Not Recognizes Sony CRX320E DVD Driver
Mar 4, 2005I have a sony CRX320E and I was running windows 2000. After updating with Windows XP, my computer no longer recognizes the CD-rom at all? What can I do?
View 6 RepliesI have a sony CRX320E and I was running windows 2000. After updating with Windows XP, my computer no longer recognizes the CD-rom at all? What can I do?
View 6 Repliesshows the brand of hard drive and says that it has installed it and is working correctly. The drive shows up under disk management but when you go into "My Computer", it's not there.
View 8 Replies View RelatedI re-installed XP after having a mal-ware/spy-ware issue. The problem is my machine no longer recognizes my DVD players properly.
Both work working fine prior to the re-install. Now neither will recognize a CD-ROM (I have enabled CD-recording) and neither will burn a DVD. Further, one of them is listed under Explorer as a CD-ROM rather than a DVD-ROM.
I have tried delete both from device manager and having XP reinstall them on start up but no luck.
For the past few weeks, windows has been only recognizing half (256mb) of my total 512mb of ram. Something that makes this problem even more peculiar is that third party tools such as cpu-z and speedfan see the full 512mb, but the system properties and dxdiag both say 256mb. The bios also says 512mb, dual channel mode. I can also make any information about this system that anyone needs to help me with this.
View 18 Replies View RelatedI have tried replacing the power supply-no change.I've tried unhooking cd-rom, floppy, replace ram & everything remains unchanged.Bios never recognizes a hard drive. I've tried several known good hard drives and the original hard drive works in another machine. It starts POST & I get HP splash then back to NO OPERATING SYSTEM FOUND, It doesn't find the CD rom drive either. What might this be related to? I've replace hard drive cable, floppy cable. The only cable I haven't replaced it the cd-rom drive.
The hard drive works as a slave in another computer. I am running virus scan and spyware on. But, why won't it work in the other computer? I'm thinking its somehow related to the bios and the fact that it cannot see the drive in the bios. I don't find anywhere in this particular bios where I can try to auto recognize the drives
I'm new to Linux and have been using SUse 9.2 and XP systems. Hard drive set up was as follows: Swap (502MB);C drive;Linux (4 Gig);E drive (contained XP OS). Using 37 Gig Drive, Athlon 800 mhz CPU. I used PartionMagic in Windows to set up the partitions and had BootMagic disabled and all worked well. System would boot to Grub and then from there I could go to Windows XP boot. Linux partion was my active partition. Everything ran just fine...but I wasnt using Linux often and decided to try to boot directly to XP.
I decided to make my Windows OS drive E active so that I could boot directly to Windows boot instead of Grub. But, obviously, Grub still booted first. I made the mistake, then, by enabling BootMagic in the hopes I could get to Windows directly without going through Grub. Well BootMagic hid my C:Drive which was viewable simultaneously with E:drive (which contained XP OS, another setup mistake I made when partitioning...but still worked). As a result Grub is gone and I also cannot boot to XP or Linus, even after trying to activate C:drive or activating E:drive containing my XP OS. I'm pretty sure that XP recognizes C:drive as home, even though OS is on E. I have not yet used 'fixmbr' for fear of loosing data contained in C and E partitions. I've considered using spare hard drive as a new boot drive and access files from original hard drive, save them, and then start from scratch with XP....
I have a RAID system setup as JBOD on both drive in my laptop and I formatted using DBAN... Now i boot with Windows XP Pro so i can install it and it only recognizes one of my drives. I loaded my RAID drivers. I go ahead and try to install XP on it anyway. I tried to format the drive again using FULL format, i tried a Quick Format, and I also tried leaving it as is. It will install the setup files and reboot my computer. So i take out the XP disc but then it doesnt recognize any disks. Does anyone know how i can reintsall xP back on this sysetm or how I can get XP to recognize both my drives even if i slipstreamed my RAID drivers in it already.
View 12 Replies View RelatedMy laptop doesn't detect the external hard drive. It is strange that sometime the laptop can detect the external hard drive, but most of the time it doesn't.
I have tested 2 different external hard drive and both of them are not detected by the laptop too. When I tried it on other computer, both external cases work perfectly. I am not sure is it because of the usb driver is corrupted or what, but any helps is much appreciated. Thank you.
I'm running a pc with a 975xbx board and an e6600 that has worked fine for 2 years plus. A couple months ago i replaced my computer case, power supply, and got some new storage hard drives, but my RAM, mobo, cpu, and optical drives stayed the same.I was running windows xp fine for this whole time....and then a couple days ago as I was surfing the web, the computer just shut off spontaneously. no warning, no nothing, just black screen and the computer was off.Now, when I start up, I'll get to the windows startup logo before I get a 0x00000007e blue screen crash.In BIOS, my hard drives, RAM, etc are picked up fine. Just for kicks i moved some ram around, dropped to one stick, unhooked the optical drives, yet the problem persists.Now, if i throw in my windows xp install CD and try to repair or just reinstall, it doesn't find the drive at all. but the bios does.
