Converting FAT To NTFS On LaCie 500Gb Ext. HD?
Feb 5, 2008I'm running XP Pro; recently acquired a new LaCie 500Gb ext. HD and trying to convert the thing from FAT to NTFS.Keep getting message"Incorrect Volume Label"
View 5 RepliesI'm running XP Pro; recently acquired a new LaCie 500Gb ext. HD and trying to convert the thing from FAT to NTFS.Keep getting message"Incorrect Volume Label"
View 5 RepliesI have 2 internal HDDs, and 3 external HDDs. However, the recent addition of a Mac by my sister has forced me to be able to share the external HDDs between computers. I understand that the Mac OSX reads/not writes NTFS but will read/write FAT32. Having been advised by other senior Windows users many years back, all my HDDs are in NTFS. I have found no solution to convert NTFS back to FAT32. Does anyone know if you can do so; without damage/corruption? There is much family pictures, common music in these external HDDs; so needless to say, they are precious
View 7 Replies View Relatedis there any advantage of converting my filesystem from FAT to NTFS?will it cause and problem to the existing data on my drive if i convert to NTFS from FAT?or if i convert back to FAT from NTFS if i dont like it??i want to convert drive e: to NTFS.but since i use both ME and Xp.once i convert to NTFS..i wont be able to access drive e: thru Win ME rite?
View 14 Replies View RelatedHaving read the article found here...http//aumha.org/win5/a/ntfscvt.php I made the bootable floppy ( I hope) with BOOTITNG.EXE as suggested. The article then says I should boot this floppy...this is where I am stuck. I am a little hesitant as to how I can do this. I don't want to mess this up. The remainder of the instructions in this article seem so simple once I get past the 'boot this floppy' part.
View 11 Replies View RelatedBeen trying to reformat my harddrive, format goes well but it will only format it to the fat32 and i want it in the ntfs. now i have tried to convert using the cmd command butit tell me it will convert then restart and for a few seconds it will tell me that it is going to convert may take a few minutes then a few seconds later windows will start and its not converted over. i have the windows xp service pk 2 upgrade cd i tried using that but it never gives me a choice on wwhich file system to use. i know the option is there thou because i installed xp on my mother's as an upgrade from win me and it ask me if i wanted to convert.
I am using Win2000 on both my business laptop and my home desktop. On the desktop, because I loaded Win2000, I chose to use NTFS ... I was told that works better with a home network. The laptop came loaded and is using FAT32.Is there a benefit to switching the laptop over to NTFS and can it be done without losing all my files and being a hassle?
View 7 Replies View RelatedI started the process of conversion to NTFS from FAT32 and I got a response that included: This conversion will also remove your previous operating system backup. Then: Convert may run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID (their caps). Would you like to force a dismount on this volume? What are opened handles? What happens when they are invalid?
And how do I find my backup(s)? I have a folder on my desktop Created Oct.29, 2006 that is faded and labeled _RESTORE. Properties shows that it is 1.21GB and has 951 files that are marked Read-only and Hidden but when I open the folder it shows only 4 files of 64KB dated 2002 and 2004. Is that folder related to backups?I want to create a current backup or restore point but I have only 5.15GB left free. Help, please.
I am currently running Fat32 and as noted in a previous post I am building a new computer. I have copied some files on to cds. What I would like to know (if someone has done this) is that can these files be transfered to the new build as I plan on going NTFS. Will they convert from fat32 to NTFS when copied from the disc or even work at all? Or just out of luck and have to start all over?
View 3 Replies View Relatedlaptop comes with win xp home, and is formatted in fat32. also has a partition right down the middle of the HD. How would I remove the partition and convert to ntfs? will i lose any of the information or files if i do this?
View 4 Replies View Relatedhow can I convert my hard drive from fat 32 format to ntfs? without losing everything preferably
View 4 Replies View RelatedAny strong views on the advisability of converting a FAT32 drive to NTFS, after upgrading from Win98se to WinXP Pro? And perhaps a word on the best and safest method to use if implementing this
View 3 Replies View Relatedi used to have win98se before and then i upgraded to winxp pro but fat32 was still there. i used fat32 for quite a while but then i had to use ntfs due to file size limits (2gb) and so i needed to convert fat32 to ntfs. i did that using convert command from cmd prompt. it didnt do it from windows, it said it needs to restart and then do it, so it did thatafter the first reboot windows didn't load up, instead i just got no signal error on my monitor. i tried turning on/off the system but this time not even the boot up details showed up - i just got "no signal" error straight from the restart.
View 7 Replies View RelatedI've heard that when burning DVD ISO files to you HD, you need to have NTFS file system, is this true?I bought a new laptop running XP and it has FAT32 file structure. Is there any what to convert this to NTFS without loosing information and reformatting?
View 14 Replies View RelatedHow to convert a NTFS file system to FAT32
View 14 Replies View RelatedI would like to convert my external hard drive to NTFS, can anyone give me some easy to follow instructions?
View 3 Replies View RelatedTo convert your drive or partition from fat32 to ntfs, type the following at Start Run (assuming it's drive c:): CONVERT C: /FS:NTFS. If you are asked if you want to dismount the drive, you must answer yes. Alternatively, you can use a utility such as Partition Magic.
