I recently got the 'blue screen' on my IBM NetVista. various tech people and was told that 1.) my hard drive was gone; 2.) a bad virus had taken over the 'puter; and various other things. Being stubborn Scots-Irish, I decided to see what I could do before I gave up.
Started computer again, tapping the F8 key while it was booting up......ran all the system diagnostic tests and passed them, so I knew it wasn't the hard drive. Finally got it to boot back up, but of course, had lost all my data; ran all my recover info and got everything back except my 'Record Now' feature, which allows me to make data discs, copy existing discs, It should have been on one of the original discs that came with the computer, but I can't find it.
Problem is, I want to save all my documents, games, addresses and such as back-up. How can I do that without my Record Now feature?
Is there a way to find that specific program on my Recovery discs and install lit to make my back-up copies? I haven't tried to copy to the floppy discs because it takes so many of them.
I was cleaning up my Dell 150D 1.33 mghz Desk top computer with windows XP Home edition. As I logged back on I click on User icon and the screen turns blue and never progresses any further. When I use ALT-CTRL=DELETE, it shows task manager running and continues to cycle in Kbs used. Can I restart and use set up F-1 to correct.
two days ago i used my computer, i turned it off and took it back home from office. the next morning i tried to turn it on it flashed the blue screen and restarted. Now I am no computer expert so I don't know why this has happened all i can tell you is that it worked the night before i didn't download a thing and then it stopped.
can anyone could help me?My computer is an IBM laptop. It has windows XP installed and its very helpful but soo annoying. I have all my photos on it..anyone who answers and remember; i am not very computer smart so easy words!
1.I have a dell digital jukebox mp3 player that allows for storage of data or music. I tried to copy a 600mb file from the mp3 player onto my hard drive. I had a little over 600 mb of space left on my hard drive (a total storage capacity of 6GB). It said i had run out of space. So i deleted some files, move some things around and i had 1.1 GB of space free for this transfer. i tried again and this time again the message i got was not enough space on drive c:/. So i cancelled out and checked to see what i had on my hard drive, 500mb free!!!?? So i have lost hard drive space and not gain a file...So i investigated and found that i have 1.81 GB of data on c: documents settingsuser. but once i get into user, i have 6 folders none of which display nearly that much data. They are, favorites, start menu, cookies, desktop, my documents, and a file named ntuser. the ntuser file is 1mb, and my desktop has 700 or so mb on it. So my question is how can i get back this lost hd space,
2.Blue screen. Im on xp pro sp1, i use adaware, registry mechanic, and im generally tidy with my windows; note, reinstalling windows did not solve this. I never used to have this issue, but lately when i go to open or close certain programs i jump to blue screen. it references trixdp.dll i think it was, and then "begin physical dump of memory" i must reboot at this point. I use VLC media player, and exiting this program mandates a blue screen. Just now i exited mozilla browser and this was the first time i got blue screen from this program.
My wallpaper has disappeared even though it appears under display properities-themes. Under the desktop tab my wallpaper is set correctly. When I try to change the theme from modified theme to windows classic the change is not accepted. My screensaver was the picture slideshow and is now windows xp moves across the screen as the screensaver. When I try to change it back the change is not accepted.
This all started because I am trying to back up my computer to an external hard drive and keep getting error message "windows delay write failed". I tried updating the hard disk driver but there wasn't any update. While searching for fixes for that problem, I came across Panda Software online virus checker. I used it and it deleted a few viruses. They were all old, some may have only been unopened email attachments and they were all from 2001 and 2002. Two days later, I was using logmein - remote access and while rebooting (not the first reboot) I got the blue screen. Here's the error message.
Driver_IRQL_not _less_or_equal stop:0x000000D1 (0x502F1F70, 0x00000002, 0x00000001, 0XF398B203) VSDATANT.SYS - address F398B203 base at F3966000, Datestamp 4313a6c6
So I looked up vsdatant.sys which is located in system32 directory, and I changed the name of the driver to vsdatant.old but then my zonealarm stopped working so I changed it back.
How do I get my display working properly? Any ideas on the "write failed" error message?
I have replaced my harddrive and do not use my cd writer anymore. It has not worked in 2 years and I save files to the USB memory sticks. Is there a way to make restore "disks" without using cd's?
How do I format (or erase?) cd's that have info on them using XP? The help screens do not seem to cover this. My cmputer has a dvd-rom and a dvd/cd writer.
Since a short time my both players do not knoe an empty CD or DVD.Every re-writable CD or DVD they recognize but noe an empty.Who can help me or have has the same problem
I have windows XP installed, service pack 3, and fully updated. As is all my anti-virus software etc, etc.My PC had a DVD Rom drive and a CD RW drive. I have just installed a new LiteOn DVD writer, making 3 drives in total. Everything works absolutely perfect. I can copy DVD's on the fly from my DVD Rom, and every other aspect of my PC is fine. All three drives work great. Except, now, my PC won't hibernate! It use to be able to robustly carry out this function with no issues. But as soon as I installed the DVD Writer, it will no longer work. I can make the PC hibernate manually by going to the computer 'turn off' option, and click 'hibernate' but it won't automatically do it after a set time. I have played about with the hibernation settings for ages but it makes no difference. How can I make my PC hibernate automatically like it use to?
I need some links to some sites that will provide information and also fixes for blue screen errors in Win NT/2000/XP. I will be using them on my website, which in turn will be used at my workplace. Thanks for any help that you can offer.
my computer with xp was running fine until i found that it was not showing my cd drive. I've checked the neccesary connection and they were all fine. the device manager shows the drive with a yellow sign giving error code 39 which says that driver is corrupt or missing. now my cd drive is a plug and play and does not have any driver bundled with it. uninstalling and reinstaling the drive wont help. xp detect the new hardware at the start up but again same problem.i wanted to reinstall xp but since cd drive is not available i tried to run it from hard disk. but it too was not running.