If i take a new formatted hard drive and insert it, the xp install again doesnt find it.I have 2 raid controllers on my intel board, and the floppy disks for both, but when I boot the raid controller screens pop up fine and recognize drives prior to the windows logo. If i throw my install CD in, however, and hit F6 to go to the raid controller install, the xp cd can't seem to read my floppy disks, as if they aren't even there. but the floppy drive light is on, powered, and the cables are plugged in.This is just really confusing, as if my computer just doesn't read anything but the CD drive.I'm at a loss. I'm willing to just do a clean install of windows on a formatted hard drive, but the windows CD install program won't detect the new drive (it is low-level formatted).I'm using XP professional and it's a full install CD, not just recovery.
I just got a used xp.. its slow and i cant seem to get any thing to work on it like restore , defrag,and i cant get it to change from dial up to dsl. pls i really need some help im all new to the computer
View 3 Replies View RelatedWindows media player or on any other media player, not able to hear audio but can view video on windows Xp operating system.
1.No issue with sound drivers as audio is tested and detected.
2.No issue with sony cd-DVD device. it is been tested and played on other system.
3.Media used is OK as it was able to play audio earlier
4.Codec was updated
My computer started slowing dow about a month ago. It got to where it took forever to load when I turned the computer on and even opening software took forever. Same with turning it off. It also hangs up on me. I can't even press Ctrl + Alt+ Delete to end a program when its not responding. I have to strictly turn the computer off just to get somewhere. I uninstalled and reinstalled Norton. I have the entire Norton system and catches nothing. It says all systems are working properly.
I was asked earlier if I had ever put a music CD in the computer that was by SONY, and I can say that probably close to 20 over the 4 years that I have had it. I was told that SONY puts this "thing" on the CDs that transfer to your computer before you even hear the music so that you are penalized if you try to duplicate them.
Need help finding drivers for a sony PCV-1112 computer.
View 11 Replies View RelatedMy son has a Sony VAIO laptop running Windows XP SP3 which originally had Windows/NT on it. There are several issues with this machine including how it slows down to a crawl and kills Firefox so that it must be rebooted. I want to know this: there are several folders in the C:WINDOWS directory as follows
View 7 Replies View RelatedI have burned this little 15 MB movie I created w/PS3 and I have no problems playing it on any PC w/WMP Ver 10, but when I burn a copy onto a CD-R, CD-RW, DVD-, or DVD+ and try to play it in my new Sony DVD/VCR
multi-format player, it won't play. The Sony supports regular CD's, DVD+ RW/+R, DVD- RW/-R, JEPG, MP3, etc, it's brand new. So who do you call Microsoft who created the PS3 software, Toshiba (new laptop w/awsome
mulit-dvd burner drive), Record Now (software that does the burning) or Sony who manufactured the DVD/VCR unit (new).Each tech seems to want to brush me off on the other.Like, is there some simple switch or something I'm not doing that makes a big difference when I want this movie to burn to a disk to be played back on
a TV?
trying to install ACID7 on HP xw4300 workstation, all of my SONY software stopped working. I am trying to edit the registry to get rid of all references to Sony so that I can re-install the 7 or 8 programs that I used to have.but I get an error message: "Cannot open Sony Creative Software. Error while opening key." I find that a lot of registry entries are doing that to me, but the only ones I care about are the Sony ones. I can't change permissions because I can't open or save changes...Is that enough to be clear
View 3 Replies View RelatedI am running XP on a Sony Vaio. Recently, every time we boot it up and try to start ANY program, we get the"Windows Explorer has encountered a problem and needs to close" message. I would like to back up some docs, but have started it in safe mode with and without networking, and have been unable even to open Backup or My Computer to copy docs
View 5 Replies View RelatedI'm trying to reinstall XP on my Sony Vaio laptop after having to replace the hard drive. It won't boot from the CD - it just tells me that the operating system is not found. I had that much figured out. I'm no computer whiz, but it looks to me like the drive IS recognized in the BIOS. I even loaded the XP onto a flash drive and tried to boot from that.
View 7 Replies View RelatedMy computer has been taking like 5 times to start up. sometimes randomly shuts down and runs really bad. i got online chat with sony. they first said to do bios reset.f2 didnt do anything so they said back up and do system recovery.
