Onboard Network Cannot Start (Code 10)
May 28, 2009
After a fresh installation of XP the onboard network card is no longer working with the error message "This device cannot start (Code 10)". I've changed no parts, same process on installation, bios settings are fine, formatted and re-installed to the same error so I was hoping somebody could help me find out what the problem is.I'm using the Gigabyte EP41-UD3L which has the Realtek RTL8168D(P)/8111D(P) as the onboard NIC running Windows XP Pro SP2. I just used the motherboard installation CD to install it initially as I did on the previous install and have also tried new drivers but had no luck. I've never run into this Code 10 error before so I'm not sure where to go from here and any help will be appreciated.The Windows knowledge base isn't much help either as it's explanations for code 10 are.If the device has a FailReasonString value in its hardware key, that string is displayed as the error message. The driver or enumerator puts this registry string value there. If there is no FailReasonString in the hardware key,
View 3 Replies
ADVERTISEMENT
Apr 20, 2004
I have an Intel Network card in a fairly modern computer running Windows XP SP1. Unitil I uninstalled a VPN client I have had no trouble with it. However, after the uninstall, Win XP displays a yellow icon with an exclamation mark for the network card in the device manager and the info says "Code 31 Could not load the drivers for this device".I have tried uninstalling the network adapter (in order to be able to re-install it) but Win XP tells me that it "Failed to uninstall the device. The device may be required to boot up the computer".I have also tried upgrading the drivers for the adapter but the problem prevails.My guess is that the registry somewhere links my network card with a virtual driver that the VPN client used.
View 7 Replies
View Related
Jul 14, 2005
Every so often, when I start my computer, the graphics controller does not register correctly and my computer loads some default monitor controller and gives this error that's in the Subject heading. The font turns huge and annoying. I've reloaded, updated, deleted, changed, etc. to the graphics controller. Nothing cures it, except, I was able to do a restore and get it to load correctly. Sometimes it would take a couple of times to do this. Right now, it's on it's 5th time and I'm getting annoyed. It's not working. Does anyone know what I'm talking about?
View 3 Replies
View Related
Aug 8, 2005
I get the mj view error code at start up.I also cannot shut down my computer(i believe the 2 are related) I have to do it manually so I just hibernate.Information was given to me that it could be the ebates moneymaker program installed.I checked for that and do not have it but i do have i give shopping window.Well, I went to remove this program and i cannot.The error code comes back everytime i click "remove"I also successfully removed 2 other unwanted programs so it seems that this program could be the problem.How can I get rid of the error message and this program? Do I have to contact the site itself?I have contacted H&P(4 days worth of computer emails)and they had me all over this computer with no results.
View 9 Replies
View Related
Oct 2, 2009
where can find a VGA 16-64mb onboard driver? i have an intel celeron 326
Maindboard PCCHIP model P21G
Graphic interface
AGP Version 3.0
View 3 Replies
View Related
Feb 13, 2006
Bought a computer today and the guy said it has onboard sound, it says no driver installed but i dont know how to find out what the sound part is called to download driver, it just says other devices, multi media sound controller. Says motherboard is ACPI uniprocesser PC. I have speakers connected in the right connection.
View 14 Replies
View Related
Sep 18, 2010
My onboard Audio is Realtek ALC 662 on ASUS P5S-MX SE motherboard. The output is working but the inputs (Mic and Line In) are not working. What could be the problem
View 6 Replies
View Related
Oct 1, 2005
I have an AMD 2.1 athlon, i try and re-install my C-MEDIA AC97 Audio Device, i dont have the CD and i dont know how to fix this
View 1 Replies
View Related
Jul 21, 2005
I've been using a Buslink 40G disk-to-go for about 2 years and love it. Today I plugged it into the USB port and the drive did not display. I've searched forums half the night since this drive contains financial data that hasn't been backed up for a month (yes, bad practice, I know) and I need to get it working. I've uninstalled, reinstalled, updated drivers, removed and reinstalled drivers, rolled back drivers and tried everything short of bios changes I've seen recommended.
View 1 Replies
View Related
Mar 19, 2010
yellow ! on wan miniport ATW #2, can not start (code 10) tried uninstall & reinstall didn't work.
