Reinstall Operating System When Installing New Board
Dec 11, 2008
Is it necessary to reinstall windows when you put a new mobo in your pc? Especially when you change from an Nvidia board to an intel board. Or will reinstalling only the chipset drivers do the trick?
1) this pblm started after i did a reinstall of windows some time back. my system works fine now but for one thing. at every boot after its done post, the screen goes blank/dark/black for about 40 seconds, then a white progress bar appears at the bottom of the screen and only then does the windows logo with the blue progress bar appears. from then on its smooth sailing, a few seconds till the welcome screen and i'm in windows.2) this hasn't happen for a few weeks now. sometimes while in windows the pc reboots by itself but during post it wont recognize the hd. like nothing connected to the ide cable. fixed it by disconnecting/reconnecting the ide cable
Laptop new online so it came with Windows XP sp2 already installed. That I recall, it did not come with a disc or any included software. I've been having some major problems with my computer as of late and I'd just love to wipe the whole darn thing clean and reinstall everything, but I'm not sure if that's even an option if I don't have a disc. What other options do I have?
I have a problem:my computer is infected with a virus.My system is a Windows XP Professional 2002 SP2. I don't want the solution having me reinstall windows XP because my XP CD doesn't work and my parents won't buy one.
I had to reinstall my operating system (Windows XP Media Center), and now i don't seem to have a graphics card. i looked inside my computer and couldn't figure it out. im not really sure what to do.i had intel express family chipset before the reinstallation.
I just reinstalled XP on my laptop and I tried to connect to the internet with a cable modem and when i looked the local area connection wasnt there. I dodnt have any connection and i am using a router. I tried the Connection Wizard and tried to make a new home/small office connection but that didnt work eather.
I want to reload XP PRO, clean the haed drive and give him a fresh start, yet it tells me that I have an earlier version and will not let me install it. It says to reboot and start using my XP Pro and it still does not work. I have checked the BIOS and everything is right in it, i.e boot from CD. I for the life of me cannot format this drive so I can reload a fresh copy of XP PRO and all the updates, and then some other programs. I am pulling my hair out over this. What am I missing that I cannot format and start over,
i just had to reinstall windows xp pro service 2 and i now have to go through the logon screen when before i never did. it just went straight to my windows screen. how do i enable auto logon?
I'm having problems with my window XP opening. I have taken my hard drive out and put in an enclosure, and backed it up. Now I'm trying to determine the product key to reinstall it with the rescue disk.
How difficult is the process of uninstalling XP on my old PC and reinstalling that same copy on my new one? I want to wait until the first service pack of Vista is out before upgrading. I've heard reinstalling XP on a new PC can cause problems but I don't see how it would if it's no longer on my old PC.
Tried to reinstall xp but screen froze at 'select operating system to start'. Now I just have a blank screen with a cursor flashing in the top left side. I tried to boot by pressing F11 but cannot do so either by the cd or the hdd.
I had to reformat and reinstall Win XP and then restore from backups, some didn't work as advertised.I can't reinstall Acronis True Image because it didn't fully uninstall. There is an entry "[13:51:18 - Error]: Failed to remove "HKEY_LOCAL_MACHINESoftwareAcronis"! Windows core returned the following error: "Invalid key"" which my registry cleaner can't remove. Using regedit I tried but I got the same msg.
Hello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
Im planning a spring clean and of my hard drive including a re-installation of XP by creating a Bart PE disk,slipstreaming it with SP3, critical updates and my current drivers.At the moment my My Documents folder and sub-folders are on a completely separate HD so I shouldnt really need to touch those.I carry out regular backs of both drives to an external drive using Acronis True Image.When I re-install XP it will obviously recreate a My Documentsfolder of its own. How do I go about pointing Windows to my existing My Docs folder on the separate drive? I moved it originally by clicking on MOVE in PROPERTIES on My Docs in the START MENU, but if I use this method this time I will just end up with 2 My Docs on the second drive.
mi pc hangs always in 3x% percent i removes all devices and try again ..low format to my hdchange ramchange hd update biosreset cmoscheck temp nothing worksalways crash
Trying to use the system recover cd.to try and repair windows xp pro. I get to the part where the screen is supposed to offer repair.My screen comes up showing partitions on the drive.It also says unknown disk but it lists the c: drive with 76246 MB and two other partitions.It just gives me the option to setup windows xp on the selected item or to select a different partition or delete a partition.I'm not getting the screen shown in the sticky.When i hit enter on the large partition it warned about installing two Operating System on the drive.Afraid to go farther,hoping I can save the files on the hard drive.