View 3 Replies View Relatedi have a sony vaio model pcg572m , it`s quite old .anyway i had to reload windows xp on to it ,and now i can`t get a sound out of it ,i can`t find what make the soundcard is,plus i can`t find any drivers on sonys sites ,in sounds and devices it just says, no audio device
View 4 Replies View RelatedI am trying to reload XP on a sony Vaio machine. First off, when it comes up with 'press any key to boot to CD' nothing works. I have done searches on this and have tried both PS2 and usb keyboards. I have also tried to access bios but nothing loads it.I have tried esc, tab, del, f1-f12 and no matter what, windows continues to load. I know the keyboard works because once windows loads, I can type. So this is an issue with the usb keyboard and bios I assume but I cannot get to bios to enable the usb support.
View 9 Replies View RelatedI purchased a SIIG PCI firmware adapter. It has no drivers and says that it will use Win XP drivers. Well I installed the board and booted the pc, Win XP
recognized the hardware but could not find any drivers. I tried unplugging it manually, installing it in another card slot with no luck. I took it back to
my pc dealer and he plugged it in his system and had no problems. I decide to try another brand, an IO Gear GIC1394.
So I have a Sony Vaio PCG-VX88, and the hard drive has been clicking and the computer has just been acting weird. I can no longer start photoshop, when I ran Windows Spyware check and began deleteing the files it started clicking and after restarting I can't get it back to normal state like I could before. When I started it up it says "no opperating system found" (happend twice) then finally after the 3rd try goes and starts up, the last time I tried it did a check on the file system of the C: drive, will a reformat help Or is it a hardware thing
View 2 Replies View RelatedI have a Sony Vio model PCG-3E2L. I tried installing xp on my sony computer that had vista on it. It continually blue screened during the very beginning of the install process. So, I decided to remove vista. I could not get vista to uninstall so I finally ran an older bootable windows like 98 or me which got me to dos. In dos I deleted and reset partitions. I did not format as format was not on the disk I used. Now, with a fresh hard drive I figured that xp would install but it won't. The computer boots by cd but again it continually blue screens at the beginning of the install process b/f it asks any questions but after loading drivers.
View 3 Replies View RelatedMy computer will not start up. It boots and and gets to a screen where it asks if I want to start windows normally. I do that and then the window xp logo appears and then it reboots and starts all over again. Right after the window xp logo appears something runs across the screen and disappears to fast to see what it is.I have norton internet and antivirus and the sp2 pack of windows xp installed. However, I have not installed anything recently. Just prior to the problem my comcast high speed internet went down and when it came on that is when I had the problem. I can boot from the CD-rom and have done a check with a cdrom norton and I have no viruses, but it is not the latest viruses on the disk and I dont know how to down load them onto the cdrom from norton site.
View 6 Replies View RelatedI am not aware of any change to my sys, except no sound at all. I've done all the help troublshooting suggestions, I have the same Yamaha device that came with the viao and am using the same built-in speakers.
View 6 Replies View RelatedI have a Sony Viao (PCG-FX170) laptop, with operating system upgraded from Win ME to Win XP. Its firewire port will not operate external (LaCie) DVD writer and after buying a PCMCIA card with 4 firewire outputs, they don't work either. Problem seems to be: no voltage on the firewire socket to "turn on" the DVD writer. Windows says Firewire drivers are "working normally".Is this likely a hardware or software problem.
View 2 Replies View RelatedI have no idea, but about 5 days ago, my computer started acting very slow on boot up.I play a sound upon boot up and the them song plays angonizingly slow.From power on to full access its nearly 7 mins.
Ive ran the system defragmenter.
While running about a week ago, the monitor simply quit displaying anything. Now, when I boot up the laptop, it shows the BOIS icons and the Windows XP splash screen, but when it should show the logon screen (I have two user accounts on the box) the monitor goes blank. I know the laptop is still running because after a couple of minutes the screen saver music starts to play, so it must be a monitor-specific issue.I've gone into setup and reset the boot sequence to no effect, took out the battery and rebooted to no effect and now am at the end of my limited hardware diagnostic abilities.
View 2 Replies View RelatedThe Vaio is about 3/4 years old now, and I just did a reinstallation of Windows XP to clean things up a bit. Before the reinstall, I managed to track down this page on the Sony Asia website (http://www.sony-asia.com/support/dow...subpage=detail), and downloaded all of the listed drivers onto a memory stick. Having formatted the disk and installed Windows, I installed the drivers in the order listed on the website. They all worked perfectly, except for the Realtek audio driver.No sound was played by the computer, and when viewing the sound preferences under the Control Panel, I was informed that there is No Audio Device.
View 1 Replies View RelatedA family members sony vaio will not boot up, the computer doesnt load windows XP (The windows XP loading screen appears but will then goes blank and reboots automatically.) When the computer first turns on a blank screen appears with text saying "we're sorry for the inconvienice, etc..." then has a 30 second timer for which option i would like to choose.These are my options below (which none work).
It doesnt work on Safe Mode, Safe Mode (Networking), Safe Mode (Command Prompt) or even the "last known to work configurations". Im totally lost on what i can do from here. I need assistence people!!