The Application failed to initialize properly(0xc0000006). Click on OK to terminate the application.After I click ok, I then receive the 1st error again, I click ok, receive 1st error again, I click ok, receive the 2nd error, click ok, receive the 3rd error again, click ok, receive the 4th error, click ok, receive the 5th error, click ok, receive the 1st error, click ok and then it takes me to my desktop. However after all that, my system is running slow. I am not sure what to do at this point
I get the following error evry time my Windows XP Media Center PC boots
winlogon.exe - Application Error
The instruction at "0x0101050c" referenced memory at "0x117e4000". The memory could not be "read". Click OK to terminate the program Click CANCEL to debug the program When I click either the system reboots and I'm stuck here. I cannot get it to boot in safe mode but I can boot to a DOS prompt in the Microsoft Windows Recovery console.
i cannot go past starting windows screen after that it gives me a message: winlogon.exe application error instruction a "0x00dafcf0" reference memory at "0x00dafcf0" memory could not be written.then it turns to blue screen:Stop:c000021a (fatal error)windows logon process system process terminate unexpectedley with status of 0xc0000005 system has been shut down at the time this happened i was downloading panda anti-virus and did not delete my anti-virus program and had also downloaded a2hijack program that was running at the time
I uninstalled Windows Defender ages ago as soon as I realized that it had just been hogging the CPU. For some reason, an error message pops up on startup: "The application failed to initialize: 0x800106ba. The problem caused the Windows Defender service to stop. For information on how to manually start a service, see the Help and Support center."
receiving an error message box when I close any site The error, It says below debug then send report and don't send report. Sometimes this happens but rarely when I am surfing the site.
I am helping a friend with her PC, she is recieving an error message reading "0x8024502D" We have tried every thing we can get our hands on to get rid of it. I have read that it has something to do with Windows XP's update program and it locks you out of most web sites requiring secure traffic. Are there any hopes of recovery? In the time we have spent today we could have reloaded XP!
i can recieve sound on music,movies,etc.. cannot hear sound effects when opening a program,emptying trash,maximizing,minimizing,etc. using oem dell home xp version of windows. when i enter sounds in the control panel, i can hear the selected sound when i test it, but the sounds do not occur when the events are executed
I have an infection that I haven't been able to rid on my own. I am receiving popups on the lower right claiming to be from the Windows Security Center with titles like:
Alert! You are receiving Spyware! Warning! Your security and privacy are at risk!
The window has the name "Project1" in the task manager, and it has overridden my ability to end processes in the task manager.
Repeatedly receiving access violation error and kernal32 dll errors. Als0 unable to open any help files and computer hangs frequently. There are periods on nonresponsiveness with a sudden return to commands. I am running AVG 7.5 Suite, Counterspy, Threatfire, and do frequent scans with other antivirus and malware tools.
My problem is.when receiving an attachment with E mail Outlook Express,at times I cannot open it.A message comes up.create an association in Folder Options. Apparently i need to do this to be able to open the attachment.I am using Windows XP system.Can any one help please and tell me what to do.
Im getting this message when trying to restart windows XP. i get it even when i try to enter into safe mode. If I click on either option it restarts the machine. I cant even get access to the safe mode of windows
"Application error: Winlogon.exe. Click ok to close or cancel to debug."
I get INST32.EXE Application Error Box with Message Application failed to intialize (0xc0000006) Click Ok to terminate . push OK twice to remove box. I am trying to load my Printmaster Platinum 7.0 or 8.0 and neighter will load. I have been trying to get this fixed for over 3 weeks. Nothing I have found will work.
The Instruction at "0x75606eb5" referenced at "0x00000008". The memory could not be "read".Click OK to terminate the program.I keep getting these messages all the time but the numbers keep changing. it started when i my sister started typing something. the day before she had also spent all night typing. now i get that message for everything.Don't know what to do. I tryed disabling automatic updates and then updating it manually on website but when try i get redirected to Google.
After using Windows Explorer to view files and folders I get the following error message:Proxy Desktop - explorer.exe - Application error.The instruction 0x01f24213 referenced memory at 0x018dad58. The memory could not be "read". Click OK to terminate the program.I am using Win XP Home Ed with Service Pack 2 installed on a Dell Dimension 8200 with 512 MB memory. What is the simplest course for recovering from this problem.The program seems to work anyway.
Explorer doesn't load it just stops and when i close it i get this message.The instruction at "0x1001cd11" referenced memory at "0x1001cd11". The memory could not be "read".
I'm getting this error massage for a few days. It says:The instruction at "0x7c9111de" referenced memory at "0x00720065".The memory could not be "read".