My Dell Inspiron 2650 laptop on boot-up consistently gives a blue screen with ERROR (0X000000ED (0X81ACA988, 0XC0000006,0X00000000,0X00000000). I have read most of your fixes BUT in my case no matter what I do it ALWAYS boots to this screen. Trying to boot to Safe Mode results in a list of drivers prefixed by ?multi(0)disk(0)rdisk(0)partition(2)c:windowsdriver.sys etc The machine will not boot from Floppy or CD and I?ve tried every combination of boot sequence under the F12 menu. In the BIOS it will not allow me to change any relevant settings, only the ?system date?, ?system time? and ?quiet boot?.and I cannot select the dropdown menu items either. Booting under Normal Startup, I see the Windows Logo and all that, but then the blue screen appears. I?ve tried removing the hard disk to get it to boot to floppy, removing the battery (which is totally dead), memory module, etc. Only thing left I think is to sling it in the Caribbean Ocean and go drink a bottle of rum.
i want to watch a movie on my desktop it cannot play dvd with audio..it comes that when i open my dvd ram it displays 2 folders audio and video..and in auto play it plays no audio and the player saids unknown dvd
My fax printer driver must have become corrupted because the console said there was no printer driver installed. I went to Add Windows Components, added Fax again and nothing happened. Went to Printers/Add Printer and let the wizard add a fax driver and it came up with a Microsoft Office Document Image Driver on LPT1. Fax Console still complains there is no fax driver, so I'm assuming that's the wrong printer driver.I'd like to force the install of a printer driver but I don't know what port it's supposed to be on and where to go to look for the driver.
so every time i boot the computer i get that good ol' blue screen of death right where windows should open to my desktop.. instead it says "welcome" with the light blue background.. the screen goes black and then comes back with the blue screen.. the message on the screen says:
stop: 0x0000007a (0xe16dac70, 0xc0000185, 0xbf985c66, 0x20e18860) win32k.sys - address bf985c66 base at bf800000, datestamp 41107f7a
beginning dump of physical memory dumping physical memory to disk: and counts up to 100 then the computer restarts. i was able to get into safe mode to try a system restore but when the computer restarted it never finished the install (it actually gave me the confirmation that the restore was successful while i was doing a repair install later on) i have tried going through the windows install disc repair utility and doing a chkdsk /p and a chkdsk /r upon doing /r it froze at 53 percent and did not move (i left it for a good 4 hours the first time before restarting it.. and then over night the second time.. and both times it never passed 53 percent............
A few months ago, I thought my reliable internal DVD writer was finally on its last legs. When I would play it, it would stutter, play a DVD disk slightly at less than normal speed, and the audio had a slight echo to it. So I bought a new one (an LG). After 4 months, it had the same problem. I replaced it. The new one has the same problem. My external DVD writer seems to work fine. So, rather than the writer, I think it might be a driver issue?
I have put a DVD write drive in a dell computer now I am getting 3 short beeps when I try to boot up and it does not boot up. But if I leave it off for a few minutes it does boot up and works normal. I did put another memory stick in but it was beeping before this. Could it be anything to do with the power supply atx psu 250? I am not on it at the moment I dont know what type of bios it has. I have checked the two drives both seem ok when singly attached I did not need to but I have checked the memory 1 stick at a time seems ok. the other drive is a dvd rom plays but wont burn. Could it be a faulty EIDE cable I got a new one with the new drive but I did not use it.
My laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
when I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
I have a celeron/p4 machine with 256 RAM and 160 G Hard Disk. Well i installed a service pack 2 for xp. After installing my screen freezed so i restarted the pc and I got a blue screen. What can i do please?
I have a new Toshiba notebook running windows XP Home SP2. I set it up with two account users. I eliminated the welcome screen so that the primary user will be logged on automatically on power on. This turned out to be not a good idea because the primary user must be logged on before the secondary user can log on and I can't get the welcome screen back. I have it checked in both user accounts as well as fast user switching. I don't remember how I eliminated it in the first place so I can't remember how to get it back. Any suggestions?
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
I was playing a game and I rebooted my computer. When i went to start it it went to the a blank blue screen before the account screen in the beginning of XP. I know i can restore to new but i will have lost so much information that it would take about 3 months to retain it all back. It says it can not find operating system. I need help in a serious way. all advice and solutions are requested.
Encountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
i'm having to boot into windows xp. on power up sytem goes through the windows xp splash screen (with progress bar) and then instead of login prompt it goes just into the blue screen with moveable mouse pointer arrow.
issue seems to be similar to: http://forums.techguy.org/windows-nt...o-startup.html http://forums.techguy.org/windows-nt...p-problem.html but recommended solutions didn't help so far.
symptoms just before issue - was not able to run use some system features - utility to turn off the display, utility to bring up battery info - everything was working fine before this
what i've tried: boot to Last Known Good Configuration - resulting in the same blue screen
boot to Safe Mode / Safe Mode with networking / Safe Mode with comman prompt - resulting in blank (black) screen with "Safe Mode" in the corners and moveable mouse test the hardware (hard drive / memory etc.) via build in PC Doctor - all seems to be working i am able to use bootable XP CD from other machine to get into Recovery Console i am able to boot to simple live XP using BartPE-XPE usb key and access the hard drive
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
My dads pc was fine then all of the sudden it just restarted.And it came up to the options:restart in safe mode estart in safemode with networking estart in safe mode with networking Last known working config Normal But when he tries any of them.. None of them work The windows loading screen will come up flash a blue screen super fast (cannot read it no matter how hard i try) then go back to boot option screen.
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
