My computer came pre-installed with windows xp, so I didnt recieve a disk with xp on it. I am buying a new hard drive and want to install xp on it. Is there anyway to transfer xp from my old hard drive to my new one without buying a new copy of xp, and if there is, will I still be able to connect to windows update?
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
i recently installed WIndows XP on a very very small hard drive (2 gb) and i have one used for data as slave that is 80gb. The reason i didn't install xp on the big one was becuase i already had a lot of important data on there that i couldn't lose, and i didn't want to risk it. But now i'm running into issues of space on the small hard drive and i need a way to transfer XP to the larger hard drive without risking loss of all my data.
I have an old Hard drive with Windows XP. It came from a HP pavilion 1. Can I install it into a older Gateway or a eMachine. 2. I am the original owner and I would like to keep XP but in another machine it this possible and will I have any problems from Microsoft's "Genuine Check"
I am new to this site and I come here today to ask a question, perhaps someone here will be able to offer a bit of advice.I have a toshiba laptop, running xp pro sp2, 80GB hard drive.Hard drive inoperable due to bad sectors. My hard drive was partitioned into several sections with the C: section containing the os and the D: section containing my data. I could not boot my system so I tried reinstalling os on C: section again, it required a format. I formatted the C: section and then attempted to reinstall os, no luck!Using a third party diagnostic CD I see that my data on the D: partition is still available and intact. The diagnostic disk creates a makeshift os which allows for very limited manipulation of information on hard drive. Since I can not install os onto bad hard drive section C how can I transfer data from the section D: partition to either a new hard drive or to a storage medium?
I want to transfer the local settings (bookmarks, computer display, saved email folders) to my new hard drive. Which folders do I need to transfer over to recreate the look and have access to all my stored messages/folders in Outlook Express?
I did MS Outlook 2003 full backup to an external hard drive just before my computer died and I want to transfer my e-mail files from the external hard drive to my laptop circa 2006.
Bought a new barebones PC and want to transfer my old hard disk with XP pro on it to the new machine.Back in the good old / bad old days of Win98 etc, it was easy to do this as Windows saw IDE as IDE and made no other requests to the system to fine tune, AFAIR.Now though if I transfer the drive I get a reboot, safe mode does the same.I can furnish more info from the boot log if required later but does anyone have a sure fire way of getting the GUI up and running so that it can start updating drivers etc.I'm also transferring the cdrom, dvdrw and most importantly the AGP graphics card so it's not an issue with that
I have transferred a Hard Drive into another computer and thought I had to re-install Windows (XP Home) - this I did.In so doing I created another Folder - Windows2 so as not to overwrite anything. I have a Windows folder as well.I also still have a Windows98 Folder on this drive.I cannot access the latest e-mails in the new configuration - or anything else for that matter and know that I am going to have to reinstall all programs.How and where do I find those missing e-mails, or can I uninstall this new version and revert to the old one?
I was wondering if there was a way to transfer the Program Files folder to the second disk withouth messing up the start path of those programs, and still be able to access them in the Start menu.
I am after help in that i would like to take hard drive, volume 27g from one laptop win xp pro, and place on another laptop 80g win xp home.I do have memory flash but only 256mb.I also think i will need to look at partioning drives do hope i get a reply/plural great support
I have tried using my Upgrade Disk to install it on my new disk, but it didn't work right. It added a menu during start up to include a second Operating System choice but it wouldn't load. I removed it from my new drive in order to start over, but now that stupid menu choice is still there.First, how do I remove that? Second, how do I go about Transferring my Operating system to my new drive without buying a New Operating System?
I am trying to import files and settings from old PC to a new one using a flash drive.The files were collected and are on flash drive File name USMT2IMG.Dat What is the procedure to get them on the new PC so they will be imported?I copied the file and it is in My Docs but when I am asked where to look for the file it is not there to select. I know it is there because I can open My Documents and see it.Don't understand this at all.
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
using XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP . well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
I recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
I can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
I am facing two problems with my lap top hp campac presario 2100. 1.The loptops battery to be changed. I dont know how many batteries are there. Any cmos battery there like any other pc. Pl advice. What would be the cost. and the model number . The hard disk requires replacement. I want to know the model numberor exact type of hard disk would be fit in. and the cost thereof.3. Windows xp home edition has been preloaded in the laptop. How to take a copy of the os and copy in the new hard disk. I have the serial number etc for the OS.
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
I use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
A little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
A friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
I had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.