a Mac by my sister has forced me to be able to share the external HDDs between computers. I understand that the Mac OSX reads/not writes NTFS but will read/write FAT32. Having been advised by other senior Windows users many years back, all my HDDs are in NTFS. I have found no solution to convert NTFS back to FAT32. Does anyone know if you can do so; without damage/corruption? There is much family pictures, common music in these external HDDs; so needless to say, they are precious
View 7 Replies View Relatedis there any advantage of converting my filesystem from FAT to NTFS?will it cause and problem to the existing data on my drive if i convert to NTFS from FAT?or if i convert back to FAT from NTFS if i dont like it??i want to convert drive e: to NTFS.but since i use both ME and Xp.once i convert to NTFS..i wont be able to access drive e: thru Win ME rite?
View 14 Replies View RelatedHaving read the article found here...http//aumha.org/win5/a/ntfscvt.php I made the bootable floppy ( I hope) with BOOTITNG.EXE as suggested. The article then says I should boot this floppy...this is where I am stuck. I am a little hesitant as to how I can do this. I don't want to mess this up. The remainder of the instructions in this article seem so simple once I get past the 'boot this floppy' part.
View 11 Replies View RelatedBeen trying to reformat my harddrive, format goes well but it will only format it to the fat32 and i want it in the ntfs. now i have tried to convert using the cmd command butit tell me it will convert then restart and for a few seconds it will tell me that it is going to convert may take a few minutes then a few seconds later windows will start and its not converted over. i have the windows xp service pk 2 upgrade cd i tried using that but it never gives me a choice on wwhich file system to use. i know the option is there thou because i installed xp on my mother's as an upgrade from win me and it ask me if i wanted to convert.
I am using Win2000 on both my business laptop and my home desktop. On the desktop, because I loaded Win2000, I chose to use NTFS ... I was told that works better with a home network. The laptop came loaded and is using FAT32.Is there a benefit to switching the laptop over to NTFS and can it be done without losing all my files and being a hassle?
View 7 Replies View RelatedI'm running XP Pro; recently acquired a new LaCie 500Gb ext. HD and trying to convert the thing from FAT to NTFS.Keep getting message"Incorrect Volume Label"
View 5 Replies View RelatedI started the process of conversion to NTFS from FAT32 and I got a response that included: This conversion will also remove your previous operating system backup. Then: Convert may run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID (their caps). Would you like to force a dismount on this volume? What are opened handles? What happens when they are invalid?
And how do I find my backup(s)? I have a folder on my desktop Created Oct.29, 2006 that is faded and labeled _RESTORE. Properties shows that it is 1.21GB and has 951 files that are marked Read-only and Hidden but when I open the folder it shows only 4 files of 64KB dated 2002 and 2004. Is that folder related to backups?I want to create a current backup or restore point but I have only 5.15GB left free. Help, please.
laptop comes with win xp home, and is formatted in fat32. also has a partition right down the middle of the HD. How would I remove the partition and convert to ntfs? will i lose any of the information or files if i do this?
View 4 Replies View Relatedhow can I convert my hard drive from fat 32 format to ntfs? without losing everything preferably
View 4 Replies View RelatedAny strong views on the advisability of converting a FAT32 drive to NTFS, after upgrading from Win98se to WinXP Pro? And perhaps a word on the best and safest method to use if implementing this
View 3 Replies View Relatedi used to have win98se before and then i upgraded to winxp pro but fat32 was still there. i used fat32 for quite a while but then i had to use ntfs due to file size limits (2gb) and so i needed to convert fat32 to ntfs. i did that using convert command from cmd prompt. it didnt do it from windows, it said it needs to restart and then do it, so it did thatafter the first reboot windows didn't load up, instead i just got no signal error on my monitor. i tried turning on/off the system but this time not even the boot up details showed up - i just got "no signal" error straight from the restart.
View 7 Replies View RelatedI've heard that when burning DVD ISO files to you HD, you need to have NTFS file system, is this true?I bought a new laptop running XP and it has FAT32 file structure. Is there any what to convert this to NTFS without loosing information and reformatting?
View 14 Replies View RelatedHow to convert a NTFS file system to FAT32
View 14 Replies View RelatedI would like to convert my external hard drive to NTFS, can anyone give me some easy to follow instructions?
View 3 Replies View RelatedTo convert your drive or partition from fat32 to ntfs, type the following at Start Run (assuming it's drive c:): CONVERT C: /FS:NTFS. If you are asked if you want to dismount the drive, you must answer yes. Alternatively, you can use a utility such as Partition Magic.
View 9 Replies View Relatedi have an IDE 200 gb HD and 185gb of i think is used there is 43000 files on it i started the conversion using partition magic and it started DOS to do the coversion and now its stuck at the point where is says coverting file system: thats was 30 hours ago and its still the same.the pc didnt freez the curesr in the DOS window is blinking and when i open task manager it says the DOS is running but but there is no CPU usage in task manager for DOS or partition magici cant access MY_Computer too
View 9 Replies View RelatedWith W98/W95B you could easily use a tool to convert FAT16 to FAT32 from within windows and not lose the data (most of the time anyhow) that was on that drive/partition.Is there any tool to convert FAT32 to NTFS without wiping (formatting) the drive/partition? I haven't been able to locate any tools to do this with and so far have been moving/copying the data I want to save on a partition to another partition and then right clicking the partition I want to convert and choosing FORMAT to NTFS instead.
