I have a computer with xp on it and i need to no how to re-format my computer i was told i need a boot disk from my k8 triton motherboard disk and if i do is there way of finding out how to make one and if not how do i get one so i can re-format.
View 20 Replies
I want to format my hard drive on my dell laptop. when inserting the restore disk I get this message "Windows xp software on your computer is newer than the one on this Disk. Cannot format disk"
View 8 Replies View RelatedMy son couldn't find the original XP cd that came with his Systemax, so we bought a new XP Pro OS and installed it. While I was working on the connectivity issue, we found the original XP cd. Since I had not activated the XP Pro, I'd like to switch to the original XP and save the new one for a future laptop.
But, when I went to install the original, I didn't seem to have much of a choice because it was about to install the original on the same partition as the XP Pro . . . so I quit, and tried to format the HDD again, but since I was using the Command Prompt, MS said that the disk was already in use so that I couldn't format it.
I am trying to format my computer. I have the cd and cd key to do it but for some reason my dvd drive dos'nt want to read any disk. So I can't format it. I think that I have a virus that is doing this to my dvd drive. So can I format a different way besides the disk.
View 6 Replies View RelatedI went to format my pc, using the recovery bootdisk i have.Im on XP.I put the disk in and typed in dos, format c:. everything seemed to be goin a ok and then it asked for teh volume label, i pressed enter then rebooted my pc with the disk in again. I then typed format c: again as i thought the origional format didnt happen. I then get a message saying that this disk is not able to format. the bootdisk also doesnt seem to load correctly now either.
View 14 Replies View RelatedTrying to install XP Pro and I need to fdisk. Should I use a Win98 or 98se boot disk does it matter? I know I can use the CD to do it all but lets say I wasn't and wanted to clean up the hard disk from a fresh perspective would it matter which version of boot disk I used?
View 8 Replies View RelatedI tried reformatting my pc for several times now but I can't reformat it.It just goes up to the stage where I have to pick the drive to format but there are no drives to choose from. The drives doesn't show and I can't pick the C drive to format or see any other drive.I don't have anything listed. My box just says Unknown Disk (There is no disk in this drive.) It just stops there and I can't proceed.
View 10 Replies View RelatedI decided to do a complete format with my windows disk, and so I booted from it and I have come upon the selection screen which asks which partition it wants to install under. There was an E: partition, which I removed.
How do you format a new, fresh, hard drive to NTFS? Without using an XP system or installation disk? I know for old stuff you can use fdisk and format in DOS.
View 3 Replies View RelatedI have Microsoft Windows XP Home Edition Service Pack 3 (all data are taken from Magical Jelly Bean) which is Installed from 'OEM' media in a PC Info QuestXPAND. I have the Info Quest recovery CD-ROM for windows XP Home Edition SP2 and I want to format my hard disk and reinstall windows. The problem is that I scratched the sticker which brought the product key on in a crisis of complete stupidity. I do not have a product key. If I format the disk will the recovery-cd-rom ask for a product key; If so, can I give the OEM product key that is given by Magical Jelly Bean and I'm guessing is different from the key that was on the sticker?
View 3 Replies View RelatedHow do I access the C prompt to format a crashed hard disk with windows XP home SP2 when even safe mode doesn't respond.
View 6 Replies View RelatedLaptop has become heavily virus infected and needs to be formatted. I do not have original operating system disk. It is out of warranty also. It does not boot up always. How can I format it in order to reinstall windows xp.
View 8 Replies View RelatedI want to remove windows xp home off my laptop, I had to install a new hard drive and when I installed windows xp I found out I didn't have the drivers disk so nothing works. I went to Dell site to get drivers and there are hundreds of them, the ones I did download wont work. So I want to reformat my harddrive and go back to ME. but I can't. What can I use to FORMAT this hard drive?
View 5 Replies View RelatedOkay, i have posted thios at heaps of forums and they wont give me any useful info. So now its your turn :P I have windows xp cd. But it will not boot up. The bios is correct, and the cd is in there etc. It says press any key to boot, and i do.It detects some stuff then restarts and loads into my desktop Doesnt do anything. I have tried another version of windows xp pro. Same thing.I want to reformat, i need to reformat. This dialer is costing me money.
View 7 Replies View RelatedI was going to post this on the software forum, but since there seems to be no problem with the software (WinZip) I decided to place it in here.Everytime I attempt to open my 'Unzipped' folder in My Documents (the folder every file extracted from Zip files [using WinZip] goes to on my computer) it asks me to format my C: drive. I tried to format it, and I got this error: Windows cannot format this drive. Quit any disk utilities or any other programs that are using this drive, and make sure that no window is displaying the contents of this drive. Then try formatting again.I closed all my open windows and such and tried again. I still get the same error. I really don't want to format my disks to get into the Unzipped folder (which would be pointless anyway, since formatting erases all your files, and those are what I'm trying to get back) and nothing else seems to be working.
