I have an Acer laptop, this was originally partitioned as 50% (50gB) C: and 50% (50gB) D: and DVD E:I think the D: drive was completely empty.The first time I plugged in a memory stick it was assigned as E: and now after removing the stick my C: is 100 gB. and my DVD is D:Can I now get my original partitions back ... and how?And will this happen again if I plug in a memory stick
View 7 RepliesWindows won't let me partition it from disk management. I'm at lost here. I'm trying to start fresh with a new install of win xp. Got to the setup part where i choose which parition to use, but it says I can't delete the partition because there are necessary files needed on it etc. etc... So I get a win98 boot disk to try to manually format and get to the A: prompt, and it wont recognize my C:
View 3 Replies View RelatedMy computer cannot load windows because my "Windows" program is in my Hard Drive C:. The night before I accidently made E: Hard Drive my primary.
I have 2 Partitions Hard Drive C: and E:,I want to make C: drive to be my Primary,currently E: is my primary.
How do I make C: my primary with the "Active@ Partition Recovery" program or any other MS-DOS partition programs that loads from boot?
I am trying to create a Boot Disk for an NTFS or FAT Partition in Windows XP.So far i have formatted my floppy disk, but im stuck on the next step!Copy the Ntldr and the Ntdetect.com files from the I386 folder on the Windows XP Setup CD-ROM, Windows XP Setup floppy disk, or from a computer that is running the same version of Windows XP as the computer that you want to access with the boot floppy.I have found the Ntldr file and the Ntdetect.com file, but when i have copied them where do i paste them?? What do i do with them?
View 14 Replies View RelatedThe way my recovery partition works on my netbook is when it was first used (I didnt not use it first) is it creates an image of the system when all the system has been setup then when ever I have to use the recovery it used that image to just overwirte and replace everything.I have access to the partition where the Recovery is stored and I have my Recovery Disk but as its a netbook I have no Drive, I can copy the disk files onto my Pen drive (if my pen drive is big enough)
I want to know if there is anyway I can change it so I can use the recovery and do it from scratch like when it was first turned on (first use) because there are setting there and other items that I want to change. If I could do it by editing the files in the partition that would be easier but I can try and use the disk if needs be?
every time i try to install xp pro by booting from disk it tells me to pick a partition from the list. but then the list says that there is nothing there and then when i hit c to create a partition like it says to do. it does nothing. now i dont know what is causing this.
View 1 Replies View RelatedI accidentally started to install a new version of XP Home on an existing partition that had a good working XP home on it. I got to the point on the install where it highlighted the good partition and I hit "L" to erase it. At that point I stopped and tried a repair from the XP Home disk but no luck. Since it didn't overwrite it (probably just erased some pointers) is there any way to get back the good partition/OS that was on this disk?
View 7 Replies View RelatedI have a single disk partitioned into a MBR then an extended partition in 3 logical disks. (hopefully that's the right terminology).But myboot drive is running out of space.How do I decrease one drive so that I can extend mz boot drive?
View 4 Replies View RelatedComputer is running slow. The main systems files disk (C: drive) only has 8% remaining disk space. I ran a few diagnostic programs that stated the lack of disk space is slowing down my system considerably. I have another partition (F: drive) that has 50% space,Is there a way I can re-allocate that partition back into the C drive to allow my computer to function better
View 14 Replies View Relatedmy plan was to format & partition hard disk, re-install windows xp sp2.but needed to back-up my stuff, isn't working though, doesn't matter what software i try and back-up with, first disk burns ok but second disk always say's read error back-up failed. (sorry i cant remember the read error number) can anyone help?
View 1 Replies View RelatedUntil recently, my computer's single 120GB hard drive has been partitioned like so:
C: - ~5GB, active partition with boot.ini etc, used as a recovery partition D: - ~110GB, extended partition with Windows Last night I finally took the plunge and, using Paragon Partition Manager, got rid of the C: partition seeing as I never used its contents, and extended the D: patition to take up the free space created. I then made the D: partition PRIMARY and ACTIVE.To boot into XP, I then used a boot disk from here.windows started fine, and everything was dandy. I copied the BOOT.ini, NTLDR, NTDETECT.COM files across to D:, removed the boot disk and rebooted.'Invalid System Disk'. I'm still unable to boot without a boot CD.
