I recently (about a month ago)had a computer repair shop upgrade my computer and they installed Win XP Home. Windows update now tells me that I may not have a ligitmate copy of Windows installed. I was told that the only way to get updates now was to buy a legitimate copy and that what I did today. Is there anyway of putting in the new product I.D. number into my computer and activating and registering it with Microsoft without have to do a complete reinstall? I am so mad at the repair shop. My machine is a P IV, 1.6 gigs, 512 ram
I currently have a copy of XP pro on my laptop and want to upgrade my girlfriends computer to XP from Windows 2000. Can I install my copy of XP onto her laptop?
A local store with great system prices installed a pirated copy of XP on my machine. Now, I can't get service packs, etc.How do I correct this situation? If I purchase a genuine copy, must I do acomplete reinstall, install over the existing copy, do a repair, or WHAT??
i started installing Windows XP. I first did a reformat from WXP cd of my HDD after which XP copied some files to it. It then said it was gonna restard after 15 seconds that went by and restart after.It asked to press a key to restard from the CD but I didn't and the install should have kept on going on from there But the screen just stayed black with no activity going on at all. No beep, no restart,no CD spinning, but all fan running. I restart a few time,even restard the install always with the same result. Everything goed fine until the first restart happen.
I had to format the hard drive and reload XP SP2.Seems to be working fine.But, my USB ports don't work. Do I have a driver problem, and if so, what is the fix.
i installed an operationg system (service pack 3, but if i want to copy a file either from desktop or any where,i do klick on the right side of the mouse and shose ( send to ),and i dont see hard disks among the lists of where to send to,while i have 2 hard disks installed
Regularly played games are running slower than usual, have had one crash from, apparently, being too stressful on the machine (CTD).Sometimes it holds steady and plays well enough... Battlefield 2 is where I notice the significant performance loss and where I benchmark my machine.Think I am missing a driver? Can I find out what driver I am missing? Device Manager doesn't show anything to the contrary. I've installed drivers from the MSI site(4in1 setup), ati/amd drivers for video card, netgear lan drivers.
I recently had my XPS M1710(Windows XP Pro) swapped out for a M1730(VHP) and would like some assistance in getting rid of Vista and installing XP Pro onto the new system.
A friends HP Media Center PC m7077c crashed. Had no recover disk, etc. Installed XP Pro SP2 and I need drivers (according to Device Manager). No sound is obvious but video controller is not. Video seems okay. Where do I find drivers for this machine. XP Pro, Home and MCE are different OS's ... as far as my experience. The drivers are not the same.
I have been looking on Ebay at used/refurbished computers for upgrading from my current and older P4 chip computer. One that I'm looking at says that it has a (legal and genuine version) of Windows XP Pro SP3 o/s installed on the custom built computer, but there's no disk. If I were to purchase a computer like this, and make a back up copy of that installed o/s on my own disk, will there be any difference than if I had received the original installation disk or manufacturer's restore disk?.....or would the installed (and backup) o/s be considered an "unlicensed" copy?
I'm trying to install UPnP on my system but I get this error message. The dll file IS there. I have tried downloading the file from the internet and Browsing to it on the desktop but it always gives this error message.
Windows xp pro and discovered that it is a pirated copy. I want to get rid of it and install my valid copy of 98se. do i format my hard drive i do have files i want to keep.
Im trying to copy a licensed copy of software to another cd. The software is on a 700 meg cdr.However there happens to be 1.5 gigs of files on the cd. How can i transfer the files to another cd the same way. Im trying to make a backup copy of my Microsoft office 2003 cd just in case anything happens to the original.
I have apparently got a bad copy of windows xp that is not genuine. I can't update anything internet explorer windows media player nothing. Is there any way I can fix this problem? Should I get a genuine copy of xp and make back up copies of all my files or ahould I just get a new pc altogether???
I've installed the new drive, formatted it two partitions, and installed my XP on the new drive. The old drive is still installed, and I can select which drive I am booting off of. Boot off the old drive, I'm on my old PC. Boot off the new one, I'm on the new.Only one of the XPs are active at a time. The other says it must be activated. So, at this point, I boot to the old, and (with this OS activated)run the Files and Settings Transfer Wizard. I specify that I am saving the data on one of the drives in the PC. It runs and says it's successful. Then I boot off the new drive and (now with THIS OS activated) when I point the FAST to the directory where I saved the files, the wizard says there's no files there to load. I can see .dat files in the directory, but the wizard can't.
