When I look in the event viewer I can see above error message.Are these drivers not loading due to programs being updated or has something gone wrong with my system? Below is the list of files not loading.I have checked quite a few of these files and they are present in my "System32/Drivers" file.
View 1 RepliesMy old system hasn't been powered on for about a year. Problem was the onboard video failed replaced it with a video card from another system (riva TNT) and bought some memory system wouldn't boot, determined that the memory was bad Now the system booted but win2K wouldn't work. No problem I have XP now. After multiple error during the xp install I finally got through it.only the computer will only boot in safe mode. Initially thought it was a hardare conflict so I booted in safe mode with networking and systematically cleared all the yellow.
View 10 Replies View RelatedPC is left on pretty much all the time. Whenever I have to restart it for whatever reason it restarts normally, loading XP relatively quickly. However, if I have to shut it down for even a few minutes, Windows will typically fail to load most of the time. Usually it will hang on the black screen with the white progress bar, or sometimes on the loading xp screen. At this point it will sometimes start up when I reset it, or it will show the "Windows failed to load normally" screen. If I then start in safemode then restart it usually works, or even if I choose "start windows normally". I'm not sure if this is a driver or hardware/bios issue, I have reformatted once, and restored the OS using my XP disk a couple of times but the problem persists. I keep most of my drivers up to date. Tools like Sandra don't report any major errors (from what I understand anyway). I have just ordered new RAM, as I thought this would sort the issue, but it hasnt. I have to run my memory at 100hz so it will boot without any problems . If I run my processor at 200fsb then the computer doesn't boot and it doesn't start.
View 7 Replies View RelatedStarted having issues last week, very very slow loading XP , then once loaded it would freeze take forever to get going again, opening programs files etc took forever, loaded in safe mode last night backed up as much as i could, at some point the comp. shut up and tried restarting, now windows won't load at all, either in safe mode or normal start up, i know a little bit about comps not enough to know if im completely ed or not, or if there is another way i can at least back up my Hard Disk or reinstall windows on my other Hard Disk and back up the orginally Hard Disk that way.
View 14 Replies View RelatedThanks for oppening the topic but now my problem is not here .l'll re-type the problem .Im running win2k pro and now when i right click on a desktop icon or any other icon i get ":Failed to load resource DLL" with no explanation of what dll is missing or corrupt .Once i press 'OK' the problem goes away and everything seems to run fine other than a few exceptions that im not sure are tied .My friend says he had the same problem and a week after ignoring it his pc crashed and died.
View 14 Replies View RelatedI come across very strange problem. Last week my machine running XP Home was infected by 'Boot.Mebroot' virus which curropted my boot configurations and my machine was getting restarted upon loading windows. I tried all the options but no use. Then I re-install (Upgraded to) XP Professional with complete installation without reformat and updated to latest SP3. It went fine, I ran Symantec and found the bugger and kicked off from my machine. Then I started Windows Live update as I want to bring my PC to latest patches. All the updates got installed without an error (about 58 updates most of them were security update, SP3 and IE8). As soon as I restart my machine it shows the same behaivour. It get restarted. I Repaired my XP professional three time now.
Why I am accusing MS XP Update for all this because Last night everything was running absolutly perfect, I started the update it showed me 58 updates. All update gone successfully. After finishing the the updates I simply restarted my machine and it failed again and restarting again and again. It shows me F8 boot options and I tried all but same. So I repaired this morning again. I tried the 'fixmbr' command in recovery console and it displays the dangerous message that 'This machine boot have some problem' but if you ruin FIXMBR you might loose the partition and stuff so I didn't run it as I have very important data on my disk.
i had this problem before and it somehow magically fixed itself, unfortunately it failed to do the same for me this time. dont really no how to describe it, it "loads" windows xp then diesthe screen works and everything seems to be plugged in correctly is this problem due to lack of memory.
View 5 Replies View RelatedI am getting the following message when trying to clean out the recycle bin Explorer.exe fatal application exit Failed to load application texts immediate exit
The menu bar doesn't work or when you right click with the mouseI'm running xp home with sp2 installed
I have searched the forum and have found all comments posted to be pointin towards repair XP. Though this is an ancient decktop that i have no idea where the XP CD is. All i ran was avast preboot virus scan and this has happened.