I just installed XP on a new 106GB HD. Somehow I created a primary partition of 7.81GB letter I. That left me 141.23 GB of unallocated disk space. I've already installed my OS and most of my software and other peripherals. That's obviously used most of the 8GB of the primary. The unallocated part of the drive isn't assigned a drive letter so I'm hoping that helps me. I don't need a partition or if I have to have one a small one is fine. I thought the 8GB would be good for the OS with some extra, but I'm real concerned about all that unused space. I did a google and did learn about right clicking on the unallocated side and selecting new partition and taking it from there. I was just a little concerned about making a 2nd mistake. A little frazzled as this is all within 3 hours.
View 5 Replies View RelatedWhen I go to disk management and right click on the c drive,I do not get the option to add a partition.I disconnected from the wireless network same negative result. Started in safe mode and signed on as administrator and still could not create another partition.
View 14 Replies View RelatedYou think if reinstall with the special xp disk that came with my toshiba a70 will it automatically think I want to reset everything, reformating my hard-drive and thereby losing everything on my storage partition?
View 1 Replies View RelatedI have two computers (a PC and a Mac) and a Maxtor One Touch External Hard disk 250 GB. I would like to back up these two machines using a single external hard disk. So I have partitioned the hard disk into two and have NTFS and FAT32 as the file systems. The NTFS partition is around 163 GB and the FAT32 is around 75GB. I could successfully back up the PC into the NTFS part but have problems with the Mac.
When the hard disk is mounted on to the Mac, both the partitions appear on the desktop. The Mac OS is 10.3 and it identifies both partition correctly. It recognises the NTFS part as readonly and FAT32 part as "readable and writable". But when I tried to backup for the first time there was an error saying "insert a new disk". I tried to overwrite the contents of the FAT32 part as I didn’t need them any longer hence asked to proceed with the backup. The Mac started erasing. I thought it was erasing the files previously present in the FAT32 part but it continued erasing for some time and finally erased the FAT32 file system itself. So the icon representing the FAT32 part of the partition of the external hard disk disappeared from the Mac’s desktop......
i have found that my little bro has accidentally formated my hdd and deleted partitions also then he created new partitions and installed XP. now is there any hope or a way that i can recover my previous data ????
View 10 Replies View RelatedHi, does anyone know of a method to undo the deletion of a parittion that was deleted using Disk Management in XP? Partition Magic wasn't opening correctly, so I used Disk Management to delete a 1 GB swap (logical partition, about in the middle of the physical disk) I searched around the Disk Management tool bar and didn't see anything about "undo"it deleted instantly. No down time to process...
all located within ONE primary partition at the end of physical drive, there were 3 logical partitions: one swap, two NTFS.The two logical NTFS partitions were physically behind the swap partition on the drive. (One 12 GB NTFS partition immediately behind the swap, and a 30 GB NTFS partition behind that) When the swap was instantly deleted, it also *instantly* deleted the 30 GB partition ( < 1 GB free) It left the 12 GB NTFS partition (also < 1 GB free) alone.
Yesterday, I had to perform a new installation of Windows XP because I somehow corrupted some system files beyond repair. Now I have everything up and running anew and have made all the Windows updates and it's all honky dory. However, I just went to the Disk Managent Console with the intention of re-assigning drive letter for my storage partitions (not the one that contains Windows) and ran into a problem.I have a partition set up on my main hard disk to use exclusively for Window's pagefile. I have not yet set up Windows to put the pagefile there. This is the next partition after the primary partition that contains the OS. I wanted to set the drive letter of this partition to Z: to get it out of the way in Windows Explorer.
View 10 Replies View RelatedHide any of hard disk partition from being seen in My Computer.
View 6 Replies View RelatedIf i run fully recovered (all data in the first partition will be destroyed), can i have get my files back, because my computer keep restart with "registry file failure"?
