I recently had to reinstall windows XP twice. I no longer have permission to access to my folder under documents & settings. Is there anyway that I can over ride the permissions? I also have two operating system choices when I boot the computer. I know there is a command to use in the run option to remove the invalid operatings system choice.
View 3 RepliesHow can i recover access permission on particuler files and folders? Because i am not able to open some word and excel files even i am logged with administrator user.
View 1 Replies View RelatedRecently I tried to open up Photoshop CS2 like I do all the time, and it said I do not have permission to access this program.I am the only one who uses my computer, with no guest accounts active.I also noticed I can't even select to shut down computer from the Start button. I have to log out first, and then shut down from there.I did a virus sweep and found 3 Trojans, which have now been deleted. I also created another User account as an administrator, but I still get permission problems.
View 9 Replies View RelatedFirst, I still have problem to set a folder to be private. It should be a VERY EAY task.But when I right click the Property of a folder on D: drive its "Make this private" check box is gray out.So I can NOT make a folder be private in D: drive.
It seem to me the private folders are private under "My Documents" in C: drive.
I read from Help, it says a drive MUST be NTFS
But I type
convert D: /fs:ntfs
It says my D drive already is NTFS format.
Since it already in NTFS, then why I can't
make it private?
I have denied the access to removable mass storage. Now when i tried to use it it promts access is denied.
View 1 Replies View RelatedI have a network of 20 computers with three workgroups. One workgroup (three computers) would like to have shared folers within the workgroup that are NOT
available to Everyone outside their workgroup but on the network. All 20 computers are on windows XP I went and unchecked simple file sharing so I can have the permission tab available. However I am having hard time finding the othertwo computers in the workgroup so I can grant them full access permsission. I assume I need to remove 'everyone' and add the other two computers in the work group and grant them full permission.
I just completed a system restore on my eMachines computer. I have Windows XP. Now, I had one folder that I backed up, but now everytime I try to enter it, it says Access Denied. I did hide this folder on my hard drive before, but all of my other hidden folders that I backed up work fine. I would really appreciate it if somebody could tell me how to gain access to this folder, I have very important information in it.
View 3 Replies View RelatedTried to defrag hard drive and after action report shows 14.05 GB file that cannot be defragged. Searched for file Documents and Settings Default User Application Data Microsoft ProtectS-1-5-21-676439804-2044662667-630 and got an invalid folder message. Report on volume fragmentation:Total fragmentation=25%
File fragmentation=50% Free space fragmentation=0%
I am trying to install a printer, but the Print Spooler service is not active. I have attempted to activate the Print Spooler service every way possible, but always recieve this error! Quote: Could not start the Print Spooler service on Local Computer.
Error 12: The access code is invalid.
i had Win xp sp2 on my hard-drive i installed windows 98 on my remove-able disk... after that i formatted my removeable disk now i just have Win xp but when start up it still shows the os choice menu. I just want to know can i delete that option of choosing win98 which doesn't exist. And so i can save 30 sec of booting time in case my pc reboots after an update or so when i am not around.
View 2 Replies View RelatedCode '413' when i tried to log on here . started yesterdad evening .turned comp off and on that seemed to get rid of it .but came on the comp this morning and all was fine .then after a short time the messages started appearing again . trying to log in to hotmail i got the invalid header . in another hot i got in tryed to delete and got invalid header i think . tryed to send a message on a forum got invalid verb . last night on the comp shopper forum i could send if i put my message in the title box and 2 words in the message box but if i tried to put more words in the message box got invalid verb . tryed turning on and off today but no luck there . have an advent 9317 with duo 2 core . fire wall is zone alarm pro . antivirus is nod32 and webroot sweeprr as spyware . went on firefox and the same thing happened.
View 1 Replies View RelatedA little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
View 7 Replies View RelatedI've hit a problem with Windows XP, I've looked around and I haven't been able to find anywhere which offers a potential solution, This hit my computer without warning, I switched it on this morning and it worked as normal, I was using Google Chrome, in order to browse websites that were free of spyware (the Guardian at time of crash) all of a sudden things started to freeze up. I restarted the computer, and now a lot of programs are refusing to open - Microsoft Office, among others, states "Error: There Are No More Files", whilst other programs such as Google Chrome and Internet Explorer state "Attempt to Access From Invalid Address", even when I am running them from their root folders.
