I had problems with my anti virus that the help desk said required a Windows repair. I did this but now all my setting etc have disappeared.
What I can see is that when I look at 'Documents and settings' there are extra users directories.
These are:
All Users
All Users.Windows
Defaults Users
Default Users.Windows
I now have 3 Network Services NT
I also have two directories of me.
I can delete them using explorer.
To use this setting, type the fully qualified path and name of the file that stores the wallpaper image. You can type a local path, such as C:Windowswebwallpaperhome.jpg or a UNC path, such as \ServerShareCorp.jpg. If the specified file is not available when the user logs on, no wallpaper is displayed. Users cannot specify alternative wallpaper. You can also use this setting to specify that the wallpaper image be centered, tiled, or stretched. Users cannot change this specification.
View 9 Replies View RelatedGot a problem here with a classroom full of Windows XP Pro PCs, where if I put new shortcuts into All UsersDesktop, when a user logs on they can only see the shortcut as an unknown file type which does not run. Any existing shortcuts in All UsersDesktop work ok, just not any new ones!The PC's are on a Windows 2003 Server network (with AD) and have local user profiles.
View 6 Replies View RelatedWhat is the best way to share execution priviledges between limited users, power users, and administrators?Say an application has already been installed by a higher priviledged user type, and a limited user cannot execute it - e.g. an ISP login software, or Spy Sweeper. Note: ISP login software lacks profile, so I suppose I could just create that, however, Spy Sweeper is a head scratcher.Should the application be uninstalled and reinstall under All Users? How do you install an application to allow All Users to use it?I have already tried to use the "Run As" right-click Properties w/Shift key approach and that does not work.Is there an approach with regard to local security policy that would do what I want to do? How is that done? Or, is Access Control List the way to go?
View 1 Replies View RelatedCan xp he users get remote assistance from xp pro users?
View 1 Replies View RelatedUnder Windows 2000, when I reformat the computer, I add administrator user as a network user in the install process. Then, I go in and add local users to the computer. Later on when I want to add network users, it won't let me, the computer just hangs.
View 3 Replies View RelatedI replaced my original HD with a new, bigger one, installed Windows XP - everything was ok until then. Then, when I verified that everything worked fine I installed the old HD again, this time as a slave.I needed to retrieve some files from it and then I was going to format it and use it as a storage.In the process of installing it,I had to remove the floppy drive,because there was not enough space inside.It wasn't working anyway and I haven't used it in months. Everythings seemed to go fine, the pc saw the second HD, I was able to copy files from it,but when I wanted to install some software on the new HD I realized that Windows Explorer couldn't see any of my 2 CD-ROMs.It's as if they are not hooked up to my computer.
The funniest thing is if I go to device manager, it doesn't show the CD drives, but shows floppy drive and says it is working properly! And it's not even there! Just realized that Explorer also shows floppy A in My Computer.How is it possible? And what happened to my CD drives?At first I thought I accidentaly disconnected the wires when I was hooking up the second HD, but they work mechanically, ie. the light blinks when I start the computer,
I am trying to hook up an external monitor to my lap top I can get my background to show up but no icons
View 3 Replies View RelatedI want to add a second email program and make it the default. How can i accomplish
this? My present program is OE 6 and OS is Home Xp SP 2
I received more memory after researching what my computer needed. I have an old MSI motherboard with 512mb and 2 empty slots so we bought 1 more 512 and installed it. In My Computer under properties it shows now as pentium 4 cpu 1.60ghz 1.60ghz, 1gb RAM.
When looking at used and free space it still shows used space as: 16.6gb free space:20.5 gb and capacity:37.2gb. Which was the same with just having the 512mb of RAM
I was wondering if anyone knows of a way to password protect a folder so that if someone got to snooping around my system they would have to put in a password to veiw the contence of the folder? Is there a program I have to use?