View 1 Replies
View Related
May 30, 2010
During the day, my internet connection died, actually, my NIC did sort of got error 10.I tried to uninstall and re-install it, and it seems to go back but then I get the error code 10.I installed a new Belkin USB NIC and it installed fine but also returns error code 10. I installed a Hawking USB NIC and it installed Ok, but returns error 10. I installed an old 802.11b SohoWare PCI card, and it installs fine, but returns error 10. I installed a Marvell Yukon 88E8052 PCI-E ASF Gigabit Ethernet Controller and it installed fine, just still get the error 10. I un-installed each NIC that didn't work and re-booted before installing the next.This all sounds like a virus that can attack any network device, as any form of network device fails on error 10.If I didn't have a few computers laying around,I couldn't make this post.I also checked all services between the computers, networking settings, group policies, BIOS settings, etc. to look for something different on the bum machine, but nothing is obvious that caused the one machine to allow a NIC to be installed, but then cannot be used. (I'm running XP-Pro, SP2)
View 6 Replies
View Related
Feb 28, 2008
I took the laptop home and tried to set it up on my home network. It had mapped network drives and the login still came up under the company domain. In the System settings, I changed it from being a "Computer primarily used in an office or work environment" to a "Computer primarily used in a home office environment". Now when it starts up, the domain is gone and I can't log in to the computer. It was under his work username and password, and it NO LONGER ACCEPTS THE PASSWORD because it is no longer logging in under a domain!
View 13 Replies
View Related
Oct 6, 2008
I recently reinstalled Xp after formatting the hdd, since I was giving a friend in need this computer. Everything went smooth and I left the computer in her possession. A few weeks later I was visiting her and was using the computer when I noticed there was no sound, where there had previously been sound. Upon opening sounds properties box I found a message stating that there was no audio device installed.I opened the device mgr and there was a yellow exclamation mark under "video controller" which was under "display." After doing some research, I came to the conclusion that the chipset driver needed updated or re-installed.
View 1 Replies
View Related
Apr 21, 2010
i was prompted to restart my dell machine running windows xp pro at work this morning by mcafee. when i did so it started up with no task bar/start button. program icons were displayed, and programs would load when icons were clicked on. however i soon noticed that i could not cut and paste in illustrator. i cannot even cut and paste in any program, and cannot drag documents from one location to another.my network is no longer available either, including internet.
View 4 Replies
View Related
Mar 5, 2005
my home network might have a virus, programs start up and suddenly close/disappear. On one of the computers an error comes up and says that windows is shutting down(lass.exe file), then it shuts down and reboots. My anti-virus software can't detect nothing. I downloaded the sasser fix and it doesn't detect anything.
View 4 Replies
View Related
Sep 27, 2007
i set up network setup wizard which led to csnw show in the control panel moreover now the way i log in and log off has also changed and when i start my comp it asks for a password.when i press ctrl alt and delete together instead og task manager opening a window security sumthing opens up i want to restore my log in and log off to normal state and delete the csnw **** and restore the task manager.
View 1 Replies
View Related
Jul 19, 2005
Reinstalling a sound driver for onboard sound from a pre-packaged XP, I've tried for days to locate my driver with no success.
View 1 Replies
View Related
Jan 26, 2010
I want to install a video card to my pc but I want to keep onboard video active so I can run two monitors.
View 1 Replies
View Related
Apr 11, 2007
This started last night, the only thing that I did that was out of the ordinary was ran Avast's thourough scan fully, but even after that my sound worked, so it didnt delete the driver to my knowlege, but when I do a dxdiag and look at my audio, it doesn't exist, there is no sound card installed, and allI use is my DFI Lan Party UT RDX200 CF-DR mother boards on board sound. I tried installing the driver again fom DFI and to no success, now when I went to install the drive again, I got an error saying that this device isnt approved by Windows. Could windows be preventing my audio card from working?
View 13 Replies
View Related
Mar 8, 2006
I have Windows XP Sp2 whe i try to chanhe ip in "Local Area Connection" i got following message:" Network Connetion Folder was unable to retrive the list of network Adapters":i checked "Services" .Ok working fine then what 's the problem??
View 1 Replies
View Related
Nov 7, 2006
I try to run network set up wizard but it wont find my network device.It finds my network card but i installed a wireless card. It wont find that. Its a linksys and I am using the linksys software to run it.
View 7 Replies
View Related
Mar 15, 2008
I have a gateway 6520 gz laptop with IE6 and XPHE, I 'm on a network with two computers and use NETWORK MAGIC for the network, when I turn the laptop on it wants to display {the page cannot be displayed} instead of going online! Then NETWORK MAGIC pops-up and says {YOU ARE NOW CONNECTED} then I have to manually turn on IE6 button to go online, almost like the page {the page cannot be displayed} wants to come up first instead of the connection?