View 9 Replies View Relatedi have an IDE 200 gb HD and 185gb of i think is used there is 43000 files on it i started the conversion using partition magic and it started DOS to do the coversion and now its stuck at the point where is says coverting file system: thats was 30 hours ago and its still the same.the pc didnt freez the curesr in the DOS window is blinking and when i open task manager it says the DOS is running but but there is no CPU usage in task manager for DOS or partition magici cant access MY_Computer too
View 9 Replies View RelatedWith W98/W95B you could easily use a tool to convert FAT16 to FAT32 from within windows and not lose the data (most of the time anyhow) that was on that drive/partition.Is there any tool to convert FAT32 to NTFS without wiping (formatting) the drive/partition? I haven't been able to locate any tools to do this with and so far have been moving/copying the data I want to save on a partition to another partition and then right clicking the partition I want to convert and choosing FORMAT to NTFS instead.
View 6 Replies View RelatedI've acquired an older Dell computer with the FAT 32 file system. I want to convert it to NTFS. I've found many articles with directions on how to do this but I'm having a real problem. After I go to Command Prompt and enter "convert c: /fs:ntfs, and hit enter, it tells me to enter the "volume label for the drive".I've tried many different combo's but always get the notice that I have "entered an incorrect volume label".
View 2 Replies View RelatedI have an EXTERNAL HD. I formatted it in FAT a few months ago. Ever since then, my laptop PC was unable to recognize the unit, but the Mac (which is not working right now, unfortunately) never had a problem with it. When I connect it to my laptop PC via USB, the USB icon shows up and the "USB Mass Storage Device Properties" says the "device is working properly." But the folder doesn't show up in My Computer, and diskmgmt.msc says the device is "Unallocated." Hopefully that doesn't mean the unit crashed because I have some stuff on there.Without losing the data (that should be on it, unless it crashed), I want to convert this thing to NTFS. I did some Google searching, but the instructions on how to do this (they say use convert.exe) aren't working. Moreover, no one mentioned how to convert an External, secondary HD.
View 11 Replies View RelatedI'm not completely computer illiterate but i have never set-up a dual or triboot system before.I want to triboot XP Pro, Vista Home Premium and Ubuntu. I have a brand new 500GB SATA hard drive which is straight out of the box. I don't have vista yet but plan on getting it soon (when the next service pack is released) and don't want to have to reformat my hard drive when i do. So i thought it would be better to prepare for it now
View 1 Replies View Relatednew to this forum and looking for a bit of help with my windows xp media edition. A year ago we purchased a refurbished gateway computer with windows media edition already installed on it. The media addition is a legitimate registered program so I can get updates etc for it. Right after we bought the computer and hooked it up to the net a program that was also on the computer (called Big Fix) downloaded 35 updates for my system and installed them. Most of these updates were windows updates. Right after that I started having problems with my computer booting into windows when I turned it on. The windows logo would show very dim on the screen and slowly get brighter......then it would flash a blue screen (can't read what the screen says, it goes by so fast) and then comes back up into safe mode with the option to start up with the "last good configuration known) This doesn't happen everytime I turn the computer on, sometimes it will go a week or two before the blue screen shows again. (although a chilly room seems to affect it more) Now it is happening more often and my "change/remove" option on most of my programs in the control panel are no longer available.
View 22 Replies View RelatedTwo weeks ago I installed win7 on my system,but 3 days ago,bacause of some problems,I decided to uninstall it and to setup an older version.But unfortunately I had many problems to setup another one.Although I had the related DVD in DVD drive,after some seonds it asked for the DVD labeled Win XP.Anyhow finally I could setup win XP 2002,but windows only recognizes drive C with capacity of 100GB and I don't have my other drives as before.For your information it's NTFS.I decided to setup Win7
View 1 Replies View RelatedWindows Xp does not recognize the NTFS partition. Any ideas on how to get at the files?
View 4 Replies View RelatedIs there a way to convert to the 64 bit (64 bit core2) XP without buying a new license?
View 6 Replies View Relateddoes anyone know any programs that work fairly well for converting m4a files of 320 kbps, to a mp3 of 192 kbps. i used to have a program that did this, but i can no longer find it. i've googled and everything. i can't find much.
View 1 Replies View RelatedI have some avi videos I wish to convert to DVD and burn. I used to use this program called ********* AVI to DVD which would convert the avi file and then automatically burn it to a dvd. However after a reinstall of my OS and reinstalling the program i tried loading an avi file and I get this error:"Avi2Mpeg Main has encountered an error and needs to close."I've tried reinstalling the program and making sure I have all the codecs needed but still no luck.
View 2 Replies View RelatedI just assembled a new computer and installed the Windows XP Professional 64x as the operating system. The computer runs perfectly by itself, but as not many programs are yet compatible with XP 64x, I was wondering if there is any possible way to convert from 64x to 32x without completely re-installing windows. Although the 64x Professional is ment for server use, this is in one of my home machines.
View 2 Replies View RelatedI'm converting a Vista machine (purchased new with Vista on it) to XP for a customer of ours because the USB-to-serial-adapter that they need doesn't work with Vista.I bought an OEM (full) version of XP and put the CD into the machine. When the "Welcome to Microsoft Windows XP" screen pops up the "Install Windows XP" option is greyed out and doesn't allow me to begin the installation of the OS. If I click on the greyed out "Install Windows XP" option the PC just beeps.
View 4 Replies View Relatedi know this is the software section but it is becasue i also want to ask this question. what software do i use to convert any movie file format to dvd format which can also be use on a dvd player?
View 11 Replies View RelatedI need my recorded voice on Windows Media Player changed to a dictated/typed form. Are you aware of software that can do that? Free would off course be best, but any will do. have a windows XP laptop.
View 1 Replies View Related