I am using TG Dreambook J7 with XP2 Prof. Edition. i want to reformat my hard disk coz windows hangs up during boot.. i have an external dvdrom via USB. every time i boot i got "insert system disk".i could not boot using my external dvdrom.
View 14 RepliesOn boot sequence, PC hangs on Windows boot screen - with the good old progress bar churning along for eternity. It just stays there. It is possible to boot into safe mode, safe mode with networking, etc. but never boots up normally. 'Last Known Good..." does not help at all.
I have tried 'repairing' XP using the recovery console (deleting the boot.ini file, then BOOTCFG /REBUILD and then FIXBOOT) to no avail. Do not know where in the boot process it is getting hung up and not totally sure how to determine that.Using Windows XP Media Center Edition with SP2. Plenty of RAM and disk space.
Had this problem once in the past and it seemed to self correct after about 50 reboots.
Does this sound like a re-install of XP is required or are there any other options that might work?
i have ONE hard drive with partitions. I had a really bad setup first, I had 1 partition with 3 windows installs on it, folders like WINDOWS, WINPRO, WINN, I never took the time to delete them or whatever, and I was using winpro as my main OS. When I was running the above setup, when I boot up it would ask me: Select what OS to load Windows Pro, Windows Home, Windows Home
I decieded to install Windows 7 Ultimate 64 bit, worked flawlessy, but I wanted to go back to windows xp pro 64 bit. So I made a new partition and installed windows XP pro 64 bit onto it. when I tried installing windows xp with my CD, the first part would work fine, but then when it restarted to continue the setup, it would load my MOBO logo and then after, it would just show a blinking underscore "_" on the top left corner, and nothing else.
I managed to install a fresh windows xp from my USB flash drive, but when booting up normally it still does not let me select what OS to log on to, it just shows the blinking underscore in the top left after the MOBO logo passes, I actually have to boot by USB drive to boot this fresh install of windows. I think something is wrong with my boot loader, but have no idea how to fix it.
I have an intermittent problem, xp hangs occassionaly at the boot screen. If I unplug the system when not in use it doesn't happen as often. WEIRD. When it does happen I have to leave the system unplugged for about 5 minutes or it won't boot. This has been happening ever since I upgraded to home XP from ME. It is a legal XP CD. I have a new amd athelon 1.2 motherboard and XP drivers for my hardware.I even reinstalled XP but the problem persists.
View 1 Replies View RelatedThis makes about the 6th time I have done the install. When it boots, it hangs for between 10 and 30 minutes at the XP splash screen. The blue bar just goes back and forth but nothing happens like forever. I had tried to replace my HDD as well with an WD SATA 320G HDD, but the bios won't detect it. I tried installing a 40G HDD that had 27G of free space on it. I had been using it as a secondary until my primary went TU last week. I kept running into the problem of it hanging on installation. It would get to the point where it was installing drivers and just stop.
Due to problems that I have been having I went out and bought a new motherboard. I am now running a 1.8G Pentium 4 on an Asis 848P motherboard with 512M DDR Ram. I removed both the 40G HDD and the SATA drive from the system. They are no longer attached. I took a 13G HDD that I had removed to put in a bigger HDD and decided to use it.I did a clean install on the 13G HDD. I formatted it during the installation. Because of the other problems, the only devices that I have connected is the video card, an ATI Raedon 7500, the HDD, keyboard and mouse.The blasted thing still hangs on booting! Because I wanted to know if it happened I activated boot logging and this is what I got.