View 6 Replies View RelatedI am getting this error message when I start windows XP Home, It says Replace the disk and press any key On doing so it starts normally.othing is in the CD drives and floppy is disabled in Bios.Booting is from the second hard disk - partition 2.
View 12 Replies View RelatedMy XP desktop was in the middle of running CHKDSK when there was a power outage. Since then the computer will not start-up. It begins the usual POST, recognizing the drives then it comes to a screen saying Invalid System Disk, Replace the disk and then press any key.There are no disks in any of the CD/DVD drives. I have tried the recovery disk and even a full version XP disk, but nothing seems to be "seen". I get the same screen every time.
View 4 Replies View RelatedI just had Win 98 on my computer, but reformatted because I wished to start anew with Windows XP. The format went well, but I'm having trouble installing XP now. When I start up the computer with the setup disk in the disc drive, it tells me it's an invalid system disk.My problem is I just can't seem to get the setup to run... I dunno am I doing something wrong or is there something I'm not doing that I should be doing? I figured with the cd in the drive it would automatically start the setup
View 5 Replies View RelatedI have a Dell Dimension L866r with 512 mb. of ram . I have my bios set to boot from CDrom first, then my harddrive. When I boot my computer up with the XP Home disk in it all I get is Invalid System disk.
View 2 Replies View RelatedI have a problem with a Windows XP installation. The problem arose when I attached a SATA SSD with Windows 7 on it, intending to check whether the SSD had failed. The computer booted up into XP but I couldn't see the SSD in My Computer. When I restarted the computer, I received GRUB (the Linux bootloader) error 22. It is possible that Linux was active on the Windows XP HDD at some point, but it is long gone and I didn't expect to find GRUB controlling the boot. I switched off and removed the SSD drive so that the computer would, so I thought, be in the state in which it was when I approached it. I switched it on and got to GRUB error 21. I inserted my Windows XP CD-ROM and restarted, selecting the repair option. I ran CHKDSK, FIXBOOT and FIXMBR and restarted but now I get error INVALID SYSTEM DISK. INSERT SYSTEM DISK AND PRESS ENTER.
View 5 Replies View RelatedUntil recently, my computer's single 120GB hard drive has been partitioned like so:
C: - ~5GB, active partition with boot.ini etc, used as a recovery partition D: - ~110GB, extended partition with Windows Last night I finally took the plunge and, using Paragon Partition Manager, got rid of the C: partition seeing as I never used its contents, and extended the D: patition to take up the free space created. I then made the D: partition PRIMARY and ACTIVE.To boot into XP, I then used a boot disk from here.windows started fine, and everything was dandy. I copied the BOOT.ini, NTLDR, NTDETECT.COM files across to D:, removed the boot disk and rebooted.'Invalid System Disk'. I'm still unable to boot without a boot CD.
I left my computer on for about 3 hours, when I returned the screen was black with the a message First time this happened INVALID System Disk Replace Disk and then press any key There is or was no 3 1/2 floppy disk in the computer. Every time I hit any key nothing would happen. When I would reboot I would get to the same screen with the same message and nothing would happen. Then I would reboot again and when that screen would come our I would insert a 3 1/2 Floppy into the computer and the computer would start up. So now the only time I can get the computer to start up I must insert a 3 1/2 floppy.
View 1 Replies View RelatedI recently purchased a refurbished Dell OptiPlexGX270. It came with no OS and I am trying to install XP Home. It's using BIOS version A06. I have changed the boot order to CD, HD, and Nic.I boot up the computer and then insert the XP Home installation disk. I get the following:Intel Boot Agent GE v.1.2.21 Copyright 1997-2004, Intel Corp CLIENT MAC ADDR 0D 56 8B 36 76 GUID 444 54 C4C 5900 7053 804D B5C04F483431 PXE-E53: No boot filename received, PXE-M0E: Exiting Intel Boot Agent Invalid System Disk, replace the disk, and then press any key.