View 1 Replies View RelatedI would like to reallocate my 2 partitions on my HDD, because I am running low on one of them . Can this reallocation be done in the Disk Management portion of XP? If so, how do I do it My C partiton has 17g and my F has 37 g. I'd like to even them out.
View 2 Replies View RelatedI'm trying to install xp home on my bros comp. he used to have win 2000 pro. I backed everything up and formatted the hard drive. (75 gig ntfs). This worked great. I pulled his hard drive out and put it in my comp (secondary) I then installed xp on it. This went fine, I was even able to boot all the way to xp. The problem comes in when I tried to move the hard drive back to his comp. I could not boot past the compaq screen. I got the error message
"couldn't open drive multi(0)disk(0)rdisk(0)partition(1)"
"ntldr: Couldn't open drive multi(0)disk(0)rdisk(0)partition(1)"
I recently upgraded my Intellimouse Optical's drivers to version 5.2. After doing this, however, I noticed that the software is automatically hiding my cursor when I begin typing. I definitely do not want this happening, and I was a bit mad to find out that the option to "hide cursor while typing" is unchecked. I tried rolling back the drivers with no luck. Microsoft's knowledgebase is of no help as usual and I am running out of options. Does anyone know why this behavior would be occurring?
View 2 Replies View RelatedThere are 4 user profiles on my computer, which runs XP Pro. For some reason, the 'My Documents' folder for my own profile no longer appears, but it's contents seem to have migrated into my daughter's 'My
Documents' folder.this possibly happened when I had the Beta version of Microsoft Spyware running, as my daughter mentioned some messages coming up to do with changing the path for 'my documents'
I used to be able to right click on a picture and rotate (either left or right) and save the picture to desktop.Now, I can't do any of that- it has cut that out of the menu. What do I do?
View 1 Replies View RelatedI can't find MS-paint anymore.When I type 'mspaint.exe' in 'run' window it returns no result.I can't find it in strat menu either
View 2 Replies View RelatedI am facing an unusual problem in my PC. Well first of all I tell you the specs of my PC. Its a P4 2.4 Ghz machine with 512MB Ram and 80G HD. I have dual boot with 98 and XP as my 2 OSs. Most of the times I am on XP but for using DOS i need 98.
The symptoms of the problem/virus in my PC are as follows:When I right click on any icon; say drive, file, folder etc. The first option is displayed as 'blank' instead of 'open'. I clicked on that option on CD-Rom drive letter by mistake and the CD Rom was not being detected since then. The icon just vanished. No Antivirus software has detected it yet (Ive tried 2)
I changed the system boot in "MsConfig" and now my sound, scanner and my printer don't work. I looked at the device manager to see if there was an error with the soundcard or something, but all devices have vanished from the device manager. I just tried to connect my ipod to the computer, and it said the software can't communicate with the ipod.
View 9 Replies View RelatedWhen I try to restore from tools or help I get no response and the System Restore tab has vanished from my Properties box.
View 9 Replies View RelatedYesterday I got onto my computer which was already on everything seeming fine, and I clicked on internet explorer to check my email then the window locked up or something and then my taskbar vanished. Then I closed the window out and my icons were gone. So I restarted my comp and now its just wallpaper. No icons or taskbar. Ive seen a few other posts on a problem like mine and tried a few of the fixes they said but none worked.
I've tried a system restore to I beleive a week earlier, some shellfix download from ftp://ftp.f-secure.com/anti-virus/tools/shellfix.reg, hitting f8 and doing a boot to when settings worked(sorry cant think of whats its actually called) and a couple other things I believe. I noticed alot of times a request for a hijackthis file is asked for so I went ahead and got that and will post. Also Im positive I have the aurora virus cuz I get all the popups that say aurora on there and I havent been able to get rid of it
How can I get my XP theme and Classic theme options to return to the pull-down menu in the themes tab of the display properties window.I don't know what I did but my pc went all funny and they just vanished in a blink of an eye. Could someone experienced in this type of problem please help me find where they are and help me return them as an option.
View 4 Replies View Related