I hope somebody can help me, although I suspect the PC has breathed it's last. On starting up, it hangs and won't go any further. I get the system information screen, then it just stops and the light doesn't flicker at all. I don't get any beeps either which I suspect is not a good sign. Does anybody have any suggestions for what I might do next? The PC is running (or not as the case may be) Windows
View 8 Replies
I am running XP Pro and have two accounts on my computer. Last night when my wife signed in on her account (I was previously signed in) she noticed a PONG sound which repeated itself about every five seconds. She doesn't remember exactly when it started but she thinks it started after she signed in and before starting any applications. I couldn't locate a source so I turned off her computer hoping whatever was causing it would cease and desist.No such luck. The same thing happed again tonight. I signed on first with no problem, but shortly after she signed on to her account the ponging started again. This time I did a restart and signed on to her account first. Great! No pong sound! But as soon as I signed into my own account it started again. In fact it is happening right now as I write this. Can you hear it? I am running ProcessGuard and RegDefend, along with a slew of antispyware. Nothing has come up, and my computer seems to be running fine otherwise. Anyone have any ideas what is causing this? I have never heard of this before (pun intended).
View 14 Replies View RelatedI'm running a 3 year old version of XP pro and it has gotten progressively slower booting up. Seems like about two to three minutes or so ( I should time it). I've run msconfig and there doesn't seem to be anything too obvious and I don't want to screw with things I'm not sure of as well. Also, when launching Outlook Express ,any browser and Word are really slow also. Excel is fine. Seems really odd. I've run antivirus, antispyware, defrag all to no avail
View 9 Replies View RelatedHas anyone had a problem with a pop-up using the above name and freezing your computer? Can anyone tell me if this is a legit Microsoft product and website or not?
View 11 Replies View RelatedOn my computer are installed (besides the XP firewall), MS AntiSpyware Beta 1, AVG7.0.308 and LavaSoft Adaware 6. Do I need all three, or would AntiSpyware do the job alone?
View 8 Replies View RelatedJust upgraded to the new beta version of Microsoft Antispyware that was released in June 2005.It keeps downloading and installing the same definitions, and reports that the new definitions are installed. When I click on updates, it does the same over and over again. I don't believe the new definitions are actually being installed. Is anybody else having the same problem?I uninstalled and reinstalled the MS Antispyware software and
the same problem remains
I have a glitch and can't find an email for support or a newsgroup that I can find help at. Anyone know where I should look?
View 7 Replies View RelatedIhave windows xp pro and it I think this all happened when i installed an antispyware program it asked me to restart my computer i did and i hasnt worked since itll get to the "windows is starting up" screen then it goes black and starts all over again ive tried every option in f8 same thing every single time.I also dont have a windows cd to reinstall is there anything i can do?
View 2 Replies View Relatedmy web search is trying to install on my computer but microsoft antispyware is popping up asking if i will allow it or remove it i click remove then when i restart it keeps coming back i got 3 xp usernames and it only comes up on 2of them and if i ran hjt will it matter what username i run it on??Here is a description that pops up with mas spyware alert.
View 14 Replies View Relatedusing win xp IE6 w/ sp 2 running microsoft anti spyware .. It popped up saying it was moving my favorites to a different shell folder. I was not doing anything so I took it as a spyware ,so I block it ....Bad move .now when I click favorites I get nothing. I found it it microsoft antispyware events...( has decided to prevent a change to the user's defined shell folders from Favorites to %USERPROFILE%Favorites.)but it shows no way to unblock it or change
View 1 Replies View RelatedI am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies View Relatedfirst i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies View RelatedHow can I Reboot and select proper boot device or insert boot media wnidows xp without cd.It is possible.
View 1 Replies View RelatedI Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies View RelatedI have a Windows XP Professional Edition and i incurred a spyware virus on my PC, so i made a dumb decision by running MSCONFIG and changing my SAFEBOOT option, I did this because previously I couldn't even get into Safe Mode, it would load the files on the screen.
View 1 Replies View RelatedI accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
View 5 Replies View RelatedRecently I was playing a game when my computer froze up, when I restarted it, it froze every time on the Windows XP bootscreen. It boots fine in Safe mode with networking. (I'm typing this post on this computer)
View 2 Replies View RelatedI have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies View RelatedI"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done:
1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%)
2)Removing all connected Componets and rebooted, same problem.
3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....
On boot sequence, PC hangs on Windows boot screen - with the good old progress bar churning along for eternity. It just stays there. It is possible to boot into safe mode, safe mode with networking, etc. but never boots up normally. 'Last Known Good..." does not help at all.
I have tried 'repairing' XP using the recovery console (deleting the boot.ini file, then BOOTCFG /REBUILD and then FIXBOOT) to no avail. Do not know where in the boot process it is getting hung up and not totally sure how to determine that.Using Windows XP Media Center Edition with SP2. Plenty of RAM and disk space.