Good morning, I have a couple of problems and I can't figure out how to get my computer back to where it used to be. I think it has something to do with updating windows. I get messages everytime I try to open a photo or a file. One message is Explorer EXE-Application Error, The instruction of ox600470a4 referenced memory at ox600470a4. The memory could not be written. Click on ok to terminate the program, click on cancel to debug the program. I clicked on debug and the program I got a message about Dr. Watson trying to communicate with ? and I clicked ok. Then the photo closed and all the icons disappeared and the reappeared. When I opened the same photo again, I got the following message. Data Execution Prevention-Microsoft Windows to help protect your computer, Windows has closed this program and also Windows Explorer has encountered a problem and needs to close, etc. Again the program shuts down. Basically, I can't open anything without the error messages. I can't copy cd's either as I have in the past with Nero. The program starts and then I get a read message or the cd just will not copy. Is there a way that I can do a restore and have my computer back to where it was 3 weeks ago? I could do that with my old computer Windows 98se. I have a HP Media M7060n now and I have XP home edition. Up to now I have had no problems. This computer is very different from my old one and I have no clue how I would do a restore. I just want a restore from 3 weeks ago, not a complete restore. I think the problem has to do with a windows update. I think I did one just before these problems occured. I lost my virus protection and had to reinstall it. I thought maybe that was the problem so I uninstalled it, but that wasn't it. So..here I am very frustrated. I know this post is long and I apologize. Thank you~Liz
I just got hit by a virus, it's all gone now. But one thing, it still messed up rundll32.exe and userinit. I cannot log in without, having to press control+ alt+delete, file, newtask, explorer.exe
After having the comp for a week or so (got it from a friend for cheap, in perfect condition) any time i try opening a program such as Word, the Open With screens pops up, and i have to find the program manually and open it. when try to open anything in the control panal, such as add/remove programs, an error pops up that reads:
C:WINDOWSsystem32 undll32.exe Application not found
I just bought a HP Laptop Computer and it has installed in it, Works for Windows. When I try to run the word processor part it come up with this message:
"The Application Failed to start because LTKRN13N.dll was not found. Re-installing the application may fix the problem."I click [ok] and the window closes. Then another windows opens and says this: Windows cannot access one or more required files. The files may have been renamed, deleated or moved. Try re-installing Works and then starting the program again.
Error from any application that tries to access the Internet. This includes IE, the Live Messenger, Yahoo Messenger, Limeware, uTorrent, any application, the moment I try to access the Interent with it. For example, I'll get the error the moment I try to log on with MSN, but not when I initially launch the messenger. However, if I don't actually click the Don't Send button, the applications work just fine...The problem has started when I accidently turned off the PC without a proper shut down.I don't actually get the errors in Safe Mode, but then again, I have no internet connection there.
This is a past post that someone else posted but I'm having the same problem and I did not understand the solution. Here is what he put:"Windows won't start up on my badly-infected WinXP PIV. It gets past the logging on to windows prompt and then this error message comes up userinit.exe application error (0xc0000005) and Windows then fails to load completely. This also occurs in safe mode and I haven't been able to bypass Windows and boot directly to DOS by using the F8 key on startup." This is exactl my issue except I haven't tried to go to Dos mode b/c I didn't know how.This was his reply..."See if this helps:Restore WinlogonUserinit Line #263 right side http://www.kellys-korner-xp.com/xp_tweaks.htm
I have an accounting program in which I have data files for each year of my business. These have been successfully backed up for years on CD and now JumpDrive, and stored on the desktop with a shortcut for easy access. I downloaded and installed SP2. Now when trying to open a file, I get the message C:XXXXXXXXX is not a valid Win32 application. It always was before so what changed?I cannot back up my current files because that is the name I've always used. The computer doesn't recognize the name as valid so I have no security.
This came out after i open my windows and logged in. I tried opening my task manager and it won't come out, i waited like 1 hr juts to see how will this help but it did not help anything, it's just this two problems that shows up everytime even if i press "okay" button it will still shows up. all of that i tried but the same problem shows up, " drwtsn32. exe - application error" and "dwwin.exe - application error ". i can't access anything in my programs coz even the "start" button is not shown. i tried using another account but the same problem shows up.
I tried to dowload some codecs to watch a movie (without success), my computer is running very badly.It always freezes and I have to reboot or it responds very very slowly. The only hint I have is a Windows type error message which pops-up at almost each boot kdyow.exe - Application Error exception Breakpoint A breakpoint has been reached.(0x80000003) occured in the application at location 0x00411ccc.Whether I choose either one of the option, it always come back and my computer is having a very hard time running. Did I catch a virus of some sort ? I searched the Internet and the breakpoint thing seems to be frequent, as well as the 0x80000003 but nothing about the 0x00411ccc?
Every time I use my laptop with my wireless connection I get rasautou.exe application error warnings everytime I try and move web pages. I understand it has something to do with an autodialer,
