Converting From FAT 32 To NTFS: Finding The Backups?
Apr 8, 2007
I started the process of conversion to NTFS from FAT32 and I got a response that included: This conversion will also remove your previous operating system backup. Then: Convert may run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID (their caps). Would you like to force a dismount on this volume? What are opened handles? What happens when they are invalid?
And how do I find my backup(s)? I have a folder on my desktop Created Oct.29, 2006 that is faded and labeled _RESTORE. Properties shows that it is 1.21GB and has 951 files that are marked Read-only and Hidden but when I open the folder it shows only 4 files of 64KB dated 2002 and 2004. Is that folder related to backups?I want to create a current backup or restore point but I have only 5.15GB left free. Help, please.
I have 2 internal HDDs, and 3 external HDDs. However, the recent addition of a Mac by my sister has forced me to be able to share the external HDDs between computers. I understand that the Mac OSX reads/not writes NTFS but will read/write FAT32. Having been advised by other senior Windows users many years back, all my HDDs are in NTFS. I have found no solution to convert NTFS back to FAT32. Does anyone know if you can do so; without damage/corruption? There is much family pictures, common music in these external HDDs; so needless to say, they are precious
is there any advantage of converting my filesystem from FAT to NTFS?will it cause and problem to the existing data on my drive if i convert to NTFS from FAT?or if i convert back to FAT from NTFS if i dont like it??i want to convert drive e: to NTFS.but since i use both ME and Xp.once i convert to NTFS..i wont be able to access drive e: thru Win ME rite?
Having read the article found here...http//aumha.org/win5/a/ntfscvt.php I made the bootable floppy ( I hope) with BOOTITNG.EXE as suggested. The article then says I should boot this floppy...this is where I am stuck. I am a little hesitant as to how I can do this. I don't want to mess this up. The remainder of the instructions in this article seem so simple once I get past the 'boot this floppy' part.
Been trying to reformat my harddrive, format goes well but it will only format it to the fat32 and i want it in the ntfs. now i have tried to convert using the cmd command butit tell me it will convert then restart and for a few seconds it will tell me that it is going to convert may take a few minutes then a few seconds later windows will start and its not converted over. i have the windows xp service pk 2 upgrade cd i tried using that but it never gives me a choice on wwhich file system to use. i know the option is there thou because i installed xp on my mother's as an upgrade from win me and it ask me if i wanted to convert.
I am using Win2000 on both my business laptop and my home desktop. On the desktop, because I loaded Win2000, I chose to use NTFS ... I was told that works better with a home network. The laptop came loaded and is using FAT32.Is there a benefit to switching the laptop over to NTFS and can it be done without losing all my files and being a hassle?
I'm running XP Pro; recently acquired a new LaCie 500Gb ext. HD and trying to convert the thing from FAT to NTFS.Keep getting message"Incorrect Volume Label"
I am currently running Fat32 and as noted in a previous post I am building a new computer. I have copied some files on to cds. What I would like to know (if someone has done this) is that can these files be transfered to the new build as I plan on going NTFS. Will they convert from fat32 to NTFS when copied from the disc or even work at all? Or just out of luck and have to start all over?
laptop comes with win xp home, and is formatted in fat32. also has a partition right down the middle of the HD. How would I remove the partition and convert to ntfs? will i lose any of the information or files if i do this?
Any strong views on the advisability of converting a FAT32 drive to NTFS, after upgrading from Win98se to WinXP Pro? And perhaps a word on the best and safest method to use if implementing this
i used to have win98se before and then i upgraded to winxp pro but fat32 was still there. i used fat32 for quite a while but then i had to use ntfs due to file size limits (2gb) and so i needed to convert fat32 to ntfs. i did that using convert command from cmd prompt. it didnt do it from windows, it said it needs to restart and then do it, so it did thatafter the first reboot windows didn't load up, instead i just got no signal error on my monitor. i tried turning on/off the system but this time not even the boot up details showed up - i just got "no signal" error straight from the restart.
I've heard that when burning DVD ISO files to you HD, you need to have NTFS file system, is this true?I bought a new laptop running XP and it has FAT32 file structure. Is there any what to convert this to NTFS without loosing information and reformatting?
To convert your drive or partition from fat32 to ntfs, type the following at Start Run (assuming it's drive c:): CONVERT C: /FS:NTFS. If you are asked if you want to dismount the drive, you must answer yes. Alternatively, you can use a utility such as Partition Magic.
i have an IDE 200 gb HD and 185gb of i think is used there is 43000 files on it i started the conversion using partition magic and it started DOS to do the coversion and now its stuck at the point where is says coverting file system: thats was 30 hours ago and its still the same.the pc didnt freez the curesr in the DOS window is blinking and when i open task manager it says the DOS is running but but there is no CPU usage in task manager for DOS or partition magici cant access MY_Computer too
With W98/W95B you could easily use a tool to convert FAT16 to FAT32 from within windows and not lose the data (most of the time anyhow) that was on that drive/partition.Is there any tool to convert FAT32 to NTFS without wiping (formatting) the drive/partition? I haven't been able to locate any tools to do this with and so far have been moving/copying the data I want to save on a partition to another partition and then right clicking the partition I want to convert and choosing FORMAT to NTFS instead.