I am trying to copy a file from computer A to computer B. I use run-cmd-copy. but it was not successful. the error message is syntax error or incorrect location. Can anyone explain more how to copy a file to another computer from Run - CMD.is it possible to copy a folder using this command?
I am having odd problems with XP on my laptop. I installed XP on a new Hard Drive a few weeks ago. I then added SP 1 and SP 2. I downloaded all the hot fixes. I installed from the Dell site as much as I could. ( The original OS was windows ME) Now the System Restore does not work. It goes through the gyrations then comes back and says "system not restored". When I click on the Help or restore settings nothing happens. I cleared the restore points last week and set a new restore point. When I tried it it worked fine. I went back to check this week and it didn't work again. Other problems with mouse installation, USB settings, and odd start up and shut down problems makes me think that there is corruption in windows. I put the Windows XP CD in to see if I could fix some of these problems. I thought maybe reinstalling basic Windows without reformatting would fix the problem. A warning came up and said the copy of windows in my machine is newer than the one on the disk and if I continued I would lose all settings. I assume it means SP1 and SP2. Can I fix this without starting all over again? Also would it be possible to partition my HD and put a new copy of XP on the partition; then transfer from the old copy?
i want to save my windows i use now to a ISO file so i can reinstall it at that state so i don't have to format and start fresh. Understand? So. What im trying to say is. I install a fresh copy of windows xp then i install the things i use the most like themes programs etc. then i want to save it to a ISO so later on when i think its time to go back to my windows xp in a new state i can just install the windows i had before without installing a new copy and installing everything one by one.
I can't cut, copy, or paste anything. when I right click it the menu will pop up and the cut, copy and paste options are listed, but when I go to where I need to paste what ever I have cut or copied the menu that pops up only has two options.......[1] select all ......and [2] properties. What can I do to remedy this problem... I did here recently reformat the HHD and re-install windows XP (with in the last two weeks) thanks for any help given on this topic.
Can anyone help? I wish to copy My Pictures to CD using XPs own copying system. When I put CD in drive and click on My Pictures, under the Picture Tasks on the left side menu, there is no item COPY TO CD. There is only copy this file under the file and folder tasks. I feel sure it is something to do with the two folder icons at the top menu, but I cannot get COPY TO CD to show.
I have windows xp sp2 on oem, is it ok for me to make a backup copy of it in case i lose it, i wont lend or sell it to anyone, just for personal use and as only i have the product key stuck on my computer is it o.k. to do this? Just in case i lose it and will it still work eg. let me format my computer? in case i lose my original.
Last year I had work done on my laptop and the shop replaced my old Windows 98 with Windows XP. Now I am told by MS my XP is not genuine and no updates can be sent to me. I get a message every 10 minutes asking if i want to "get genuine" or "resolve later". If I click get genuine, will I be charged a fee for a new XP? What should I do?
I need to copy all files on a local drive to a network drive once a week. I want to be able to do this using a batch file that I can have Windows scheduler execute. This means the use of the Windows Backup utility is not possible. However, program suggestions that have a cloning ability with no compression and does not create its own file can be used.
Went through and individually highlighted folders (containing pictures) to be copied onto cd-r...then clicked on "copy these folders"...everytime the message comes up that there is no disc. I take the disc out( brand new disc), put it back in...same message. I have even tried dvd drive. Nothing. Any suggestions? Want to back things up but don't seem to be able. I read on microsoft.com there is a Backup with Win XP--my understanding it's on the win xp cd...and you have to install it...could've misunderstood...because I tried that and come up with nothing. Input please....
I reecently installed Vista on my computer to try it out and after a few weeks wanted to change back to XP Pro as has some things i did not like.
Here's what i did:
1. I booted into BIOS and changed the bootup to cd/dvd. 2. Booted with my Original CP PRO cd (Not bought with my computer bought after). 3. followed the instructions and deleted the partition on C and formatted (Full not Quick) the C: drive with NTFS.
It gets to the stage that the SETUP is copying files and after 43% and says it cannot copy file WOWEB.exe and to press Esc to skip, F3 to QUIT and ENTER to try again.
It does this with a whole lot of files (Over 30) then after skipping thise files it reboots and gets the BLUE SCREEN OF DEATH!!!.
I have 2 DVD drives and tried both with the same result. I tried a differant Windows XP disk with the same results.
The motherboard has a backup facility which i had backed up previously with XP but not fully and can restore to that point but i want a complete reinstall.
I have formatted and installed windows XP with that disc loads of times without any problems before.
I have installed/reinstalled MS Paint several times and restarted my computer. It is there but I cannot paste or copy. I had registry mechanic on my computer and since then it has not worked.