My OS is Win2K Pro and when attempting to boot yesterday my computer hung on the Go Back app and would go no further. During several subsequent attempts I got far enough in the boot process to get an error saying my keyboard wouldn't work. Using a third keyboard I somehow got a full boot with my Windows CD and quickly ran a virus scan showing no infection and thought everything was okay, took out the CD and changed the boot sequence back.Now I'm stuck on the Go Back screen again. While in BIOS I discovered it said the year was 2002 and thought that was why Go Back hung but reset the clock and still nothing works. I can't boot to safe mode (only beeps when I tap the keyboard), now the windows CD will not boot the machine. I've tried to do a reinstall, but am told two small partitions are too small (no option for changing their size) and for some reason can't install on the primary partition, just a note saying I can't, nothing else. I can only get to Set-Up and BIOS. I've tried burning different boot disks to CD (no floppy drive)on another computer but only get Retry Boot when using them.Various times I can get far enough to get Go Back to load then try to revert, but just get a Wait notice from the app and nothing further.No sounds when booting unless I tap F5 or F8, sometimes F12 beeps every time I tap. Of course I haven't backed up my documents and WAB, etc. so I'm trying not to delete partitions and start over.
View 9 Replies View RelatedMy C: drive crashed and I used that excuse to buy a WD3200 320G SATA drive. My old MB wouldn't support the SATA so I bought a ECS 848P-A and a 512M DDR memory.I tried a new install of XP (Home) onto a 40G drive as primary which had 27G free space. It would only install to the point where the screen was saying installing devices and there was 33 min left on the install. At that point it would stop. The little bar on the lower right would freeze. I left it like this for over 30 min to see if it would clear, it never did. I figured that there might be a problem with stuff on the drive so I removed it and installed a 13G that I had laying around. I formatted it during the install so it should have been clean. It would install and ran until I installed the motherboard and video card drivers. When it went to reboot it would quit. It would go to the XP splash screen and stop. The blue bar would keep cycling but it would never proceed.
View 6 Replies View RelatedMy PC froze durring hybernation the other day, and I haven't been able to boot it since. It will post, but freezes before it gets to the desktop. When I try to boot in safe mode, the scroll of drivers hangs at mup.sys.Disconnecting all USB devices, and disableing USB through BIOSSwapping out video cards, 80-pin conducter cable and memory Taking out my primary hard drive and repairing the windows install on my second drive to try to boot with it.Switching to the backup BIOS on my motherboard Booting to the recovery console and disableing mup.sys
View 14 Replies View RelatedWhen trying to boot my computer it freezes.I have tried to boot into safe mode with no joy and then safe mode with command prompt.The last entry with command prompt is:multi(0)disk(0)rdisk(0)partition(1)WINDOWSSystem32DriversBTHidMgr.sysNow using the little I know about computers I am guessing that it is hanging whilst loading the driver BTHidMgr, what ever that may be and at a guess I either need to delete that driver or repair / replace it.... but.... thats about as far as I can guess.
View 5 Replies View Relatedbooting my cpu because it hangs at the loading screen. I have read a lot of posts but none of them help because I can't get the cpu in safe mode. I have tried all the options and all kinds of boot disks.It won't let me use my keyboard to highlight any of the options where it says windows had problems loading and gives several options like safe mode or last good config. The keyboard will let me into the bios but after that it won't work. f8 won't take me to safe mode and it won't boot to the cd either. I had this problem once a few weeks back but I created a boot disk and after I booted from that for several times it started booting on it's own. I got the boot disk from a web site but it wasn't an xp boot disk.(i think it was an 98se or me disk) Well of course now either I have lost the disk or it just won't work anymore. I need to find a way to at least boot it long enough to get the data off. the file system is ntfs and I am using windows xp pro.
View 5 Replies View RelatedMy XP has recently started freezing after the xp loading screen. I have to restart several times for it to work properly. I've tried to fix it with registry scanners etc.
View 8 Replies View RelatedI just bought a Seagate ST3400620NS SATA HDD. I want to install it as a second HDD just for storage. I currently have a ST380815AS with the OS (XP SP3) on it as the primary drive. The PC (HP DC570 SFF) boots fine with only the primary drive installed. When I add the 2nd HDD the the system recognizes that I have added a 2nd HDD. It asks me to save the settings by pressing F1. I do that. The XP boot screens displays. The blue progress bar moves once and the system reboots. I switched SATA connectors for the 2nd HDD but when I boot I get a message that I need to move the connector back to the original spot.Then I thought maybe the MOBO (Hewlett-Packard 0A64h ) only supported 1.5 gb/s. Not the case. So I am totally stumped. I checked HPs website to see if there were any updates, and there was an advisory that a different model Seagate HDD might cause a similar sounding problem but no mention of the model HDD that I own.