View 3 Replies View RelatedI can't get past the box that says"Logon User Interface Dll Msgina.dll failed to load. Contact your system administrator to replace the dll or restore the original dll."
Does any body know how to replace the original dll? I tried to run a system recovery on my laptop but I dont know the keys to use.
He is running xp pro and when we start the computer up this is the message we recieve - User interface failure. The logon user interface dll msgina.dll failed to load. Contact your system administrator to replace the DLL, or restore the original DLL. I found this at Microsoft.com http://support.microsoft.com/kb/836683/ and followed the instructions, but when we go to last known good configuration, we recieve the original message again. I've tried to boot in safe mode, and recieve the same message. I searched the forum and found similar cases, except that he does not have a recovery disc. He doesn't know whether the system restore was enabled.
View 7 Replies View RelatedI've tried almost evrything to get my java to install. I even tried registering the DLL's manually. That way was working find until I tried to register "regsvr32 Msjava.dll" and i just get "Load Library failed "cannot find Msjava.dll module." I've just about given up. If anyone has a clue on how to get this module,
View 1 Replies View RelatedCan't run programs from my cmd.exe or command.comI have to open my Command Prompt throughStart>All Programs>Accessories. When I type cmd or cmd.exe in Run it comes up with an error"cmd is not a valid Win32 application." If i type command into Run I get "C:WINDOWSsystem32command.comC:PROGRA~1SymantecS32EVNT.DLL. An installable Virtual Device Driver failed DLL initialization. Choose 'close' to terminate the application."| close | ignore |After it opens I still can't do much...I type:
notepadand I get an error:'notepad' is not recognized as an internal or external command,operable program or batch file. Same goes for all other .exe and programs that I try to open through cmd.
To start, when I try to play an .avi file, real player and windows media player both encounter a fatal error. Thinking there may have been a windows update I went to update.microsoft.com to get updates. I was able to download all of the updates, but I could not install any of them. I tried to install them via express and custom updates on the website, via automatic updates, and virtually every other method I could think of. After researching the problem I came across similar problems with an array of solutions, including trying in safe mode, running sfc /scannow, uninstalling and reinstalling .net, shutting off and turning back on both automatic updates and cryptographic services, changing .dll files (lccwiz & pidgen), renaming the Software Distribution folder, downloading one update at a time, and other things that I can't even begin to think of at this moment, obviously with no success, as well as running SpyBot, AdAware, and Norton.
View 4 Replies View RelatedI am using Microsoft XP with a dial up connection. I use Earthlink mail and any time I try to access mailbox i get this message. It appears that my driver is corrupted or otherwise unaccessable. I began having this problem after running Obits Advanced System Care. I have restored changes made by the program to no avail. Can someone tell me how to reinstall this ODBC driver or access it. I am able to access my email through web mail.
View 3 Replies View RelatedWhen I want to install certain programs, there is a set of error messages that makes the installation fail.If I push "ignore" then this message appears:
"c:Windowssystem32autoexec.nt. The system file is not suitable for running ms-dos and microsoft windows applications. Choose 'close' to terminate the application." I have a feeling that this is caused by a Norton antivirus program I installed couple years ago that I had a heck of a time removing. Could there be a chance that some parts of the program is still lingering to cause this? I've been having this problem for the longest times and threw away a bunch of software.
I recently just re-installed windows xp on my hp pavilion laptop. When I attempted to install the sound driver off of hp site I receive an error message stating."Driver Installation Failed: Could not find the Media device for this driver."I have a basic understanding of operating systems. If you can please explain in detail. I don't know what other information to list. So if more is necessary I do my best to provide.
