I have searched the forum and have found all comments posted to be pointin towards repair XP. Though this is an ancient decktop that i have no idea where the XP CD is. All i ran was avast preboot virus scan and this has happened.
View 3 RepliesCurrent situation: When Windows XP boots it displays Windows logo, black screen and then a small error window with title "User Interface Failure" and text "The logon user interface dll msgina.dll failed to load. Contact your system administrator ..." There is a button to restart the system. Booting causes a loop back to the same state; I cannot get the system to boot to safe mode. Other than the lack of a logon and desktop the rest of the boot process seems to continue OK; I can access network shared drives from another system. Using BartPE I can see that msgina.dll is in C:windowssystem32 as it should be. Unfortunately much of the data I need to access for my work is not on shared drives and cannot be accessed by BartPE so I am in big trouble.
Background: The express version of SpyCatcher was installed a few daus ago. All was OK until I restarted the system and arrived at the current situation. I also have BartPE which I have used to look at the SpyCatcher logs and found entries that msgina.dll was quarantined (along with many other safe items). I believe this is the cause of the problem and not anything else.
I can't get past the box that says"Logon User Interface Dll Msgina.dll failed to load. Contact your system administrator to replace the dll or restore the original dll."
Does any body know how to replace the original dll? I tried to run a system recovery on my laptop but I dont know the keys to use.
He is running xp pro and when we start the computer up this is the message we recieve - User interface failure. The logon user interface dll msgina.dll failed to load. Contact your system administrator to replace the DLL, or restore the original DLL. I found this at Microsoft.com http://support.microsoft.com/kb/836683/ and followed the instructions, but when we go to last known good configuration, we recieve the original message again. I've tried to boot in safe mode, and recieve the same message. I searched the forum and found similar cases, except that he does not have a recovery disc. He doesn't know whether the system restore was enabled.
View 7 Replies View Relatedi had this problem before and it somehow magically fixed itself, unfortunately it failed to do the same for me this time. dont really no how to describe it, it "loads" windows xp then diesthe screen works and everything seems to be plugged in correctly is this problem due to lack of memory.
View 5 Replies View RelatedI have XP Entertainment Home Edition. My system boots up to the user profile screen where I can choose between the two profiles If I select either profile a blank desktop appears (no icons/no windows task bar) and freezes Trying to boot into Safe Mode also hangs after choosing a profile. It's a Dell so I don't have the XP cds to try a repair. I do have other computers with different versions of XP installed that are working fine
View 2 Replies View RelatedMy system uses Intel 810 Motherboard and Penitum -3, 800MHZ processor. I have Windows XP Professional installed. My problem is that the system has slowed down very much. It takes a very long time to even load the interface fully. Most of the programs in Startup (MSConfig)also do not load. I have recently installed Norton 2005. I have scanned the system for Trojans, viruses, SpywareAdware etc. But nothing shows up. Is it because of NAV?? MSConfig/Startup also does not have any unknown entries.
View 1 Replies View RelatedThe Explorer program (%systemdrive%program filesinternet exploreriExplorer.exe) creates the familiar Windows interface, but you can use this setting to specify an alternate interface. If you enable this setting, the system start the interface you specify instead of Explorer.exe.To use this setting, copy your interface program to a network share or to your system drive. Then, enable this setting, and type the name of the interface program, including the file name extension, in the Shell name text box. If the interface program file is not located in a folder specified in the Path environment variable for your system, enter the fully qualified path to the file.If you disable this setting or do not configure it, the setting is ignored and the system displays the Explorer interface.START > RUN > GPEDIT.MSC > USER CONFIGURATION > ADMINISTRATIVE TEMPLATES > SYSTEM > FIND CUSTOM USER INTERFACE > RIGHT CLICK > PROPERTIES > CLICK ENABLE > FIND AN ALTERNATE USER INTERFACE > OK
View 9 Replies View RelatedHave not done any updates lately, nor anything unusual, however, suddenly laptop displays two error messages re/Win logon.exe and Isass.exe failure. Part of the solution noted in the forum was to restart "using last known good configuration", but this doesn't work. It simply attempts to start again and comes up with the error messages again.
View 5 Replies View RelatedI'm posting this as a help guide for all those out there who have had Windows explorer.exe start doing crazy things. I'm the go to guy for tech problems amongst all of my friends and I've discovered that I'm not the only person with one of these explorer.exe bugs.Firstly I know that explorer.exe is the Windows service controls the UI and allows you to browse files, have icons on your desktop and have a taskbar. However of late bugs have been appearing that are causing it to malfunction in ways that shouldn't be possible.