View 2 Replies View RelatedProblems have been.#1.would only start in safe mode.#2.if try to start normal hangs up on logo screen.#3.tried to do chkdsk and restarted...after restart wouldnt even go in safe mode(hung up at system32/drivers/agp4440.sys)(also some other files were missing at other times).#4.Could not not access cd rom to burn files(tried to backup drivers and could only send to floppy,which worked ).#5. I erased 1 harddrive with system suite6 professional(only one because windows told me the 2nd one was not formatted)and now i am trying to install windows xp and at first had a hang up at setup on an ntfs file,retried and got "corrupted file sym_hi.sys message".found out online it could be do to bios settings or actual physical sdram memory problems,so i fiddled with bios setttings and got windows to install and restart now it has taken about an hour and a half to finish and finalize.my question is...does anyone know what all this means??is it an old piece of crap?,do the bios settings need changed?
View 14 Replies View RelatedI am using windows xp and just moments ago I get a problem. windows will not boot at all. Nothing unusual at start up but no windows icons/usual windows start up appear and computer sits there fans running. If I try to start in safe mode the computer hangs at system32/config/system along with the usual prerequisites and does nothing after that.Circumstances right before this started.I plugged in an old IDE harddrive(making 2 harddrives plugged in) in order to retrieve some old data. Everything starts up fine but windows freezes 30 sec into startup and the mouse moves but nothing happens(much like my previous registry problems).Restarting leads to the problem stated above.
View 14 Replies View RelatedI get up this morning and turn it on, it seems to boot okay, but after the Windows XP logo and the little blue loading bar it hangs at a black screen until after about five straight minutes I get fed up and power down. I tried booting in safe mode and that worked fine a minute ago, but now I am trying safe mode again and it hangs at a file called Mup.sys and will not proceed with the boot.
View 2 Replies View RelatedI have been suffering through a weird phenomenon lately. Whenever I go to IE the first time of any boot or reboot, it "hangs" after filling up the status bar for several minutes, then releases and all is well. (NOTE: I don't think this is IE-specific. It has happened booting apps, but I notice it most with IE as I use it extensively.) When things seem to lock up, EVERYTHING is locked up. I can't even bring up Task Manager, none of the icons in the Task Bar are active, etc. Sometimes I can Tab through other apps that are open, sometimes not, but when I can, the app is "frozen" until whatever is going on finishes. During this time, I can watch the process light (I have a Dell D600 laptop) going nuts. Before and after this event, I have run the system through the latest updates of utilities such as Ad-Aware Plus, Ad-Watch, PestPatrol, Symantec Antivirus, Ace Utilities, RegSeeker, etc., and none of them sends up a flag that anything is wrong.
My machine is always up-to-date via Windows Update feature, so I don't know what is causing this. I had the bright idea to reinstall XP SP2, but can't. Every time I try, it quits, giving me nothing more than a smal window with a red X in it and the notification that the install has been cancelled. I ordered the free XPSP2 CD just to see if that would make any difference, but I get the same error. I suspect I could attempt a slipstream install, but I don't want to go through all that if anyone out there recognizes this problem and knows what the solution is outside of doing a slipstream reinstall of SP2. Finally, I have several times done System Restores going back as far as I can, but while they have been successful (although I usually have to do the restore in Safe Mode as they will often fail otherwise), it has made no difference related to this problem.