View 3 Replies View RelatedI was installing my scanner onto XP and when I plugged in the usb it didn't like that port .. .. so it created an "E" drive to my computer. I was told there was an error occured and when I switched usb ports all worked fine, but,
how do I get rid of the "incorrect E drive" that was created?
I am having a 'blank' desktop icon added when I exit cbsnews.com. At least that seems to be when it happens. When I right click on the icon it says
Type of file: File
Description: blank
Location: c:Desktopetc
Size: 196 bytes
Size on Disk: 4.00 kb
I added 1GB to an existing 1Gb of RAM but it is not being reconized by the computer.I have 3 slots and the 512MB chips are closest to the CPU.The Everest utility only shows 1GB of RAM,plug'n'play is enabled if that makes a difference. It feels and looks like the chip is well seated.The chips is by the same company (PNY) and it is a PC2700 DDR just like the existing 512s.
added new hard drive my computer sees it but need to know how to partition it
or add them together to use the memory using xp
I'm getting a new motherboard, Processor, Ram, and Graphics Card.
I want to add these to my existing setup, where i will keep the 2 hard drives, the 2 dvd drives, floppy, and sound card. ONe of the Hard Drives has WinXp on it. Will there be any problems by doing this? Will the OS be ok with recognizing the new hardware? Will Windows complain about authentication?
I noticed my standby button was grayed out.I haven't really tried to seek out an answer for this but sometimes I would like to put my computer in standby. I think it may have something to do with a power setting or a driver installed.
View 1 Replies View RelatedI've had this Compaq since 2004. I've added a gig of RAM, a 250gb SATA HDD, and a 6600GT card.
Anyway, I want to do a clean install of XP, which I've never done. I've cleared a bunch of space on my 250gb HD and transfered all the files im going to keep from C: to the 250gb.
So my question is what will happen to my 250gb drive? Do I have to disconnect it? Will XP recognize it after the clean install? What about the extra RAM and 6600gt?
I recently reloaded windows xp from scratch in a 2004 dell inspiron laptop using Dell cd's. It was working fine with sp2, but later I added sp3 and now computer takes about 5 minutes to open an application (anything from MSOffice apps to web browsers to anything else. After it finally comes up, it works slow but doable.
I would like to know what are the things I should be looking at that could be slowing the process so much. Is sp3 related? I'd rater not remove sp3 since all the applications were loaded after sp3 was installed
My operating system is totally screwed. Tried everything to fix. I am going to re-install - wiping out all old data - fresh start. I've backed up all files and programs I don't want to lose to DVD. It's been so long since I've done this. On win 98, I used FORMAT C:, but I see XP gives you the option to install over existing(defective) system, while removing it. I'm pretty sure I need to remove all added hardware and replace with original before re-install (Video card, dvd burner, Ethernet card). Then after re-install is complete - re-install each new piece 1 by one - Is that correct ?
View 7 Replies View Relateddoes anyone know of a way to hack the places bar so more than 5 shortcuts can be added ?
View 4 Replies View RelatedI added a new 250 gig ATA Seagate drive to my son's EMachine 2882. I added it as a Slave drive (setting jumper to slave and placing on the end of the parallel cable) to use for backing up purposes.Everything is fine, I think. Went into Disk Management and attempted to partition the un allocated new disk. For some strange reason, everytime I try to partition the disk it appears to be (not sure) but it appears to be creating 8 megabyte partitions? Do I have some setting in the BIOS that needs tweaking? I am not a total idiot, but I am beginning to wonder! Can anyone please get me on the right track here? XP does recognize the Seagate drive but something is screwy with the formatting process.
View 13 Replies View RelatedAfter I type a zero (0) a decimal (.) is automatically added and vice versa.
View 1 Replies View RelatedCould someone please help look to see what is making this computer so slow to respond to commands. I added RAM and it still seems busy doing something most of the time.It is my Mom's computer and I'm trying to help her with it. Just got it on high speed hoping that would help by letting the programs update in the background.
