Computer Asking For Network Login To Start?
Feb 28, 2008
I took the laptop home and tried to set it up on my home network. It had mapped network drives and the login still came up under the company domain. In the System settings, I changed it from being a "Computer primarily used in an office or work environment" to a "Computer primarily used in a home office environment". Now when it starts up, the domain is gone and I can't log in to the computer. It was under his work username and password, and it NO LONGER ACCEPTS THE PASSWORD because it is no longer logging in under a domain!
View 13 Replies
ADVERTISEMENT
Sep 27, 2007
i set up network setup wizard which led to csnw show in the control panel moreover now the way i log in and log off has also changed and when i start my comp it asks for a password.when i press ctrl alt and delete together instead og task manager opening a window security sumthing opens up i want to restore my log in and log off to normal state and delete the csnw **** and restore the task manager.
View 1 Replies
View Related
Jun 6, 2008
I've been doing some extensive searching for a solution to this since it turned up last night.I run Windows XP pro connected to a SBS 2003 server, which has been running fine for the last three months. However, my PC bluescreened last night, forcing me to restart - unfortunately, the size of the screen and resolutions meant I could not actually read most of the exception. When I reboot, it loads normally, goes through the network connections and comes up with the 'Press CTRL ALT DEL to Login' screen. I press it and the screen just refreshes.
View 6 Replies
View Related
Dec 8, 2006
im using windows xp sp2 and i kinda messed with things a little. now im getting the network login message during boot up. i tried system restore but there weren't any dates to go back to. how can i get rid of this?
View 5 Replies
View Related
Jun 22, 2005
is it possible to log into an XP machine connected to my network, using my network admin password?My XP machine is configured to show the list of users at login, but is there a way to login a different way, a shortcut key perhaps?
View 2 Replies
View Related
Dec 17, 2007
I have a Windows XP Pro computer at work. When I start the machine, I normally login to our work domain thru the "Ctrl+Alt+Del" login dialog. The company domain is selected by default or you can select the local computer. The company domain is controlled by a server running Small Business Server 2003.This computer is now going to be used at home for personnal use. How do I get rid of that "business" login and get back to the normal XP login? Normal XP login being the screen with the list of users and their associated icons.
View 1 Replies
View Related
Dec 11, 2004
EX-office laptop, and everytime it boots up the Windows 2000 logon screen comes up. How do I get rid of this?
View 2 Replies
View Related
Mar 25, 2008
After I used Ghost to restore image I can not log into domain.If I disconnected network cable, I can log into domain. After that,I need to connect network cable into pc to get all resource.Why? How to fix this problem?
View 3 Replies
View Related
Jul 27, 2005
I have Windows XP Home system that shares a folder and 2 printers with 2 other XP Home systems and 1 XP Pro system.All 4 computers are in the same workgroup Somewhere between 10 and 30 minutes after startup the XP Pro system loses the ability to browse the local network and loses contact with the shared folder and the printers. The share and the printers are still visible and useable to the other systems on the network
View 5 Replies
View Related
Aug 12, 2002
Have only tried this on XP Pro but it works great. Decreased my login time from 2mins to 15secs. Increased my network speed (ex. 170MB file took 15-20min. Now the same 170MB file takes less than 2mins). WOW!Here it is... Go into your network properties and then into your TCP/IP settings. Add your Server's IP address as Prefered DNS Server. Then select you Advanced button, go into your WINS tab and insert your Server's IP address for your WINS address as well. Reboot the system and you SHOULD see a difference. I have already tried this on several systems and have seen the same increase in speed
View 9 Replies
View Related
May 15, 2007
I noticed something was seriously hogging my memory or something as my pc was running really slow and you could hear it working overtime even when doing nothing. I ran McAfee 2007 and it removed 98 items and could not remove one of them, said it may be partially removed but not totally - c:windows.system32 AWTTSP.DLL.I ran spybot and it found some usuall offenders. I tried to go into the sys32 folder to manually remove the AWTTSP.DLL file and it would not let me. So I tried to restart my machine as the McAfee option offered to rescan upon start up, I did this and when I get to my password login screen before windows, all the text is in dingbats format and it wont accept my password.
View 10 Replies
View Related
Jun 22, 2008
My hp pavilion laptop won't start up. It keeps getting stopped at the screen before I enter my username and password to log in. There's a sign that just keeps saying
Please wait... (on top)
Windows is starting up....