My Laptop (running XP) will boot up to the login screen (which now takes about 5 minutes when it used to be less than 1 minute). Once I enter my login information and hit enter it stalls for about 5 minutes and then returns to the "ctrl-alt-del login screen".I have 2 "profiles" and can successfully log in to one under the administrator login but I don't get a start button and the windows look "different". For example, the expand/minimize/close buttons when I run the task manager look more like how I remember windows screens looking years ago if that makes any sense.
View 14 Replies View RelatedI have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode.
I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having.My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts: c: 30GB FAT32 primary d: 30GB FAT32 " e: 30gb FAT32 "
My computer shutdown and on boot up it hangs at the black screen showing the white bar at the bottom. I have Windows 98 and 2000 on my computer and neither will boot up from C:, CDROM, or StartUp/BootUp disks. When I try to boot up from the Windows 2000 boot up disk it sometimes will not get passed the blue screen showing 'Windows 2000 setup. Once or twice it has shown some functions in the bar at the bottom of the page. I have tried to boot up using Windows 98 start up disk but most times it hangs at C:. Last night it did open Windows 98 but would not let me reinstall 2000 or do a repair. It now is hanging in both OS. I am told it could be my memory...but how do I check? Upon start up my memory check shows all is okay. I have ran the utility disk for my hard drive and it says all is okay. Before I invest in new memory is there anything else I should check or try? My computer is older and the memory is quite expensive.
View 8 Replies View RelatedI've had triple boot on my PC, 1st partition Windows Vista, 2nd partition Windows XP and on the other 3 partitions Debian Ubuntu (extended partition). I'm using Grub as my boot loader, everything was working fine, booting all 3 OSs was no problem. About 3 months ago my Vista OS stoped working (because I did some bad things with it) ... actually it isn't that important how I did that, because XP kept working (and Linux, of course, too). Like 2 weeks ago I decided to remove Vista, so I removed it using gParted by simply formating the 1st partition to an empty partition.Now my XP stoped working I thought it was because the boot.ini was placed on Vista's partition. So I used my XP installation CD to do fixboot etc, even fixmbr and I ran a chkdsk over the XP partition.
View 12 Replies View RelatedLooking for some help, started having problems yesterday when i noticed that my PC took a bit longer to boot than usual.I've had a few crashed when writing to disk, i presume this as i was downloading a dj mix (perfectly legit, from a music forum!) and the screen would freeze, no error messages and i had to turn off. Same thing happened again, i defragged my drive and still has issues, almost freezing, stuttering but if i stop surfing, it recovers.System is C2D E6400, Segate SATA 160GB, 1GB Corsair value ram no over clocking.
View 1 Replies View Relatedstays hung for about 52 seconds, then unhangs for 52 seconds, then hangs for 52 seconds, I am running an older Compaq desktop with a Pentium III processor, and a 30 GB hard drive (approx. 11 GB free). The system has 256k RAM.It is running Windows XP Home Edition, Service Pack 2 (build 2600.xpsp_sp2_gdr.050301_1519). It also has Norton Internet Security 2004 (v7.0.6.17) and Norton Antivirus (10.0.1.13) with current virus definitions.Sometime in mid-September, my husband (who uses this machine, not me) complained that the machine was hanging on a regular basis. He bought and installed System Mechanic 5 from ioio. (No other new software or hardware was installed immediately prior to the appearance of the problem.)He found a number of problems, cleaned them up, defragged the disk, but the hanging problem remained..
He asked me for my help several days ago, and using the information gleaned from this site, we've downloaded and run the Ewido 3.5 scan (and fix - both free), and then Xoftspy v4.16. I purchased a registration key for Xoftspy, and we've run the fix utility from that, cleaning up the threats, but the hanging problem remains.I'm attaching a log that was created tonight from Hijackthis v1.99.1 in the hopes that you can save us from this problem! I have better things to do than struggle with this.
