I just did a repair install of XP and now my D: drive doesn't show up in my computer.I can still boot from it (knoppix live cd) but nothing else.For some reason windows isn't seeing it. Any sugestions? This is a cd-rw/dvd drive.
View 8 RepliesXPpro with two HDs, CDr/w and DVDr/w.(D AND (E are (were?) a 20G drive which I partitioned over a year ago. This morning I came across a 4G drive in an old box. (really). Being a curious type I pulled the power and ribbon leads from the DVD and plugged them into the 4G HD, after setting the jumper to slave.Then switched on. A dos line appeared saying 'automatically configuring an F: drive' After which Windows appeared to boot up normally. Except that 'My Computer' showed no (D The 4G (F drive showed as not formated. So... I removed the 4G and replaced the leads back to the DVD. My Computer' shows 3.5 floppy Local Disk(C FRSTHAFOLD(D 9G abt Notice NO (E
Not only that but my D drive is missing lots of files and folders wont open. It seems that the partitioning has been forgotten! I have checked what bios settings there are (not many on Compaq 5000) And the bios sees my main Crive and only one 20G disk I have a bad feeling about this Is there any way to get things back to normal?
I just lost a very important folder and don't know where to look to see where it went. I was saving some fonts in my fonts 2 folder and all of a sudden it just disappeared. What did I do and and anyone help me get it back
View 2 Replies View RelatedWhen cleaning up a Dell 8200 we apparently deleted a need driver? I have tried to use Dell's support to build a flash enabled floppy with the downloaded driver on it. This failed. Without the drive I can not reload windows xp home to correct the problem. Any suggestions would be helpful. System restore has not helped either.
View 14 Replies View RelatedI recently defragged my computer a few days ago. I started out with 14.9GB left on my C: drive (total capacity is 69.7GB) and ended with 3.2GB! I was highly upset, I don't know what could have gone wrong to cause my free space to almost completely deplete...does this usually happen? I also want to know if i can get my space back, and what I can do.
View 5 Replies View RelatedTrying to help upgrade my hard drive. I have a Local C drive 20 GB and I have a Maxtor 120 GB in my E: drive. I have previously sent an exact image copy of my C drive to my E: drive using Norton's ghost 9.0 symantec. Since he has tinkered with my Hard drive it is not even recognizing a file system at all. It asks if I want to format the drive and I know that will wipe it out completely if I do that. The exact warning or prompt that shows goes as follows. The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and the volume is not corrupted. I run windows XP home edition and my computer is a pentium 3 300 SE by gateway.
View 20 Replies View RelatedI'm hoping someone can help me with this. I recently replaced a bad motherboard which forced me to wipe my hard drive since it was set up in a raid format. I currently have 2 120GB hard drives which is equivalent of about 198GB total.When I reinstalled Windows I made 1 partition of about 30GB for Windows and other programs only and created the other partition with the rest of the hard drive without really looking at the GBs avail on it. Once Windows was installed I noticed that the 2nd partition only had 120GB giving me 150GB total. I booted from the Windows CD again and did not see any unaccounted space from the hard drive.
View 9 Replies View RelatedI just noticed that I don't have my D drive listed under My Computer. Is there anyway I can get it back outside of System Restore? I'd just had to use that to undo some updates.
View 8 Replies View Related1.I have a dell digital jukebox mp3 player that allows for storage of data or music. I tried to copy a 600mb file from the mp3 player onto my hard drive. I had a little over 600 mb of space left on my hard drive (a total storage capacity of 6GB). It said i had run out of space. So i deleted some files, move some things around and i had 1.1 GB of space free for this transfer. i tried again and this time again the message i got was not enough space on drive c:/. So i cancelled out and checked to see what i had on my hard drive, 500mb free!!!?? So i have lost hard drive space and not gain a file...So i investigated and found that i have 1.81 GB of data on c: documents settingsuser. but once i get into user, i have 6 folders none of which display nearly that much data. They are, favorites, start menu, cookies, desktop, my documents, and a file named ntuser. the ntuser file is 1mb, and my desktop has 700 or so mb on it. So my question is how can i get back this lost hd space,
2.Blue screen. Im on xp pro sp1, i use adaware, registry mechanic, and im generally tidy with my windows; note, reinstalling windows did not solve this. I never used to have this issue, but lately when i go to open or close certain programs i jump to blue screen. it references trixdp.dll i think it was, and then "begin physical dump of memory" i must reboot at this point. I use VLC media player, and exiting this program mandates a blue screen. Just now i exited mozilla browser and this was the first time i got blue screen from this program.
