System Not Boot With Cd Rom
Aug 30, 2007I wanna format my computer. I have a window xp CD. I place my XP cd in cdrom tray and restart my computer. It unable to boot my window xp CD. so wat i gonna do?
View 7 RepliesI wanna format my computer. I have a window xp CD. I place my XP cd in cdrom tray and restart my computer. It unable to boot my window xp CD. so wat i gonna do?
View 7 Repliesfirst i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies View RelatedI accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
View 5 Replies View RelatedI have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies View RelatedI"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done:
1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%)
2)Removing all connected Componets and rebooted, same problem.
3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....
hey anyone remember that boot disc that had everything and it also had a mouse function in it? it was like boot magic or something i cant really remember. I only remember it had 2 versions one was the floppy which was free and the other you had to pay for the cd version
View 3 Replies View RelatedI bought a computer for my wife and kids. Well months go by and my wife tries to install something and notices that the MAIN drive is H: not C:
I figured that it was weird but no big deal. Well I purchased a printer for her and while trying to install the software it was giving me a "Windows - No Disk in Drive" error.
I did some research and spoke to HP tech support and they suggested that I search the web for a way to change the drive letters from H: (current hard drive) to C: (supposed to be default drive)
I have a dual boot environment with two Win XP installed on different disks, XP1 and XP2 . XP1 was installed first and contains the boot files (NTLDR, boot.ini...) and XP2 came second. Now, I would like to keep XP2 and get rid of XP1. How can i delete XP1 since it contains the boot files? if i delete XP1 i am afraid to not be able to boot on XP2.
View 14 Replies View RelatedI cannot boot windows, I think my boot file is corrupt and would like to know if I can use a boot cd instead of a floppy.I would appreciate it if someone could tell me what i need to do.
View 3 Replies View Relatedi was trying to restore my backup of the partition with the windows xp system on it. Of course, everything went wrong and Norton Ghost 2003 had an error at about 95%. I thought i can just boot from the win xp cd and fix the problem... no way when i try to boot from the win xp cd, i get a black screen after checking my pc configuration, no driver loading etc.
when i try to boot from my sata drive, it says that there are some missing files (that's not strange, if ghost didnt work like it should) when i try to boot from any other drive i get an error like this: A problem has been detected and Windows has been shut down to prevent damage to your Computer. If this is the first time you've seen this Stop error screen, restart your computer.If this screen appears again, follow thease steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run chkdisk/f to check for hard drive corruption, and then restart your computer. Technical information: STOP: 0x0000007B(0xF8958640, 0xC0000034, 0x00000000,0x00000000)
i am getting a Boot Failure message on my computer when I start it up. It seems like it is trying to boot from the various devices, Then I receive the Boot Failure message.
View 4 Replies View RelatedI have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
View 1 Replies View RelatedI have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
i rescently had to format the drive for a fresh copy. I have installed xp home retail version and realised i wanted to try something diferent. At system start the computer starts up prior to the windows boot screen and displays COMPAQ in big bright bold letters with option of F10 for system restore which is no longer on system (reformated) as well as other options for boot select pres ESC and F1 for setup.Can i remove this from my system? and then can i create a menu with 2 options 1 load windows normaly and 2 install a disk image stored on a hidden partition? maybe like the F10 key assighn that to access the imge and install it.
When i startup my computer i get this message.."WIndows cannot start because the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYSTEM"
I have a laptop, a Dell latitude d610 that says:Windows could not start because the following file is missing or corrupt: windowssystem32configsystem I attempted to try the fix listed here:http://support.microsoft.com/kb/307545 but when I went to copy using the command: copy c:windowssystem32configsystem c:window mpsystem.bak into the tmp directory I created it said: File could not be copied.
View 4 Replies View RelatedSo i booted my t400 ibm laptop and this error message popped up as stated in the message title.My harddrive is in achi mode and i was wondering if i switch the harddrive mode and do a repair with an xp cd, will i lose any files?
View 1 Replies View RelatedIt says windows can't be started up because windowssystem32configsystem is damaged or can't be found.I already tried bootcfg but doesn't make any differnce.
View 9 Replies View RelatedI have a dual boot Win98, WinXP system. I reformated the win98 drive and started over. When I did this the computer only booted in to 98. So then I reloaded WinXP. Now it only boots into XP. Also, when I got into Control Panel>System>Advanced>Startup and Recovery, only one system is listed. It used to give me the choice. How do I fix this? Here is my old boot.ini file. I tried to find a new boot.ini file so I could rewrite it, but I couldn't.
[boot loader]
timeout=5
default=C:
[operating systems]
C:="Microsoft Windows"
multi(0)disk(0)rdisk(1)partition(1)WINDOWS="Microsoft Windows XP Professional" /fastdetect
If someone has one physical drive with Windows 98 on C:windows and Windows XP on D:windows, what should their boot.ini file have in it so that they can chose which one to boot with?