View 4 Replies View RelatedIm trying to help my dad get his computer working again. We bought the MCD's for the packard bell computer he owns and first we were struck with a glue part error 5. However we seemed to fix this through a format and re creating the hidden sector. We then ran the CD's and it went seemingly fine through the installation process, then finally we took out MCD 1 as we were told, the PC restarted and we were faced with another issue:'Invalid system Disk. Replace the disk.'Were now stuck on this. I have tried reinstalling again, also I've tried to create another bootdisk just incase but due to me having Vista I couldn't help him much there as it didn't install. I had already formatted and reinstalled the hidden partition and now im stuck as im only 16 and not very farmiliar with the boot process. So I would appreciate any help if you would be able to.
View 14 Replies View RelatedRecently I had a BSOD problem 0x000007b after running ComboFix and so I ran a repair XP SP2/3 and the Blue Screen is gone but now during the Repair steps screen (The light blue screen with Step 1, Step2 and the Ads on the right for the various programs) I get lsass.exe Invalid Parameters Passed and a prompt "Ok" which reboots my computer.
View 1 Replies View RelatedI'm running xp home edition on my dell system. When I tried to boot up, the screen went black and I got the system error message. From there you can only click ok, the system reboots and goes thfough the same process. It also does it in safe mode. I've tried to use "the last known working configuration" from the f8 screen, same thing.I was going to try a repair install, but for some reason I have a xp pro disk, not home edition. Can I do a repair using this disk (it's a dell disk)? Or am i going to have to wipe everything out and install xp pro to get the system to work.
View 8 Replies View RelatedFiles on my second hard drive were shared on the network (level 4, Network users could only read) and primary hard drive was reformatted and Windows XP sp2 was installed.(without the files being unshared) Now when trying to access the files the error "Access Denied" occurs and I cant access or delete the files (would really like to recover the data about four years worth of work taking up about 75% of the hard drive)
I am the Admin, and I can't change any of the folders propertys as I again get the "access denied" error. I've been looking everywhere for a solution to this, this is what I found from MS help (not very helpfull)
A file's permission may differ from the containing folder if one of the following conditions is true:
A friend of mine gave me a few computers- because his office was upgrading all of their systems- I reformatted many of them and installed windows me (they are too slow to support xp), but I am having a problem with one. Originally it had windows 2000 pro as the os( I didn't have the password to log-into the computer) So I ran fdisk, formatted the hard drive, then tried to install the new os but I keep getting the error message upon booting that "invalid system disk, remove then press any key to continue".
I thought the cd-rom was bad so I replaced it, I changed the boot sequence, used a floppy to boot, even got the hard drive manufacturer's utility program to prep the drive for the os but even that doesn't work. Am I missing something? Does the fact that I didn't have the password to enter the computer have anything to do with this? I used this same method for installing me on all the other systems and they are fine, but this one is an issue.
You said that its a trojan. Doyouknow what I can do to get rid of it? if it is lsass do know whatthat is? im Wrote: > Are you sure it is isass and not lsass.exe? Isass.exe is a trojan. Everytime I turn my computer on Windows begins to boot but then an> error message appears that reads as: Isass.exe system Error and it says "An invalid parameter was passed to a service or function." What does> that mean? After you click ok, Windows begins to boot all over again but then the error message appears again. It just keeps going in> circles. I have no idea how to fix this. What am I suppose to do?
View 2 Replies View RelatedAn external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies View RelatedI was trying to get 2 PC's to be able to see each other in the network, and while modifying permissions I must have accidentally done something, now I (Administrator account) can't install anything cause I get the "you do not have permission" message.
View 1 Replies View RelatedI have a USB external drive. Somehow a folder on it is now a "operating system" folder. Whenever I plug in the USB drive I have to click on Tools -> Folder Options and uncheck the box "Hide protected operating system files" on the View tab, or I can not see the folder.How do I set it as a non "operating system" folder? On the properties tab of the folder, the hidden attribute is ticked and greyed out so I can not untick it.
View 1 Replies View RelatedCan cacls.exe be used to change a registry permission? It's been suggested to me to use this tool but I'm not having any luck using it on a registry key.I need to change the permissions for a key under HKLMSOFTWAREMyCompany for the group machine Users.
View 6 Replies View Related