View 14 Replies View RelatedIn recently restoring my crashed machine, I noticed that when the machine was
idle, it would go back to the user login screen. I found this tedious as I
just wanted it to go to screen saver but stay within the user session. I ran
'control userpasswords2' and de-clicked 'Users must enter a user name and
password to use this computer.' (It's a home computer so not worried). Now
when I reboot, it brings up a Windows login for Administrator and says,
"Unable to log you on because of an account restriction." I can bypass that
and log in as Owner or anybody else so it's more cosmetic than anything else.Question - who is this "Administrator?" The account doesn't show up under
User Accounts. 'Owner' is the Administrator. Do I care about this account
(which appears to be hidden? Should I allow it to log in under the covers? If
so, do I have to re-click 'Users must enter a user name and password, etc."
My windows xp dell pc is not loading up the user login screen. The hard drive sounds like its trying to load something but failing. Then i can only get onto the login screen after various attempts at restarting. Is there a way to fix this non loading user login screen.
View 14 Replies View RelatedI have installed a new hard drive due to a catastrophic failure. I also purchased a new install CD of XPP sp 2. Upon completion of the NTFS format and OS installation, the final system restart shows the Windows logo then I get the blue screen of death.
Windows login failed...C000021a status 0X000012f.
Thanks for oppening the topic but now my problem is not here .l'll re-type the problem .Im running win2k pro and now when i right click on a desktop icon or any other icon i get ":Failed to load resource DLL" with no explanation of what dll is missing or corrupt .Once i press 'OK' the problem goes away and everything seems to run fine other than a few exceptions that im not sure are tied .My friend says he had the same problem and a week after ignoring it his pc crashed and died.
View 14 Replies View RelatedI am using Microsoft XP with a dial up connection. I use Earthlink mail and any time I try to access mailbox i get this message. It appears that my driver is corrupted or otherwise unaccessable. I began having this problem after running Obits Advanced System Care. I have restored changes made by the program to no avail. Can someone tell me how to reinstall this ODBC driver or access it. I am able to access my email through web mail.
View 3 Replies View RelatedPC is left on pretty much all the time. Whenever I have to restart it for whatever reason it restarts normally, loading XP relatively quickly. However, if I have to shut it down for even a few minutes, Windows will typically fail to load most of the time. Usually it will hang on the black screen with the white progress bar, or sometimes on the loading xp screen. At this point it will sometimes start up when I reset it, or it will show the "Windows failed to load normally" screen. If I then start in safemode then restart it usually works, or even if I choose "start windows normally". I'm not sure if this is a driver or hardware/bios issue, I have reformatted once, and restored the OS using my XP disk a couple of times but the problem persists. I keep most of my drivers up to date. Tools like Sandra don't report any major errors (from what I understand anyway). I have just ordered new RAM, as I thought this would sort the issue, but it hasnt. I have to run my memory at 100hz so it will boot without any problems . If I run my processor at 200fsb then the computer doesn't boot and it doesn't start.
View 7 Replies View RelatedWhen I look in the event viewer I can see above error message.Are these drivers not loading due to programs being updated or has something gone wrong with my system? Below is the list of files not loading.I have checked quite a few of these files and they are present in my "System32/Drivers" file.
View 1 Replies View RelatedI come across very strange problem. Last week my machine running XP Home was infected by 'Boot.Mebroot' virus which curropted my boot configurations and my machine was getting restarted upon loading windows. I tried all the options but no use. Then I re-install (Upgraded to) XP Professional with complete installation without reformat and updated to latest SP3. It went fine, I ran Symantec and found the bugger and kicked off from my machine. Then I started Windows Live update as I want to bring my PC to latest patches. All the updates got installed without an error (about 58 updates most of them were security update, SP3 and IE8). As soon as I restart my machine it shows the same behaivour. It get restarted. I Repaired my XP professional three time now.
Why I am accusing MS XP Update for all this because Last night everything was running absolutly perfect, I started the update it showed me 58 updates. All update gone successfully. After finishing the the updates I simply restarted my machine and it failed again and restarting again and again. It shows me F8 boot options and I tried all but same. So I repaired this morning again. I tried the 'fixmbr' command in recovery console and it displays the dangerous message that 'This machine boot have some problem' but if you ruin FIXMBR you might loose the partition and stuff so I didn't run it as I have very important data on my disk.
I am getting the following message when trying to clean out the recycle bin Explorer.exe fatal application exit Failed to load application texts immediate exit
The menu bar doesn't work or when you right click with the mouseI'm running xp home with sp2 installed
I've tried almost evrything to get my java to install. I even tried registering the DLL's manually. That way was working find until I tried to register "regsvr32 Msjava.dll" and i just get "Load Library failed "cannot find Msjava.dll module." I've just about given up. If anyone has a clue on how to get this module,
View 1 Replies View RelatedTo start, when I try to play an .avi file, real player and windows media player both encounter a fatal error. Thinking there may have been a windows update I went to update.microsoft.com to get updates. I was able to download all of the updates, but I could not install any of them. I tried to install them via express and custom updates on the website, via automatic updates, and virtually every other method I could think of. After researching the problem I came across similar problems with an array of solutions, including trying in safe mode, running sfc /scannow, uninstalling and reinstalling .net, shutting off and turning back on both automatic updates and cryptographic services, changing .dll files (lccwiz & pidgen), renaming the Software Distribution folder, downloading one update at a time, and other things that I can't even begin to think of at this moment, obviously with no success, as well as running SpyBot, AdAware, and Norton.