View 2 Replies View RelatedMy Toshiba notebook won't boot. I have tried starting in last known good configuration and safe mode but I keep getting the same error. The OEM toshiba recovery CD won't let me do a sytem repair. The computer had been working fine and when I restarted it, it came back with this error. Please help I don't want to have to do a complete reinstall and wipe out my data
View 2 Replies View RelatedMy pc was running fine when it just started beeping like a warning klaxon. Rebooting didn't help, but rebooting into safe mode then normal mode did. Then 1 hour later while running spysweeper, I stopped the scan early because it was taking too long. It detected 1 adware and 1 trojan, but the log said the trojan (ruin) could not be quarantined and some threat was still in memory, despite a problem free pc except for the beeping which I thot was resolved. After exiting spysweeper
my pc locked up and could not be turned off manually, so I unplugged the cord in back. Then I got a blue screen after it tried rebooting. The bootup started normally, but then a blue screen read as follows, more or less-If this is the first time you are seeing this message reboot your pc. Otherwise check for viruses, remove any new hard drives or hard drive controllers. or refer to your startup manual. I can't even boot in safe mode.
I hate to beat a dead horse, but thanks to the many previous posts concerning my System Restore problems I did the scans, and tried all recommendations and got it working fine (I thought). But now, I find that every time I re-boot, or shut down at night and start up in the mornings, all of my restore points are lost and a new one is established at the time of my boot up.I have tried to right click on the file C:Windowsinfsr, and select install, but I am prompted for the XP Pro CD (I use XP Windows Media Edition 2005). I have an HP a1624 with a Recovery Partition and no CD, but I am working to get one from HP. Also, in the inf directory, there is also a sr.PNF (Precompiled Setup Information).
View 18 Replies View RelatedI have an old HD From a system that I got rid of. I want to put it into a friends system to see if I can retrieve the files off of it and put it onto my external HD. The hard drive was the boot disk and the computer I am installing it on has it's own boot disk. If I boot up with two boot disks will there be a problem? Is there anything I need to take into account before doing this? I am planning on installing the old HD onto an ATA cable that I unplugged from the DVD drive. The HD that is in this system is not on an ATA cable, I'm not sure what it is connected to, just a small plug with a blue cable going to the mother board.
View 3 Replies View RelatedI have 2 computers (well more than that but for this i have 2) One works and one doesn't. I took the hard drive out of the working one and put it in the non working one as the master. (BTW on the non working one its just the hard drive that is working properly) I put the hard drive from the non working one as the slave so i can try and get some files off of it and format it. So I boot up the system and the computer recognizes it but then i get an " Error Loading Operating System" error.
View 1 Replies View RelatedI'm running XP SP3, Home version. I've tried F8 on boot, and that doesn't work. I've gone into msconfig, and curiously, there is no boot.ini tab. The closest thing it has is an option for "Diagnostic Startup." I'm assuming that's the same thing but want to take no chances. Is it the same thing? Any pitfalls to watch out for?
System restore. Here's the reason that I have to be so careful: I can't get system restore to work, regardless of the date I select. I'm wondering whether I can get system restore to work from safe mode (or is that the only way that it will work?). To be honest, I'm nervous about changing the msconfig to Diagnostic mode without system restore working, because I had a friend who changed his msconfig to Diagnostic and his pc wouldn't stop booting in that mode even when he changed msconfig back. Without system restore, he wouldn't have been able to undo the change in msconfig.
I am using TG Dreambook J7 with XP2 Prof. Edition. i want to reformat my hard disk coz windows hangs up during boot.. i have an external dvdrom via USB. every time i boot i got "insert system disk".i could not boot using my external dvdrom.
View 14 Replies View RelatedI have had trouble recently with a worm on my windows-2000 server, I spent a few hours getting rid of the little blighter, however I now have a machine that will not boot up completely.
Being paranoid I have my c partition set as Fat32 and dual-boot so I can boot onto the drive under windows-98 and poke about a bit.
What happens is the machine comes up as normal and gets to the "Preparing network connections" - then it just stops there, I've tried safe mode but that's just the same. I've had a look through microsoft's website and checked a couple of manuals to no avail. I get an error message about the application log being full and if this is the first time you've seen it etc etc and also "some services did not start" so things are coming up in the background but I cannot log onto the console.
I reinstalled and reformatted my hard drive, and the other one inside.I have a drive calledC: (Boot) SATAII - XP on on itD: (System) IDE - Just Data on itI reformatted C and D.The C: seems to require D: to load XP though- Is there some boot.ini to fix this?- I tried changing the BIOS order but that wont do any good.It appears they now work together and windows won't boot without the other drive.
View 2 Replies View Relatedmy system fail to boot without the xp cd
View 1 Replies View Relatedi believe my system when i turned it on would just turn back off, i unplugged cd rom drives, one of my 2 gigs of memory, 8in1 usb card reader, and then it started working till today i goes to the "loading windows xp" screen with the blue status bar then before the blue status bar makes its first pass the computer restarts i unplugged everything like i did before but it still does it i have had this computer for about 2 months now with no problem now its acting up
View 8 Replies View Related