On mouseover Windows tells me the folder is empty, and when I view its properties it's 'read-only', no matter how many times I try and keep it from being so. I've tried deleting the folder (always getting the message that the directory is NOT empty), moving the folder into another folder, and uninstalling WinZip. NONE of this works, and I really want my files back. Is there any way you can help?
I need to format my harddrive and re-install XP pro, but I don't know how to do it, do someone out there know where to find an easy guide to boot from CD. Cause it would be nice with a print so I can format my computer step by step. I'm not so brainy when dealing with BIOS.
View 3 Replies View RelatedI had XP pro loaded on my boot partition and wanted to get rid of it. I deleted the entire volume D:, but my boot loader menu still lists that OS. Of course it can't boot to it any more, but I don't want to see in the menu at startup. What files are left over from that OS instance that I need to remove?
View 5 Replies View RelatedI have installed 2 different operating systems (xp and vista) on my hard drive on seperate partitions without flagging 1 of them to boot (aka it doesnt boot at all.) I want to completely format the hole thing and just put xp on the 1 hard drive with no partitions.
My problem is that my computers CD drive has broken and it does not have a floppy drive, I want to know if theres any way i can boot a program from a USB flash drive to completely format both partitions so i can install xp (I already know how to boot xp off a USB flash drive.
I am trying to format my PC as it has been affected by Spyware and malware.
I set CD-Rom as boot option but when PC reboots it do not start formatting irrespective of presence or absence of CD in CD-Rom. Similar thing also happened when I set this option for Floppy Drive. How Can I resolve this problem.
I have formatted PC once before the CD I have with me. But now I want to make new bootable CD. Can you please suggest me the procedure and resources to get (software/program) to be included in CD from Internet (freeware program). So that the CD will format the drive cleanly and clearly. It should format C (program file drive) and other drive like D, E F.
I tried to partition my hardrive but did the wrong one nad deleted my bootup, so when i try it jsut goes to the (safe mode, last good config ect) screen. so tied to format and got up to 40% It took a while to get to format because said invalid drive specification, and also bad command. Then tried to install windows 98, adn got to blue screen where it goes to format, then says insert disk, b ut disk was inserted.
View 1 Replies View RelatedGetting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
View 13 Replies View RelatedMy computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
View 9 Replies View RelatedWhat can I possibly do to solve this problem? I have Windows XP and everywhere.
View 1 Replies View RelatedDisk boot insert system disk and press enter comes what do i do?
View 2 Replies View RelatedHey, have built a new pc, but am using the same hd as my old one, when booting i get a "disk boot failure insert system disk and press enter" however when i press enter it boots up, not really a big problem just annoying and i wonderd if anyone could help get rid of it.
View 4 Replies View RelatedI have 2 hdds on my system and windows xp crashed and would not recover from main drive so in an effort to save my data I loaded windows on secondary drive which worked, and gave me access to the old drive, all files were in tact and so I tryed to use windows recovery on winXP cd to no avail. When I try to boot from the original drive I get "boot disk failure, insert system disk and press enter" The thing that makes no sense is that I have rewritten the boot sector and mbr I also used the automatic recovery feature on the windows install disk and all looked like it went fine but still no boot
View 2 Replies View Relatedfirst i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies View RelatedI Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies View RelatedI need to get my HDD reformatted with the help of a paid technician.Couple of weeks ago he used the quick format method & asked him if that would make any difference & he said really not.I have the doubts though. I kind of wonder why would Windows then give a choice if there really wasn’t any difference?
View 12 Replies View RelatedI have just recently gotten a new computer which came with Vista. Previously what I have done with any new operating system I got was installed it into my old computer. However, I came to find out you can only have one computer assigned to each cd, unless I wanna buy another one, which is unecessary. I wanted to get rid of Vista and return to XP but the XP disc would not install because of multiple errors, such as missing ntldr.
View 14 Replies View Relatedbecause mine won't boot. I get the message: "Windows didn't start because of a computer disk hardware configuration problem. Could not read the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your reference manuals for additional information." Well, that sort of thing is beyond me. But first, my system and how I got into this mess:
Trying to get rid of the screen that prompts you on boot-up to select an OS and counts down the seconds, I went from My Computer>Properties>Advanced and unchecked the first box, the one that has a place to the right where you say how many seconds to display the OS choice. I had changed that choice to "0" many times, but eventually the choice screen always came back, so I got the idea of unchecking the whole box. Then--I forget exactly which part of Properties this was in--I found the two OSs listed. They were the same, except that the one that was selected had a few words after it that began with "No"--maybe "No selection"? (This problem of having to make a choice on boot-up started when the computer was new and something went wrong and a Dell technician had me reinstall the OS.) I thought maybe I could get rid of the annoyance by selecting the other OS, and did it.....