I have built a computer and when i go to install windows it gives me this error message it says Error:SXS.DLL:syntax error in mainifest or policy file D:I386asms6000MSFTWINDOWSCOMMON|CONTROLS.MAN on line
I'm currently using Acer Travelmate 650. I need to reinstall the windows as i'm passing my notebook to my friend. how i reinstall my windows as i don't have a cd-rom for install.
I’m having problems with my operating system. I want to install a fresh copy of it. Can you tell me or show me step by step documentation as to how to partition my drive (or refer me to documentation as to how to do so), install a clean copy of WXP from my Dell OEM Windows XP SP1a CD into the new, empty partition, update everything necessary on it (note, again, I received the WXP SP2 CD from Microsoft by mail a few days ago), transfer any files from my current installed O.S. copy into this newly installed copy that I want to install, and then delete this current (then old, once I do this) copy of my O.S.? Are there any Microsoft documents about this? Would this be better than just reinstalling the O.S. over the one I currently have in my computer?
i have 2 HDD one with the os and the other one for data.I reformatted my data drive by deleting and re-creating partition via windows xp boot cd. Afterwards it went through the whole windows instillation thing.How can i reformat this drive without installing windows xp afterwards?
i am trying to install winxp on my wifes older computer....now it is older but it does meet all of the winxp hardware requirements for installation....3 times now it has seemed like it was going to take the installation but I keep getting different stop errors....the 3 I have gotten so far are 0x00000024; 0x000000D1; 0x0000008E .....does anyone know what is going on so i can install winxp already.
Tried to repair my xp pro but just wouldn't fix so had to do a re-over. all is well cept i have continuous run-tine errors on different pages. here is an error i got today :Error A Runtime Error has occurred.Do you wish to Debug? Line: 0 Error: Object expected,Yes/No.
Attempt to install XP Pro on a new hard drive, towards the finish I get errors cannot copy various files, although I'm trying 2 different new XP Pro CD's, and reformatted the drive after unsuccessful attempts. The CD drive has never been malfunctioned before.
Recently reinstalled Windows XP SP2 Home, due to a messed up Registry and upon reinstalling my screen resolution became 640 x 480 px, and whenever I try to change it, my computer won't let me. According to Microsoft.com, I have to install the driver for my monitor. I can easilly re-download the driver from the Dell website, but for some reason my computer won't let me go to Monitor settings. In order to install the monitor's driver I need to access this. Below is an image of the Advanced Display settings window when I open it. Note how the Monitor Properties is unclickable.
I think I need to change my operating system! I have a Compaq Armada E500 laptop, 4GB, 2.81 GB of used space, 1.18 GB of free space, running on "Windows 2000 Professional" ("Built on NT technology"). I'm having problems downloading certain softwares, it seems "Windows 2000 Professional" just doesn't let me do it. Plus, I've found there's other things I just can't do with it. I've been told Windows 98 is the best way to go for me + it'll free up some more space (you can see my laptop has very little space) + it'll let me download the softwares I need with no problem.
Why do people spend $200-$600 on a single piece of hardware (such as a graphics card, processor, or monitor), spend upward of 1 to 4 thousand for the entire hardware collection, and then pirate a copy of Windows XP Home that only costs like $100 for an OEM version if you don't even feel like shopping around for a good deal on it?I don't get it!What good is all of that hardware without any software to run it?And why to people whine about how bad Windows is, but then pirate it instead of running Linux? I mean if M$ software is so awful, then why use their software?