I've acquired an older Dell computer with the FAT 32 file system. I want to convert it to NTFS. I've found many articles with directions on how to do this but I'm having a real problem. After I go to Command Prompt and enter "convert c: /fs:ntfs, and hit enter, it tells me to enter the "volume label for the drive".I've tried many different combo's but always get the notice that I have "entered an incorrect volume label".
I have an EXTERNAL HD. I formatted it in FAT a few months ago. Ever since then, my laptop PC was unable to recognize the unit, but the Mac (which is not working right now, unfortunately) never had a problem with it. When I connect it to my laptop PC via USB, the USB icon shows up and the "USB Mass Storage Device Properties" says the "device is working properly." But the folder doesn't show up in My Computer, and diskmgmt.msc says the device is "Unallocated." Hopefully that doesn't mean the unit crashed because I have some stuff on there.Without losing the data (that should be on it, unless it crashed), I want to convert this thing to NTFS. I did some Google searching, but the instructions on how to do this (they say use convert.exe) aren't working. Moreover, no one mentioned how to convert an External, secondary HD.
I just installed my home Dell Dimension 4700 -- and can't seem to find any MS Office or "Word" options on my "All Programs" drop-down. The system is supposed to have Windows XP resident, but I'm not finding any of it. Also, I want to be able to convert old Word Perfect files to Word -- and vice versa, but have thus far been unsuccesaful in figuring out how to do it.
I bought a new computer.It appears to have been partitioned into a NTFS format and FAT32 format.The default drive for my documents & my pictures etc is the NTFS which I have been using happily. It is Media Centre Edition so I also have a few large files (>4GB) - though I dont keep them long term.NTFS partition has fulled up - but I cant move my large files to other partition to free up space
I've done a little bit of reading but my question is "Should I reformat the FAT32 to make it more of use to me?".I cant really see the need arising to access older OS files, except .JPG's (photo's I had on my old Windows ME Comp) or "Should I move all my smaller files (documents and photo's) to the FAT32 partition and use the NTFS drive for the bigger files?"
In the PROPERTIES page of all the drives on my computer, in the TOOLS page there is a box asking if I want to backup the computer. I'd like know the procedure to do this BEFORE I do it.When I bought the computer, I was instructed to make 5 CDs or 1 DVD for Backup discs. Is this the same thing? Of course, there is much more information and/or files on my computer now. Is it just a matter of copying everything on my computer? What files are essential to backup?
If when you have installed XP along with all drivers, office and updates you make a back up image like ghost, of your system at that point, can this be used as a permanent reinstall if you were unlucky anouth to get hit by a virus or have a corrupted OS, or is it a stop gap until you can reformat and reinstall with a xp disc, and what happens to the data you back up over.
i am considering buying an in car dvd player but don't want to keep my original dvd's in the car all the time in case they are stolen. i was wondering if there is a way of making backups and what the legal status of this is but don't know how to get started.
I recently used the XP backup utility and I found that it worked fine for an immediate backup to my external USB drive but when I attempt to schedule the backup, it fails to occur.I am performing a 'normal' backup to the USB Drive and I scheduled it daily using the wizard. It appears in the calendar and looks normal and consistent with my setup but nothing happens at the appointed time. I confirmed my PC date and time were correct (no AM/PM or date error).I see no indication that it is/has attempting to perform a backup.
I want to buy a USB hard drive to back up my entire C: drive in case of a total failure.I Have Acer E Recovery on my laptop but it will only backup to D:I checked the Microsoft offering ntbackup.exe but it wants a floppy drive, and there isn't one on my laptop.Can someone please suggest a basic/simple solution.BTW I am running XP Media edition but will upgrade to Vista soon.
I need to reinstall XP, but don't want to have to reinstall all my programs + games. I've installed XP and programs to my C drive, games to another partition. My question is, will a complete image backup of C and a registry backup be enuff to restore a fresh installtion to how it was working programs + games and all?I've read around the forums and already downloaded TrueImage for files and Erunt for registry..
Well as ironic as it seems I get the BSod when im making a backup with norton ghost. Dont worry its not a lethel BSod the system just starts normal again. But how do i make backup disks or images ive tried two times with two differnt prgs and they both end up in a BSod.
I am having to set up a computer for a friend of mind and we are having a disagreement on the proper method of backing up information on a hard drive. His system has a Maxtor USB hard drive for backing up the hard drive. He keeps saying he needs a complete system back. I point out that if the entire system is backup on a schedule you are backing up problems as you go. I told him the data is what needs to be backed up (along with the original installation before the data was added. But I am not sure .what is the perferred method for backing up a system?