View 6 Replies View RelatedI reinstall Windows XP Home because My computer was messed up. It deleted all my files.. so on my desktop screen I don't have any Program Files Icons. BUT it still save my Files. I have my orginial files in my Documents folders and In my Program Files It has all the Programs and files that go with that program? How do I zap everything back on my desktop screen so I don't have to go Download each files as new again??? And I how do i get my Internet Favorite Links and my Notepad with my saved information in it? Yes I did try the "Start" and then program files and none of the programs are there.. BUT yet it is in my Program Hard drive C: Program files. with the Program and all it's content?
View 1 Replies View RelatedI've just bought an MP3 player and I've installed the software that is packaged with it. The program searched my HDD for all types of audio files and added them to my Library. What happened next was a complete blunder on my part: what I did was go through each file in my Library and delete those that I didn't want and keep those I did. I didn't pay any attention to what I was deleting, and I believe what I did has to do with a disk problem I'm havin'. I don't think my computer recognizes my D drive anymore (excuse me, please, I don't know much-- I mean the drive that plays DVDs/CDs). When I view My Computer, the D drive isn't displayed. Another example: when I'm in WMP and tryin' to copy tracks from a CD onto my HDD, there isn't a D drive listed to upload from.
View 2 Replies View RelatedWhen I bought my new pc with XP SP2 I added a second hard drive(FAT 32) that I'd already used for a while in my old pc, and that contains all my data, photo's, music etc. Everything worked fine, but over the past month something strange is happening. From one moment to the other Windows loses sight of that second drive. Sometimes restarting (in every possible way) helps, sometimes not. Sometimes the drive disappears when I'm saving omething to it, sometimes I can save.
View 2 Replies View RelatedFor several months I have had a problem with windows xp restarting - a stop error - caused by- according to Microsoft (when I report the error) - a device driver. the only device with new drivers that I have added is the video card. The problem has recently gotten worse - the computer now either restarts or freezes after 20 - 25 minutes (it even did this when I was operating in Safe mode). HP tech support suggested that I remove the video card and see what happens - result was the same. I suspect some type of hardware problem. Hp support receommends I do a system restore and that if the computer shuts down during the process I will know it's not the operating system
View 1 Replies View RelatedPer "My Computer", the drives are: C:= 200 gig, File: system NTSF. D:= 8.5gig (A partition on the C Drive, it contains HP_Recovery), File: system FAT32. E:= LightScribe DVD/CD Burner/Player, F:= My "Back-up" HD, 160 gig, Seagate Ultra ATA/100, File: system NTSF. G, H, I & J are available for future use.
I backed up all my files etc. from my old PC (Windows Me upgraded to XP) onto the 160 gig HD. The "Back-up" HD was the slave in my old PC. It contains Files etc. there is no Operating System on it.
After installing the "Back-up" HD in the new PC I get an "Error loading OS" message when I boot-up. If I turn off the PC, wait 60 seconds and then turn it on it loads OK and yes I can access the 2nd HD, copy files and paste them into the new 200 gig HD etc.
I added a 512mb stick and 500gb hard drive to an AMD 1.7mhz system that was running fine but just out of disk space (figured as long as the chassis was open to throw in the ram too). Now I can barely use the darn thing. Runs extremely slow. Audio and video and useless, responses are crazy - even the mouse is herky-jerky. Went into taskmanager and there is one program that seems to be using a lot of processor time but I alway have that one running even in the 'old' configuration. I can kill it and it helps a little bit but why should more resources make things worse. I have AVG running for virus checking and regularly run adaware and spybot for malware checking. Checked system settings and everything looks fine there as well - cache, VM, performance, etc. all set to normal levels (768mb by the way).
View 7 Replies View RelatedI completely reformatted my HD and reinstalled windows. I added the drivers and just a couple of aps. Now my computer is SO slow. Aps take a good 30 seconds to open as do web pages. There is the odd time where something will open quickly (seems random) but not too often. I ran Hijack this, spybot and adaware and found nothing nothing to find.
View 5 Replies View Related