And it's stuck there, it won't get anywhere.
I tried using the recovery disk, running chkdsk /r and fixboot but nothing happened, it's still the same thing
View 6 Replies
View Related
Feb 25, 2007
i have a dell computer with 2 hard drives and i installed windows xp media center edition on the second hard drive. now it gave me a choice of which one to go to. which was all fine. now being like 2 month later i didnt want that any more. so i formatted the second hardd rive so now i didnt want that choice at start up, but its still there and when i go and pick the one i formatted it says thats its not valid. which is right but what do i do to remove that message?
View 14 Replies
View Related
Mar 24, 2008
I came in the other morning to a computer warning: UNABLE TO WRITE TO VOLUME G and I knew it was going to be a bad day! In a nut shell:My XPSP1 machine makes it to my desktop wallpaper and then hangs. No icons or task bar or start button. Though the HD lght stays solid, it is active and may be accessed via a networked computer but XP doesn't finish loading. Safe mode is no different except I see a blank screen instead of wallpaper Though I can browse the XP CD through Task manager, nothing will run and attempts to run any file will return a NO PROGRAM ASSOCIATED error The PC will not boot from or even try to start up the XP CD. (just spins up) The six XP startup diskettes downloaded from MS hangs up here or there every time and fails to boot.
View 2 Replies
View Related
Mar 19, 2010
yellow ! on wan miniport ATW #2, can not start (code 10) tried uninstall & reinstall didn't work.
View 1 Replies
View Related
May 30, 2010
During the day, my internet connection died, actually, my NIC did sort of got error 10.I tried to uninstall and re-install it, and it seems to go back but then I get the error code 10.I installed a new Belkin USB NIC and it installed fine but also returns error code 10. I installed a Hawking USB NIC and it installed Ok, but returns error 10. I installed an old 802.11b SohoWare PCI card, and it installs fine, but returns error 10. I installed a Marvell Yukon 88E8052 PCI-E ASF Gigabit Ethernet Controller and it installed fine, just still get the error 10. I un-installed each NIC that didn't work and re-booted before installing the next.This all sounds like a virus that can attack any network device, as any form of network device fails on error 10.If I didn't have a few computers laying around,I couldn't make this post.I also checked all services between the computers, networking settings, group policies, BIOS settings, etc. to look for something different on the bum machine, but nothing is obvious that caused the one machine to allow a NIC to be installed, but then cannot be used. (I'm running XP-Pro, SP2)
View 6 Replies
View Related
May 28, 2009
After a fresh installation of XP the onboard network card is no longer working with the error message "This device cannot start (Code 10)". I've changed no parts, same process on installation, bios settings are fine, formatted and re-installed to the same error so I was hoping somebody could help me find out what the problem is.I'm using the Gigabyte EP41-UD3L which has the Realtek RTL8168D(P)/8111D(P) as the onboard NIC running Windows XP Pro SP2. I just used the motherboard installation CD to install it initially as I did on the previous install and have also tried new drivers but had no luck. I've never run into this Code 10 error before so I'm not sure where to go from here and any help will be appreciated.The Windows knowledge base isn't much help either as it's explanations for code 10 are.If the device has a FailReasonString value in its hardware key, that string is displayed as the error message. The driver or enumerator puts this registry string value there. If there is no FailReasonString in the hardware key,
View 3 Replies
View Related
Apr 21, 2010
i was prompted to restart my dell machine running windows xp pro at work this morning by mcafee. when i did so it started up with no task bar/start button. program icons were displayed, and programs would load when icons were clicked on. however i soon noticed that i could not cut and paste in illustrator. i cannot even cut and paste in any program, and cannot drag documents from one location to another.my network is no longer available either, including internet.
View 4 Replies
View Related
Mar 5, 2005
my home network might have a virus, programs start up and suddenly close/disappear. On one of the computers an error comes up and says that windows is shutting down(lass.exe file), then it shuts down and reboots. My anti-virus software can't detect nothing. I downloaded the sasser fix and it doesn't detect anything.
View 4 Replies
View Related
Oct 6, 2009
I apologize if I am asking this question wrong or not giving the correct information. I really need help. I have needed information on my computer for 2 days now; I am unable to log in. It appears I am having a few stop errors, a partition error along with a few other glitches>
View 8 Replies
View Related
Jun 2, 2008
I am giving my old computer to my partner and would like to change the log in screen so it will stop saying my name.I have changed the password on it, but it still says my name when logging back it and this has to be manually changed.As well, when logging off, it keeps asking to log off with my name, not the new user.