View 14 Replies
View Related
Oct 13, 2009
I need to have network drive on my Windows XP computer. In order for a software to work, there needs to exist a network drive, named N, existing on my PC. Since there's not a second PC to link to, what I did was to created a directory named est on the same PC , share it out, and then, map a network drive, named N, to it. When my PC has an Ethernet cable connected to a switch, Windows XP will see that N drive (existing on the same PC). The moment I disconnect that Ethernet cable from the switch, the N drive is gone. Is there a way to have a mapped network drive on XP (as mentioned above), without the need to have a network cable connecting that PC to a switch?
View 3 Replies
View Related
Feb 2, 2006
i have a problem with my network folder.It seems that I can't see my existing network connections in the folder! I first noticed this when i click on my dial-up connection the connection window won't come up.When i open the network connections folder in the control panel, an error message comes up with this message:The Network Connections Folder was unable to retrieve the lsit of Network adapters on your machine. Please make sure that the Network Connections service is enabled and running.
View 6 Replies
View Related
Sep 16, 2005
My network adapter does not appear in Device Manager, until I "Show hidden devices". And then it appears as a "Realtek RTL8139 Family PCI Fast Ethernet NIC", whereas I actually have a D-Link DFE-538TX 10/100 adapter. Furthermore, I get no icons (at all) in the Network Communications window. So if I want to change any settings of my LAN, for example, I can't, because I can't select the LAN icon or right-click on it. The LAN is working though. The current driver for the Realtek adapter which is listed is a MS driver.
View 5 Replies
View Related
Jul 20, 2005
I do not know how to determine the CPU load of audio on a motherboard how to determine if the sound includes a digital signal processor (DSP). I assume a DSP, especially for older CPUs (600 MHz. or so) is a big improvement because it offloads a lot of processing from the CPU. I am interested only in stereo. How can I know if an add-in sound card with a DSP is actually an improvement? Does the DSP overweigh other issues, eg. does a cheap Mad Dog Prowler 4.1 DSP sound card offer an improvement over the motherboard sound of a Compaq DeskPro ENS/P600? Truth is, I've been looking for but have not seen a treatise on this topic. Does anyone have any links for me to pursue?
View 5 Replies
View Related
May 10, 2010
Lately my computer has been extremely slow, not just internet slow but onboard slow. For example, if I click on an application from the desktop it will sit there for 10-20 seconds before anything happens. Occasionally I'll click multiple times on something and nothing will happen then 30 seconds later it will open multiple instances of things. This delay has been happening with just about anything I click on, acting like the computer's busy doing something else when nothing else should be going on. I've looked in the task manager and the applications column will be blank
View 14 Replies
View Related
Oct 10, 2007
We have a vender that wants to use our printer at work which is hooked up to our network but he can't join our network because he is not an employee.Just spoke to him and he has a Sony Vaio laptop and DOES NOT WANT ANY DRIVERS on his machine. Im lost. I was just going to install drivers on his machine and hook the printer up USB but he just formatted his machine and now doesn't want any drivers at all.
View 7 Replies
View Related
Jun 9, 2006
when I browse "My Network Places", the browsing is so incredibly slow. It takes a long while when you click one icon in the “My Network Places” for that to open up and go to the next directory or when just first displaying the computers in “My Network Places”, it goes so slow.
I use Windows Workgroup on the LAN to share out internet. Everything else, other than browsing the network, works great. The internet browses nice and fast.
This morning I opened My Network Places while my pc was still loading all the programs at start-up and "My Network Places" was fast. After a few minutes it was back to normal low pace. Now I guess it is something running on my pc slowing it down. Is it maybe to do with XP Service Pack 2? Before installing SP2 the network browsing on my pc is fast, after installing SP2, it is slow. Other computers on the network without SP2 browse the network quite fast.
All the pc's on the network has XP Pro.
View 14 Replies
View Related
May 2, 2008
so my Mom bought an HP pc about a year ago, she doesn't seem very bothered, but my brother and I are constantly finding problems. so we've been talking about reinstalling the system with a regular xp home edition,but will her license code from mediacenter go in home? we don't want to install home just to find out that it wont work, but we don't want media center edition either!
View 10 Replies
View Related
Aug 10, 2005
I have a authorised windows XP1 cd which had purchased from mumbai.Had formatted the system in the past and had reinstalled it again using the same cd and activated the windows over net using same CD and activation code.However this time it is giving a error that code is mistyped, which I have not. The shop where I had purchased CD is no longer open.
View 1 Replies
View Related