View 5 Replies View RelatedMy son went to sign onto his computer and this is the message that came up Windows/system32/command.com C:/program~1/symantec/s32evnt1.dll. An installable Virtual Device Driver failed DLL installation. Choose close to terminate application
View 14 Replies View RelatedI recently re-installed win. xp on the dell insperation 2400. Everything went find except the resoluton wouldn't change from the 480 x ...so I tried to set up my dial up but I needed a higher resolution. I did finally find a way to get that although it was very poor quality and I figured that I'd be able to down load the proper driver once on line, which I did do, although I'm not sure it was the right one, as dell doesn't seem to have anything for that model of pc. Anyway I also downloaded the Microsoft updates to get back to current for the secruity stuff. When that was done it required restart, which I did. When it restarted the monitor remained blank after the win. xp part was done loading. I know its on and that my pc is sitting there running, but I can't see anything. I restarted using F5 and tried; last known good configuration, vga mode, and safe mode. In the 1st 2 no monitor. In safemode the whole screen filled with a dos like line repeated over again to fill the whole screen, then a message came on that said, "stop!!! fatal error and I can't remember what else. Can you help? I guess I should mention that I don't have the right driver disk that came with the pc.
View 14 Replies View RelatedWhen Xp loads I get the following Error: LoadLibrary()Failed What is this and how do I fix it ?
View 1 Replies View RelatedInstall the disc before connecting the ipod anyway i installed the disc and then restarted the pc however when the pc boots up it says something along the lines of.
windows failed to start. This could be caused by hardware or software that has recently been installed.
When trying to upgrade to MSN Messenger 7 from MSN 6 I got this error mesage UNABLE TO LOCATE COMPONANT this application has failed to start CRYPTNET.dll was not found. Reinstalling the application may fix this
View 5 Replies View RelatedI just bought a HP Laptop Computer and it has installed in it, Works for Windows. When I try to run the word processor part it come up with this message:
"The Application Failed to start because LTKRN13N.dll was not found. Re-installing the application may fix the problem."I click [ok] and the window closes. Then another windows opens and says this: Windows cannot access one or more required files. The files may have been renamed, deleated or moved. Try re-installing Works and then starting the program again.
Each time I boot up I get the following error: "Munins32_s.exe failed to start, unable to locate component, - LEARN32.dll not found." Can someone shed some lite on this for me and show me how to correct this please? And does anyone know what this "Munins32_s.exe" file is for?
View 1 Replies View RelatedI am using Windows XP on my laptop and now when I try to boot it gives me a blank screen and says "application failed to start, and then something about the userinit.exe".
View 1 Replies View RelatedSometime last week I started getting an error message at startup that hirp.exe application failed to start because Frnu.dll could not be found.I couldn't find out anything about these two files on the Internet but concerned that I now get this message everyday.Any clues what these files are,if they are harmful or helpful to the computer, and how to keep the error message from coming up?
View 12 Replies View RelatedThis just started tonite. "The application has failed st start because netpwldryv.dll was not found. Reinstall may fix... I don't want to reinstall, lose to much, what else can I do?
View 1 Replies View RelatedTurned on the computer and got an error that said, Failed to start because UMPNPMGR.DLL was not found. Re-installing the application may fix this problem. Two problems � I do not know what that file is, and the computer will not get past the error, so even if I did find the file how would I install it on the computer? My computer knowledge is only average so I am not knowledgeable enough to play with the registry. I tried to boot up in Safe Mode also, however it would not get past the error.
View 2 Replies View RelatedWont open for video and how come tell me you can explain me bout this application has failed to start because msvcp71.dll was not found. re-installing the applacation may fix this problem?
View 1 Replies View RelatedI've got serious problems. I've just started getting the error message...
This application has failed to start because oledlg.dll was not found. Re-installing the application my fix this problem
when I try to load certain programs (ZipGenius, ExplorerXP & GOM player to mention just 3). I re-installed all 3 but I still get the problem. I also get the same error when try to run a lot of my system security/registry fix programs
I started getting an error message "Application has failed to start because Framedyn.dll was not found". I found a place on the internet where I could download DLL files. I downloaded the file and followed there instructions which were. Save file to the directory that is requesting the file. If that doesn't work save it to your system directory C:windowssystem32. I saved it in the system directory wasn't sure exactly which directory was requesting it. Reboot the computer. If the problem still occurs, try the following: Press start then Run, Type CDM and press enter, Type regsvr32 framedyn.dll and press enter. I did this and ow I am getting an error message
View 10 Replies View Related