I have a 60 gig hard drive and after i did a system recovery i only had 12 gigs free on the hard drive
View 3 Replies View RelatedI started another thread a couple of days ago but have progressed a bit since then so thought i would start a fresh one.I have recently formatted my hard drive and lost drivers for my soundcard. I have been onto my motherboard manufacturers website and downloaded the appropriate driver. This worked (or so i thought) the ?Media Controller in device manager disappeared and my soundcard appeared. Media player plays CDs now, as do all my other sound related programs. The problem is i still can't hear any sound!
View 6 Replies View RelatedToday I noticed that what WAS my E drive is now called F and what was my F drive is now called G. I don't know how it happened, but it's wreaking havoc with Adobe Premiere because on all old projects I have to relocate all files on what were F that are now on G. It's also messing up my shortcuts.
I am try to two partition drive C and drive D in my computer but only one c or d instoling. i have 4000mb hardrive,please tell me how can i instol partition in my window xp professional.
View 1 Replies View RelatedI had to buy a new Hard drive and installed it into my computer.also have a slave drive that is much smaller. the slave drive has always been drive e: or drive d:. But for some reason after I re-installed windows and ran it, it now made my slave drive into drive c: and my master drive into drive e:! How do I switch the two? The slave master is set up properly in the BIOS. The large drive is the master and the small drive is the slave. But how do I assign the c:designation to the large drive and the e: designation to the small slave drive.
View 2 Replies View RelatedWhen installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
View 3 Replies View RelatedI use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
View 14 Replies View RelatedMy office has a number of mapped network drives for each user which, unfortunately, start at drive letter F.Each time a USB device is used on the computer it is also automatically assigned the drive letter F (presuming that C is hard disk and D and E are CD/DVD drives). This has to be manually changed from within Disk Management.Apparently this is as a result of physical drives taking precedent over the mapped network drives.Is there any workaround for this other than moving the mapped drive letters further along in the alphabet? - this is not really a feasible solution at this time.
View 4 Replies View RelatedA little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
View 7 Replies View RelatedA friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
View 14 Replies View RelatedThis is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
I had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
View 2 Replies View RelatedAfter working for sometime with Maxtor One Touch II external drive, I have experienced the following problem: If the computer is left for some period of inactivity, for 1-2 or more hours (the light on the drive is on and not blinking) I cannot access the drive and the OS message is "One touch is not responding". The only remedy is to restart the computer. My System consists of: WindowsXP SP2 and 512 MB Ram The Maxtor OneTouch II drive is connected via a firewire inlet of the computer, the file system being NTFS. The drive is partitioned unto 2 logical drives (~150 GB each)
View 3 Replies View RelatedAfter reformating my pc, my secondary hard drive is now designated as drive "D". Before the reformat it was drive "G". I have software that needs to get data from drive "G" but the drive is not designated as "G" any longer. I can't remember how to reassign the drive letters so that I can designate the secondary drive as "G".
View 2 Replies View Relatedi screwed up my registry, and of all things it was the keyboard driver or something, so theres no hope of fixing it on my computer. ive got the drive hooked up as the slave on a different computer, but i cant figure out how to edit the registry on my drive rather than the primary drive. is there any editors that will open it from a file? any way of decompiling it? theres got to be some way to edit it. also, they are both xp.
View 4 Replies View RelatedWhenever I open up My Computer and browse Local C drive, it takes at least 10 seconds to open up a single folder. I did chkdsk /f /r thing and found no errors on my C drive. I am also possitive that my PC is malware free.
View 14 Replies View RelatedI have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
View 2 Replies View RelatedI have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
View 10 Replies View RelatedI have 69.1 memory free from 74.5 and i noticed no matter how much i delete i cant get up into the 70s.For example this month i have deleted a ton of music files that came up to about 400mb,Then a few programs that were around 50mb each and still nothing .If anything it seems i am going down in memory instead of gaining from deleting these programs.
View 14 Replies View Relatedi connected my external HDD to my system i copied some data but now i'm not able to open that drive i have partitioned the 160GB drive to 8 20GB drives bcoz i have very important data in that drive
View 9 Replies View RelatedMy external drive has always been "E" and I have several desktop shortcuts that relate. Recently I inserted a flash drive containing home movies and after viewing and a reboot later I noticed that my external drive is now shown as "New Volume F". I would like to change it back to "E"
View 5 Replies View Related