IE8 downloaded and hangs. tried to cancel and it just stayed on the screen running the IE8 downloading screen. I used the start menu to shutdown the pc.
on restart it lets me go to the bios. nothing I see there helps. I know just enough here to be dangerous restart if I pump the esc button the option to "start from" appears, but, if I choose anything it just hangs. I cannot access safe mode by pressing f8. it does nothing . goes to a black DOS like screen with a blinking cursor won't let me type anything and beeps at me except it will let me turn num lock on and off and use crtl+alt+delete to restart
So I'm running XP on a pretty decent laptop...
3 GHz P4
768 DDR
64 MB Radeon
60 GB HD(40GB free)
The problem i am having is that when i right click on a FILE i get the hourglass for about 10 seconds and just the context menu is not loading. Nothing else on my computer is hanging. When i right click on a FOLDER it goes instantly.I KNOW WHAT YOUR THINKING, that i have some shell extension installed to do something special with files. Well, just to prove that wrong beforehand... I have two external hard drives. When i right click on a FILE located on one of those drives, it goes instantly.
So i thought maybe it was my hard drive... So i moved 30 gigs of music off of it, and i defraged it.
I have an old computer. My uncle threw it together from scraps and sent it to me. It ran very well for about a year or two. It runs off Windows XP Professional. The problem with it now, and i just cannot figure it out, is when i go to start the computer. The computer boots normally, and so does windows, however when it displays "windows XP" just before showing the users list, it freezes. The mouse still is able to move, but it is as if there is no more users at all on the computer. I have been tinkering with it for over a year and still cannot find a way of getting into it, or getting it to work. Reformatting the computer is not an option because i have important information on the hard disk. Got any advice?
View 10 Replies View RelatedMy system hangs also mouse and key board dont work until restart the computer.
View 2 Replies View RelatedI've got a problem with my PC and I'm trying to solve it without reinstalling Windows.When I launch certain programs or games system just hangs and stays like that until I restart it...It does this with totally random things like: on final 'Release date check' of GTAIV installation (which worked some year ago onsame Windows)when opening video feed from SB Audigy 2 ZS Video Editorhappened a few times without running anything but very rarelystarting BioShock 2 pressing PrintScreen (didnt happen until I added Logitech G19 to my PC)
View 14 Replies View RelatedWhen attempting to install win xp home edition sp2 my systems hangs on the creating cabs creating file sp2.cab. This has happened several times. As a result i,m unable to install sp2, I currently have service packs 1 and 1a installed.
View 7 Replies View Relatedmi pc hangs always in 3x% percent i removes all devices and try again ..low format to my hdchange ramchange hd update biosreset cmoscheck temp nothing worksalways crash
View 14 Replies View RelatedOk this morning i downloaded the new itunes 7 an when I went to use it the songs were all distorted an it locks up my system. So if youre thinking of downloading it I wouldn't do it. an does anyone know where I can get a link to the itunes 6.
View 12 Replies View RelatedUsing XP Pro - installed SP2 two days ago. I did everything recommended prior to install, such as updating everything possible (including BIOS). Ad-Aware and NAV 2004 (up to date) both indicate a clean system. NAV 2004 disabled during SP2 install. Defragmented and checked disc, etc, etc.Since installing SP2, System Restore has stopped working. I noticed it first when auto update downloaded updates after the SP2 install. When I tried to install them, the install just hung (because it tries to create a restore
point prior to installing the updates, and System Restore won't run). So I can't install updates either. I'm not even sure what 'HarddiskVolume2' refers to? I only have one disk (C with a very standard XP Pro configuration.In September last year I tried installing SP2 but ran into the same problem. I spent days trying to sort it out, but eventually the MS people recommended I remove SP2. They said it may have been a corrupted download, so this time I ordered the CD. This install was from the CD, but exactly the same problems have occurred.Booting in safe mode doesn't help because it doesn't let you create a restore point, only to restore to a previously created one.System Restore was working perfectly for 2 years prior to this under SP1. I would rather not turn it off, because I don't want to lose the restore points I have to get back before the SP2 install! What else can I do???