Attempt to install XP Pro on a new hard drive, towards the finish I get errors cannot copy various files, although I'm trying 2 different new XP Pro CD's, and reformatted the drive after unsuccessful attempts. The CD drive has never been malfunctioned before.
I'm currently using Acer Travelmate 650. I need to reinstall the windows as i'm passing my notebook to my friend. how i reinstall my windows as i don't have a cd-rom for install.
Why do people spend $200-$600 on a single piece of hardware (such as a graphics card, processor, or monitor), spend upward of 1 to 4 thousand for the entire hardware collection, and then pirate a copy of Windows XP Home that only costs like $100 for an OEM version if you don't even feel like shopping around for a good deal on it?I don't get it!What good is all of that hardware without any software to run it?And why to people whine about how bad Windows is, but then pirate it instead of running Linux? I mean if M$ software is so awful, then why use their software?
I recently had my XPS M1710(Windows XP Pro) swapped out for a M1730(VHP) and would like some assistance in getting rid of Vista and installing XP Pro onto the new system.
I need to install Windows XP on a laptop (Dell Latitude CPx H500GT) but I don't have the CD modular drive for it.How do I install XP with no built-in CD-ROM drive? The only other options I have is a ethernet PC card, one USB port and I do have a USB enclosure (for use with 3.5 hard drives or 5.25 cd/dvd drives)
i installed an operationg system (service pack 3, but if i want to copy a file either from desktop or any where,i do klick on the right side of the mouse and shose ( send to ),and i dont see hard disks among the lists of where to send to,while i have 2 hard disks installed
I’m having problems with my operating system. I want to install a fresh copy of it. Can you tell me or show me step by step documentation as to how to partition my drive (or refer me to documentation as to how to do so), install a clean copy of WXP from my Dell OEM Windows XP SP1a CD into the new, empty partition, update everything necessary on it (note, again, I received the WXP SP2 CD from Microsoft by mail a few days ago), transfer any files from my current installed O.S. copy into this newly installed copy that I want to install, and then delete this current (then old, once I do this) copy of my O.S.? Are there any Microsoft documents about this? Would this be better than just reinstalling the O.S. over the one I currently have in my computer?
I bought my mom a used computer with Windows XP. If it ever gets messed up I won't be able to reinstall Windows since the computer didn't come with any disks. Is there any way to make a backup copy of Windows XP in the event that I ever need to reinstall it for her? Also, we don't have the administrator password for the computer that was set by the previous owner.
I have been trying to clen up an old computer to give away. It is a 2002-vintage desktop with 512MB ram. I tried several times to reformat and reinstall xp, but I have only succeeded in removing the operating system and reformating both the hard drives. I have the OEM xp disk that came with it but I have tried 15 times to install xp and I can't. Is there anything I can do to fix this?
ive been trying to reinstall windows on my pc, it will do everything fine until it starts to instal, it will get to about 50% threw the devices then it wont do annything after that, ive tryed everything i can think of to undo the installation but cant get it to work, is there something if missed for it to install correctly? if not can you tell me how to undo the new installation as its useless at the moment
What would be the procedure for me to change from Windows XP to Windows 2000? Does XP have to be uninstalled or can I install 2000 without that requirement? Someone told me that I could just install 2000 and, that, in effect, would override XP. But, I don't want to goof something up so I thought I had better check with the experts here first.
Hello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
Im planning a spring clean and of my hard drive including a re-installation of XP by creating a Bart PE disk,slipstreaming it with SP3, critical updates and my current drivers.At the moment my My Documents folder and sub-folders are on a completely separate HD so I shouldnt really need to touch those.I carry out regular backs of both drives to an external drive using Acronis True Image.When I re-install XP it will obviously recreate a My Documentsfolder of its own. How do I go about pointing Windows to my existing My Docs folder on the separate drive? I moved it originally by clicking on MOVE in PROPERTIES on My Docs in the START MENU, but if I use this method this time I will just end up with 2 My Docs on the second drive.
mi pc hangs always in 3x% percent i removes all devices and try again ..low format to my hdchange ramchange hd update biosreset cmoscheck temp nothing worksalways crash
Trying to use the system recover cd.to try and repair windows xp pro. I get to the part where the screen is supposed to offer repair.My screen comes up showing partitions on the drive.It also says unknown disk but it lists the c: drive with 76246 MB and two other partitions.It just gives me the option to setup windows xp on the selected item or to select a different partition or delete a partition.I'm not getting the screen shown in the sticky.When i hit enter on the large partition it warned about installing two Operating System on the drive.Afraid to go farther,hoping I can save the files on the hard drive.
I have built a computer and when i go to install windows it gives me this error message it says Error:SXS.DLL:syntax error in mainifest or policy file D:I386asms6000MSFTWINDOWSCOMMON|CONTROLS.MAN on line
Is it necessary to reinstall windows when you put a new mobo in your pc? Especially when you change from an Nvidia board to an intel board. Or will reinstalling only the chipset drivers do the trick?
i have 2 HDD one with the os and the other one for data.I reformatted my data drive by deleting and re-creating partition via windows xp boot cd. Afterwards it went through the whole windows instillation thing.How can i reformat this drive without installing windows xp afterwards?
i am trying to install winxp on my wifes older computer....now it is older but it does meet all of the winxp hardware requirements for installation....3 times now it has seemed like it was going to take the installation but I keep getting different stop errors....the 3 I have gotten so far are 0x00000024; 0x000000D1; 0x0000008E .....does anyone know what is going on so i can install winxp already.
Tried to repair my xp pro but just wouldn't fix so had to do a re-over. all is well cept i have continuous run-tine errors on different pages. here is an error i got today :Error A Runtime Error has occurred.Do you wish to Debug? Line: 0 Error: Object expected,Yes/No.
Recently reinstalled Windows XP SP2 Home, due to a messed up Registry and upon reinstalling my screen resolution became 640 x 480 px, and whenever I try to change it, my computer won't let me. According to Microsoft.com, I have to install the driver for my monitor. I can easilly re-download the driver from the Dell website, but for some reason my computer won't let me go to Monitor settings. In order to install the monitor's driver I need to access this. Below is an image of the Advanced Display settings window when I open it. Note how the Monitor Properties is unclickable.
I think I need to change my operating system! I have a Compaq Armada E500 laptop, 4GB, 2.81 GB of used space, 1.18 GB of free space, running on "Windows 2000 Professional" ("Built on NT technology"). I'm having problems downloading certain softwares, it seems "Windows 2000 Professional" just doesn't let me do it. Plus, I've found there's other things I just can't do with it. I've been told Windows 98 is the best way to go for me + it'll free up some more space (you can see my laptop has very little space) + it'll let me download the softwares I need with no problem.
How much space should I plan to partition for a new install of Windows XP pro? My current setup has 3 partitions on an 80GB drive. My system drive is about 5GB and I keep getting the low disk space message. Is 10GB enough or too much? I install all of my software and documents to another partition.
I have xp sp2 installed on a 17 GB partition. c: properties says I have used 9.8GB and7Gb free. I have 9 folders and a few tiny files on C: and very few programs installed.If I add the sizes of 9 folders (Windows-3.09 GB Program files-1GB) I only get about 5GB.What or where might the other 4 GB be?
I have a friend who has a pentium 2 350 which is currently running on Windows 98SE...yikes!My friend has been complaining that their computer has been running slow and that pop ups are appearing everywhere. I told them that it sounds like their computer has been hijacked and that I would recommend that they format their computer and start from fresh.I want to format their computer and install a newer windows OS (perhaps windows xp) and install a couple of spyware/antivirus programs.