Had this problem once in the past and it seemed to self correct after about 50 reboots.
Does this sound like a re-install of XP is required or are there any other options that might work?
when I edited my boot menu I left off the NoExcute=OptIn at the end of the boot menu line to load my system and was wondering if I can add this now without messing everything up ? I just found out what this option does and looks to me like a have to option. This is on XP Pro.
View 14 Replies View Relatedi have ONE hard drive with partitions. I had a really bad setup first, I had 1 partition with 3 windows installs on it, folders like WINDOWS, WINPRO, WINN, I never took the time to delete them or whatever, and I was using winpro as my main OS. When I was running the above setup, when I boot up it would ask me: Select what OS to load Windows Pro, Windows Home, Windows Home
I decieded to install Windows 7 Ultimate 64 bit, worked flawlessy, but I wanted to go back to windows xp pro 64 bit. So I made a new partition and installed windows XP pro 64 bit onto it. when I tried installing windows xp with my CD, the first part would work fine, but then when it restarted to continue the setup, it would load my MOBO logo and then after, it would just show a blinking underscore "_" on the top left corner, and nothing else.
I managed to install a fresh windows xp from my USB flash drive, but when booting up normally it still does not let me select what OS to log on to, it just shows the blinking underscore in the top left after the MOBO logo passes, I actually have to boot by USB drive to boot this fresh install of windows. I think something is wrong with my boot loader, but have no idea how to fix it.
hey anyone remember that boot disc that had everything and it also had a mouse function in it? it was like boot magic or something i cant really remember. I only remember it had 2 versions one was the floppy which was free and the other you had to pay for the cd version
View 3 Replies View RelatedI have a HP ze5568cl laptop (Windows XP SP2). For a few years we've had trouble with the power connector. We've just wiggled the power cable to keep it connected and lived with the problem. It also gets very hot and the fan runs constantly. Yesterday when I powered it on there was no power, absolutely nothing. My husband has some electronic knowledge so we took the laptop apart and he soldered the loose part of the power connector. While he was doing that I cleaned the fan (couldn't believe how much dust was in there.When we plugged in the power cable the orange light came on so we were excited. When we powered it on all the keyboard lights lit up so we thought we had fixed the problem but.that's all it did. It went no further except that the fan kicked on.There is a clicking noise coming from the cd drive about every second with the green light flashing. I suppose it is checking to see if there is a bootable cd in the cd drive. I have attempted to change the boot order by holding F1, then F2 but it still continues to try to read the cd drive. I can't get to the screen that will allow me to change the boot order.
I also put the OS disk in the cd drive, hoping that it would start with the disk but it just clicks. Hubby removed the cover of the cd drive and I could see that the cd is spinning.There were no problems with this laptop prior to the power problem. It was really working very well especially considering the age of it.
The information in my sig is not for the computer with the problem. It's actually for an old computer which my son now has at college.
During System startup, the system always halts at "Strike F1 to retry boot, F2 for setup utility". The only way I can manage to boot to Windows is by selecting "Boot to utility partition" from the Boot Device Menu or if there is a Windows XP installation CD in the cd-rom drive. When I boot this way, everything works fine .This behavior started when I performed a fresh install of XP Professional (XP Home came with the system). The problem did not start immediately after the installation; I was able to install some drivers and reboot a couple times (maybe twice) before it happened. When I installed the display driver (from Dell) and rebooted, it went to the "Strike F1. " screen. I have since tried another fresh installation of XP Home (the original OS) and the problem is still occuring. This time it occurs immediately after the installation; No drivers have been installed at this point.
View 16 Replies View RelatedI cloned a hard drive which had Windows XP on it (the hard drive was going
out) and the new hard drive would not boot unless I booted first to a floippy with boot.ini, ntldr, and ntdetect.com. Have tried recovery console and everything else I can think of, but the system WILL NOT boot to the hard drive. I checked the boot.ini file for improper boot, but everything looks The old hard drive had two partitions on it, but the hidden partition was corrupt so I deleted it. I changed the boot.ini file settings accordingly.
When I boot WinXP it goes to the screen that asks you to select which use to log in as. I am the only user on my PC. Is there a way to get rid of that so Windows will just boot up automatically?
View 1 Replies View RelatedI bought a computer for my wife and kids. Well months go by and my wife tries to install something and notices that the MAIN drive is H: not C:
I figured that it was weird but no big deal. Well I purchased a printer for her and while trying to install the software it was giving me a "Windows - No Disk in Drive" error.
I did some research and spoke to HP tech support and they suggested that I search the web for a way to change the drive letters from H: (current hard drive) to C: (supposed to be default drive)
I have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
a while ago my computer failed to boot repeatedly and I took it to the repair man who got it going but when I first switch it on I get the message invalide boot.ini file - booting from c and what has happened to create this problem and can I restore my PC to boot from the original file
View 1 Replies View Related
