Missing Dll File / Error Box Comes Up Saying Problem Loading Dll
Feb 9, 2009
Over a few days I had a virus, and used various scans, and now it's cleared out, but I seem to be missing a dll file.One that it said was infected (and deleted) was in WINSYS32QBIWF.dll The only thing I now notice, and don't know if it's connected, is when I open Yahoo instant messenger, and click on the name of the person I write to with this, a script error box comes up saying problem loading dll. And do I want to run scripts YES or NO? No matter what I check, the box opens, but, there is no scroll bar down the side of the box. Thus, when the conversation gets to the bottom, I have to close the IM box and reopen it again(blank) and start over.
I am running Windows Professional Service Pack 3. After starting or rebooting the PC, just before Windows completely finishes loading, I get a message stating "Error loading c:windowsozuveseb.dll"I can click past the message and work fine in Windows, but I'd like to resolve the problem.I'm assuming that "Error loading" means the file is missing. At least I cannot find it doing a search that includes hidden and system folder. I checked another XP machine, and ozuveseb.dll does not reside on that PC, either.how to determine what this file is, and where to find a replacement?
I am having an issue with my computer obviously. I have a VPR Matrix desktop FT6100 computer. It has windows xp as its operating system. We had a huge storm here last Friday causing a total loss of power. Now, when I turn on the computer I am getting the following error message: Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM then it says please put in restore cd and press "r" for the repair menu. I put in my restore cd and the options were to just do the windows xp files, No Format or Quick Format. The first option the computer said was least destructive so I tried that route and brings me back to the same black screen w/ the same error msg. I went to microsoft.com to print off the instructions for the error msg and I can't even get to where the instructions are talking about. I don't want to lose all my files so I haven't touched the other 2 options on the restore cd. How can I fix this with my system?
PC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
I have a clean drive and trying to install XP Pro and I get near the end of the install i get an error message saying to reinstall windows rootsystem32ha1.dll. I have not found any real info on the internet other than comments about it being a common complaint.
Recently, when booting up, I have been getting 2 error messages (both appear twice). They refer to files not found or missing but I cannot begin to identify the files - all that I see are a series of little squares: 7 in a row, then a space, then 14 more. I click on OK and away they go and everything else seems to procede normally. I have a Dell Dimension, Windows XP Home. A call to Dell was not encouraging - they recommended re-installing the system. Oh dear. I have Norton Firewall and Anti-Virus, Microsoft's new Anti-Spy, WinPatrol, AdAware and Spybot. I am FAIRLY confident that my system is clean, but then, who knows? I have run registry checks and let them do their business (I don't fool around with the registry on my own, I am not a trouble-maker). If I need to re-install, I will work up the courage to do so, but until then...maybe someone here has had some experience with these error messages. At least I would learn something new. For now, my system SEEMS to be working OK, but what do I know. This could be a harbinger of worse things to come.
after booting my window xp home edition says, windows cannot find cwindowskesenjangansosial.exe. What is this. Well i dont know, i ve restore and it still repeate itself.
I am trying to fix a friend's computer. When starting up, I get the following error message:Windows could not start because the following file is missing or corrupt:
WINDOWS\SYSTEM32\CONFIG\SYSTEM
but I got an error that c:windowssystem32configsystem could not be copied because it could not be found. The computer has Windows XP SP2.
I have two partitions on the same drive and both had Win XP installed. I decided to reformat the second partition, and for no particular reason decided to install Win 2000 there. Now on boot up I get the normal boot.ini menu but if I choose XP I get an error that says Win 2000 has a missing or corrupted file: WINDOWSSYSTEM32CONFIGSYSTEMd……..SYSTEMd not a misprint! I hit reset and choose Win2000 at the boot menu and Win 2000 comes up OK . I tried to repair 2000 and I re-installed it but still get the same error. I tried modifying the boot.ini file but it didn't.
When the computer tried to load into Windows I get a message saying that the WLDAP32.dll file is missing and that I need to install it. The computer will not load into any mode, including the Safe Mode. I then tried to load the file from the XP install disc and was told on a blue screen that Windows had to shut down due to not wanting to damage the computer. So, I cannot load into Windows in any mode and I cannot get the file from the Install CD.
I have an old computer with an Intel Celeron 467 MHz processor, 128 ram and I'm running Windows XP SP2. Earlier this week I came to turn on my computer, and could not log on to Windows. "Windows could not start because the follwing file is missing or corrupt Windowssystem32configsystem." I reinstalled XP. I couln't access the repair install. Then I thought maybe someone had gotten into my computer and I downloaded Zone Alarm...Big mistake. Since then my computer freezes, programs jam, I keep losing my internet connection,(DSL) and I get "cannot find server" messages. Its also slower as molasses in winter. A little better since the removal. Obviously Zone Alarm was removed and i went back to Windows firewall. I also use Ad-Aware, AVG, Spybot Search and Destroy, Spyware Blaster and I use Registry Mechanic and TuneUp Utilities.
whenever I boot the system, I come up with the following message: Windows could not start because the following file is missing or corrupt: <Windows root>system32 toskrnl.exe re-install a copy of the above file. every time I try to boot the CD, the same error message occurs. I've already tried to change the boot order so the CD-ROM drive would be first. I have also selected the CD-ROM drive to be the boot device, but the message always pops up.
I am helping a friend with his computer and after running norton systemworks it says that he is missing mscoree.dll and some things might not operate right without it. now that I have downloaded that file, where do I put it?