View 6 Replies
View Related
Feb 7, 2005
I have a P4 2200Mhz desktop, running XP Pro, service pack 1. The computer was running fine last night but when I started it up this morning it comes to the windows login screen where my user name is already in, but when I try to put my password in the cursors freezes and I can�t do anything. Then I have to do a hard restart. I tried starting it in safe mode but the same thing happens.
View 6 Replies
View Related
Mar 27, 2007
My windows xp dell pc is not loading up the user login screen. The hard drive sounds like its trying to load something but failing. Then i can only get onto the login screen after various attempts at restarting. Is there a way to fix this non loading user login screen.
View 14 Replies
View Related
Mar 1, 2006
Can log in, but now nothing else works. My mouse works, but I can't use ctrl alt delete, and the only option left is to shut down.
View 7 Replies
View Related
Jul 19, 2005
Today, I found out that my computer hangs at the login screen. I boot up the computer as normal, and the login box is shown. I click into the password field (Note: I do not have the normal welcome screen, I have the Win2000 one.) and am ready to type my password. When I begin typing my password, nothing pops up. I attempt to move the mouse, but it is frozen where it last was. Sometimes it doesn't even move (The mouse) when I first boot it up. So seeing this as any problem, I go in Safe Mode. It's a sure bet that the mouse will move. Though it moves flawlessly, the password box is where the annoyance stays. I attempt to type my password, but then my computer hangs, AGAIN.I'm typing this from my brother's computer, and have yet to find the answer. I hear that this is some sort of password corruption and can be prevented by not having passwords on the account. I want to change this, but I can't login in the first place.
This I'm sure is not a virus. I scan for viruses every week (With Kaspersky), leave Ad-Aware, Giant Antispyware, and Zone Alarm on. I've used Google to search for answers, and yes I've found them being solved. They include the same problems, but they can get into Safe Mode, which in my case, I can't. I've tried Safe Mode 7 times and it doesn't work. (I can get in safe mode but the keyboard/mouse still hang)I didn't have time to backup files, and I have pictures that I haven't backed up onto CDs. People that have solved this problem have done it without reformatting, and I need a solution without reformatting.
View 4 Replies
View Related
Jun 8, 2005
My computer keeps sticking on the Welcome Screen, but only on my default username, the administrator account loads perfectly. I cannot fix this name because the primary username cannot be deleted. Any suggestions besides msconfig? I already tried removing all startup programs and it did not fix it.
View 2 Replies
View Related
Mar 21, 2006
I was just typing along in a word document when my whole screen on my laptop flipped. File, Edit etc are across the bottom and start and all those things normally across the bottom are on the top - but upside down. The mouse is working backwards as well. MAJOR PAIN. When I restart it, the Windows screen comes up correctly but from the login screen on everything is flipped. I just use that computer for word processing not the internet so I'm hoping it is not a virus. I tried restoring the system
View 1 Replies
View Related
Aug 17, 2010
I only have 1 user on my computer, but it doesn't automatically log-in for me anymore. I never changed the settings, it just did on it's own this morning for some reason. Also, now for some reason instead of going to a screen saver when I'm inactive for like 10 minutes, it will instead take me back to the log in screen. Also, how can I stop Windows Messenger (a weak version of MSN Messenger) from starting when I turn on my computer? I'm using Windows XP.
View 2 Replies
View Related
Jan 4, 2008
some relatives of mine have a decent enough computer with not that much stuff on it (its better than my PC1). anyhow they've asked my to try and speed up their boot time because it takes yonks to reach the log in screen and it really shouldn't. so im going to have a thorough clean of msconfig, im going to use "ntregopt" and i might even use ATF cleaner.anything else i can use to speed it up?
View 10 Replies
View Related
Sep 30, 2009
I bought a new system with XP OS. First time it is directly login into admin account.I created 2 more users on this system and created password for admin user.But when I switch on computer, It directly login into Admin user.Once I log off it is coming welcome screen and asking selecting user and Password.
View 7 Replies
View Related
Aug 25, 2007
i've installed my Win Xp Home using an nLite mastered image on which I selected my user to autologin on boot. Now I want to turn that off, and have the login screen at boot instead. Any hints on how I shall do it?
View 3 Replies
View Related