View 4 Replies View RelatedI have a Dell laptop that I have tried many times to password but it sort of doesn't work.The laptop has Windows XP Professional on it, Version 2002 with Service pack 2.My husband bought it from a buddy at work who's wife wanted a laptop, but then decided she didn't like it. She didn't delete her account so it's still under her name.I have set up a user account in my name on it and passworded it. When I reboot the laptop, it goes straight into "her" account. I want the screen where it gives me the User names so you have to type my password in order to even access the laptop. It always totally bypasses that screen.
I tried setting up a dummy account and turned on the Guest account and rebooted the laptop. I STILL don't get the User login screen.I really want this to work because for 1. the laptop is being used only for backing up personal family pictures and I'd really rather be able to password my children out of it and 2. when I go to my girlfriends' house, her mother seems to think she can just help herself to my laptop whenever she feels like it. I'd logged off - it's the only way to get the User login screen - but somehow she managed to bypass it. I KNOW the only way around it is to reboot the laptop, but she swears up and down she just opened the lid and the account was open.
Multiples users in Windows XP Pro, Is there a way for my account to always log automatically as I restart windows without asking me to choose who is logging in?
View 6 Replies View RelatedI got a problem to enter windows XP SP2 prof., it shows empty desktop at startup and there is no user, no start menu.when i press Ctrl,Alt,Del many time i got the task manger and there is no user in it.please can i do to get back the user. i don't want to reinstall windows
View 6 Replies View RelatedThis one has been hard to research, because all of the search terms are so common and generic. Windows XP desktop user new alternate login temp...Background: The PC in question has Win XP Home SP3. I recently reformatted the hard drive and restored the entire system including all updates, drivers, etc. Each person in my family has a logon. After doing the reinstall of Windows and setting up the user accounts, I logged into each to set up their "My Documents" folder set and restore their files, etc. from backup (on a secondary hdd.) I also restored a few other personalizations like wallpaper and jumped through the "Welcome to Windows XP" hoops. When I was done, all user accounts were established and had been logged into at least once if not more
View 3 Replies View RelatedI have some xp machines on a peer to peer setup. One computer is basically acting as a server. I need to know how to remove all the user names from the login screen. To a crtl alt delete login setup?
View 3 Replies View RelatedI had this set before, but since i messed with something under user logon, I cant get it back anymore.Like how do I set it when I boot up pc, theres the xp logon(with bar going back and forth) then I just want it go straight to screen so I dont have to be clicking my user account. Instead it stays at choose user account.
View 3 Replies View RelatedI recently assigned a new user (the first one) to an XP machine. Previously, as it started up, it prompted with "Administrator" and a password field (which I had left blank), and a message about being able to setup users once I logged in. Now, having assigned a user, all I get is the offering of the new user, and when clicking on that I get prompted for the password. When I type in the password, the desktop is nothing like what it used to look like when I went in through "Administrator" - the desktop image is gone and the shortcuts that were on the desktop are gone. And my drive mappings to my network are gone. How do I get back to the "Administrator" login screen? and/or assign the Administrator desktop to the new user?
View 6 Replies View RelatedDoes anyone know why, when I click a user name, I get an error message "windows can not load users profile settings. But will load default settings because the file is being used by another process"? Was recieving error message about virt mem last week. Couldn't increase paging file (maxed-384mb). But, changed settings to 1000/1000 max/min to stop virt mem message. Now, I'm the only one who can log on without the computer freezing and that's the message I get. I'm the administrator. The default settings are set to my daughters user name. My user name is password protected and my family all use the computer. We only use it for surfing-email and IMing. Don't run many programs. Why is my memory being used up? Ran adaware, SpyBot. Have Spyware Blaster.Mcafee firewall/virus protection. All clean.
View 5 Replies View RelatedI have a HP laptop and W2K pro is installed. When I try to log on to either the admin account or my account, It will freeze right after it starts to load the account. Now for the tricky part If I press ctrl a few times right after I hit enter to accept the password, the account will load. I was wondering if there might be a problem with the MBR, I have tried to fdisk /MBR but fdisk is not a valid cmd.
View 6 Replies View RelatedI currently have XP make me password login when I turn it on, but I'm just wondering, is there a way to have it automatically log me in, then go to the switch user screen? I ask this because it usually takes mine a while to load up to the logon screen, but then I have to go back and login before it works properly, so yeah, I'd just like to get it to log me in, load up, then got to the switch user screen so that I can go watch TV for half an hour, come back, and be ready to go.
View 7 Replies View Related