View 6 Replies View RelatedI've acquired an older Dell computer with the FAT 32 file system. I want to convert it to NTFS. I've found many articles with directions on how to do this but I'm having a real problem. After I go to Command Prompt and enter "convert c: /fs:ntfs, and hit enter, it tells me to enter the "volume label for the drive".I've tried many different combo's but always get the notice that I have "entered an incorrect volume label".
View 2 Replies View RelatedI have an EXTERNAL HD. I formatted it in FAT a few months ago. Ever since then, my laptop PC was unable to recognize the unit, but the Mac (which is not working right now, unfortunately) never had a problem with it. When I connect it to my laptop PC via USB, the USB icon shows up and the "USB Mass Storage Device Properties" says the "device is working properly." But the folder doesn't show up in My Computer, and diskmgmt.msc says the device is "Unallocated." Hopefully that doesn't mean the unit crashed because I have some stuff on there.Without losing the data (that should be on it, unless it crashed), I want to convert this thing to NTFS. I did some Google searching, but the instructions on how to do this (they say use convert.exe) aren't working. Moreover, no one mentioned how to convert an External, secondary HD.
View 11 Replies View RelatedI recently bought a new Dell XPS and want to transfer some files from my old computer but don't want everything. One computer (Gateway) uses Windows XP Home and the other (Dell) uses Windows XP Media. Is there a way to do this without having to pay someone?
View 4 Replies View RelatedHere's a toughie to crack
2 hard drives, both sata, 120 GB Seagate and 250 GB Maxtor
hooked up to a Asus P4P800SE board with p4 2.53 ghz cpu and 1024 mb of DDR333 ram Windows XP Pro SP2
now.... on a fresh windows install when i copy a file from one drive to the other it goes fast (700 meg file in under 30 seconds)... then I install all my basic software (office, winamp, visual studio, nod32, device drivers for manufacturers website) and following that eventually my performance drops through the floor... it takes like 7 minutes to copy the above mentioned 700 meg file and while at it the CPU usage is high. Process explorer (sysinternals) says that most of that cpu power is taken up by hardware interrupts and I cant do much else when its copying. If i boot with WinPE those files transfer good again... 30 seconds for 700 megs.
SO this is a software problem and what i've done already is
1. disabled my startups
2. double checked that my drives are DMA enabled
3. switched back to standard IDE drivers for the controller (made no difference so i reinstalled the Intel chipset drivers again)
4. defragged the drive
and i'm out of ideas on what else I could try... if anyone has any ideas i'd be greatful. there is no viri/spyware on this machine. its been scanned left right and center
Does anyone know how I can transfer my files from my desktop computer to my laptop without having to take the long way around by making a million CDs? My desktop seems to be on its last leg with all the error messages and since it won't let me download any upgrades without the oriignal disc, which I cannot find, it has not been been updated in a while. So, I want to move everything over to my laptop.
View 11 Replies View RelatedI'm quite new to computers so this may seem like a silly question, but I thought I'd ask anyway...I'm due to buy a new computer, but I have many MP3 music/video files on my old one and want to transfer them to the new one. The thing is I don't want to do it my connecting the two PC's ( with a wire/cabel etc.), so I was wondering if there's any other way of doing it?? Could I use a disc for instance (floppy disc??)
View 6 Replies View Relatedi know this is the software section but it is becasue i also want to ask this question. what software do i use to convert any movie file format to dvd format which can also be use on a dvd player?
View 11 Replies View RelatedI wanted to transfer all my files from one box to another, so I rammed in the gateway hard drive, copied all files in the root of the drive, and pasted it into a folder on my New desktop.When the file transfer finished, the folder (on the New desktop) disappeared... Funny. So, I checked the hidden files in explorer. Not there...Well, I used the command prompt. Not there either. After a while, I forgot about it, and just recently got a new defrag program (SmartDefrag).
View 3 Replies View RelatedI have a usb 2.0 Vantec NexStar 3 external hard drive enclosure, it is packed with a Western Digital 80gig hard drive. After about 10 minutes of continuous use it will go unreconized by my computer and i have to restart the external drive in order for my computer to see it again. Is this a hardware failure in the enclosure or is it my computer? Now, if there is on and off use (like listening to mp3's or videos) it will go a lot longer time before it quits on me.
View 9 Replies View RelatedHow can I transfer files between two computers using an ethernet cable, as one computer is on a wireless network?
I did MS Outlook 2003 full backup to an external hard drive just before my computer died and I want to transfer my e-mail files from the external hard drive to my laptop circa 2006.
View 2 Replies View RelatedI was wondering if there was a way to transfer the Program Files folder to the second disk withouth messing up the start path of those programs, and still be able to access them in the Start menu.
View 4 Replies View RelatedI have a really old computer; not to sure what the system specs are like other than it being made by Tiny and having a 4 GB HDD. My mum wants to use the word processor now and then but the printer has broken and she would rather not buy another; partly because drivers may be an issue and partly becuase I have unused retail copies of Windows ME and 2000 that a couple of mates donated and can print off at my Dad's house.The issue with 98 is that I want to be using USB sticks when necessary to transfer word documents over to my Dad's computer running XP to print but 98 does not have the necessary drivers and I think it is impossible to get any; from what I understand that what 98 SE was for.
View 14 Replies View Related