I have a desktop pc with XP Home Edition. It's an HP and it looks like there are two operating systems on it. One is the regular XP Home Edition load and the other seems to be the Recovery one if you run the Recovery utility that HP offers at boot up. I'm not sure what to do to fix this. If I try to run the recovery from HP it says that some data might be lost which I do not want. Is there any way to fix this hal.dll file using some type of utility disk? Or any other way?
I get an error on boot up telling me that the config file is corrupted or missing. IT also states to please insert CD to try and repair this problem. Press "r" before the first screen. If I do that will it try and reinstall XP? Will I lose all my data?
I bought a faulty laptop off my friend assuming that it just needed a fresh install off Vista, I installed Vista and now on bootup i get the error saying a file is missing, the file is usually "winload.exe" but can sometimes be other files which I cant remember the name of. Some times Vitsa will load up fine and the laptop would be perfect, but 90% percent of the time i got this error, whichis really boggling me.
I then tried to do a fresh install of XP, during the install I get a blue error screen, saying there is something wrong with my hardware and to run fdisk on my hard drive. I couldnt do this due to not being able to boot up so I bought a fresh new hard drive trying to fix the problem. I installed this HD and started the XP installation again, I am still getting the error message and I am stumped on what to try next.
I have been trying to fix this computer for quite a while. I am having some probs. When I boot it up now, it comes up with an error Quote: Windows could not start because the following file is missing or currupt. WindowsSystem32Configsystem I do not want to reinstall Windows but IF I must I will. If there is a way to access the data I need some pictures off there.
I am using your prscribed approach for attacking an error message: "Error Loading DOCEOC16B1". According to your directions I'm to send you the following notepad file from Hijack. I'm new to this so I'll leave this in your hands.
Best regards...rob graber
Logfile of HijackThis v1.99.1
Scan saved at 12:44:21 PM, on 6/8/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Due to lapse of sense at a particular moment on my part, my DELL Inspiron laptop was not protected when accessing the internet for a download. Windows XP is the operating system. When booting up, error message states that the following file is missing or corrupt: <Windows root>system32hal.dll Please reinstall a copy of the above file. I've tried numerous programs and software packages that "guarantee" results but none have accomplished anything except wasting my time and money.
what i would like is a step by step of how to repair this problem i have tryed copying this file from the xp disk to copy ntoskrnl.exe as follows e:where e is my cd drive e: copy e:i386toskrnl.exe c:windowssystem32 and it tells me file cant be found but when i do a dir e:i386 it gives me the file.
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
Get message "Cann't find import;dll may be missing, corrupt or wrong version file "RTL70.BPL", error 126. Trouble shooting steps taken - 1. Turned off System Restore, 2. Ran Disk Clean Up, 3. Ran CW Shredder, 4. Ran Ad-Ware, 5. Ran Spyware (Spy-bolt, Microsoft Antispyware), 6. Ran AVG Antivirus, 7. Rebooted in the Safe Mode, 8. Reran steps 2-6, 9. Rebooted in the Normal Mode, 10. Turned System Restore back on. Still get warning message.
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message.... Windows could not start because the following file is missing or corrupt: windowssystem32configSYSTEM Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair. So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts. I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
All of a sudden I cannot boot up my Toshiba laptop (2.3mhz pent4, 512 RAM, Windows XP Home with SP2). I get the error message "Windows XP could not start because the following file is missing or corrupt:C:windowssystem32configsystem".By hitting the F8 key when starting I can get the start menu and I've tried booting into safe mode and I've tried "boot using last known good configuration" - but still get the same error message.
after installing acrobat on my machine, I realised that my FILE print port for postscript printing had been deleted. Need help to reinstall the print port.
I can't install my printer because this file is missing or not right. I tried another solution, but my RunOnce file is not missing. Can anyone help? Windows XP OS trying to install a HP D4160 printer.
was getting a blue screen 07A was told by computer techs without looking it was either my hard drive or my operating system. Checked my hard drive several different ways and no problems. So I went to do a Windows XP repair instead of complete reinstall as they are a pain. After a long time it came back that couldn't do this because SPCMDCOM>SYS file was missing and couldn't repair from recovery console without it. My hard drive was replaced by Dell in July of 05 I think. What can I do without going to extremes? Secondly can I install my cd/dvd rom on my other Dell PC with discs I already have? I am very aggravated. I want to try to save at least 1 computer. On the 1st PC about 2 months ago I had my 17 inch flat panel go out it starts but then go black, I am using the 2nd computers screen!
I started receiving at startup the following error: "Data Execution Prevention - To help protect your computer windows as closed this program Name: Windows Explorer Publisher: Microsoft Corp" I had gone to MyComputer, properties and put windows explorer in the exception list. And it loaded up ok after that. This morning it started giving the same error plus another one: "DrWatson Postmortem Debugger has encountered a poblem" and has closed. In addition to the above, I can't click or start anything. The screen looks like it's loaded up correctly but then I am not able to start or use any program.only option I can choose is to see the task manager. Now the screensaver has come on and moving the mouse doesn't take it back to the normal screen. I really am not sure what the problem is I am writing this post from another PC.
I had a .dll file disappear due to the loading of a new video driver. I have googled it and downloaded it, but I don't know where to place it within my windows directory tree in order to solve the problem. I have tried to place it in the windows root directory, the windows/system directory, and the windows/system32 directory, all to no avail. The .dll file is MSVCP71.DLL.Can anyone point me in the right direction?
