Install the disc before connecting the ipod anyway i installed the disc and then restarted the pc however when the pc boots up it says something along the lines of.
windows failed to start. This could be caused by hardware or software that has recently been installed.
My old system hasn't been powered on for about a year. Problem was the onboard video failed replaced it with a video card from another system (riva TNT) and bought some memory system wouldn't boot, determined that the memory was bad Now the system booted but win2K wouldn't work. No problem I have XP now. After multiple error during the xp install I finally got through it.only the computer will only boot in safe mode. Initially thought it was a hardare conflict so I booted in safe mode with networking and systematically cleared all the yellow.
View 10 Replies View RelatedWhen I connect my ipod Touch to any of my USB ports the hardware wizard loads telling me it's found new hardware before asking to install the software, when clicking through to allow this to run the wizard it comes up with the error cannot install this hardware. The iPod does not show up on the computer and does not even charge when plugged in to the usb.
View 11 Replies View Relatedbefore I got to the login screen I was redirected to a screen with options such as "Safe Mode" and "Start Windows Normally".
No matter what option I go for, the computer restarts and returns back to that screen - creating a loop.
Before this screen appears I am told that my disk drivers failed or something (sorry but I don't remember the exact words) and I should put my system CD in (I assumed it meant my Windows Setup CD, which I later found out was correct).
When trying to upgrade to MSN Messenger 7 from MSN 6 I got this error mesage UNABLE TO LOCATE COMPONANT this application has failed to start CRYPTNET.dll was not found. Reinstalling the application may fix this
View 5 Replies View RelatedI just bought a HP Laptop Computer and it has installed in it, Works for Windows. When I try to run the word processor part it come up with this message:
"The Application Failed to start because LTKRN13N.dll was not found. Re-installing the application may fix the problem."I click [ok] and the window closes. Then another windows opens and says this: Windows cannot access one or more required files. The files may have been renamed, deleated or moved. Try re-installing Works and then starting the program again.
Each time I boot up I get the following error: "Munins32_s.exe failed to start, unable to locate component, - LEARN32.dll not found." Can someone shed some lite on this for me and show me how to correct this please? And does anyone know what this "Munins32_s.exe" file is for?
View 1 Replies View RelatedI am using Windows XP on my laptop and now when I try to boot it gives me a blank screen and says "application failed to start, and then something about the userinit.exe".
View 1 Replies View RelatedSometime last week I started getting an error message at startup that hirp.exe application failed to start because Frnu.dll could not be found.I couldn't find out anything about these two files on the Internet but concerned that I now get this message everyday.Any clues what these files are,if they are harmful or helpful to the computer, and how to keep the error message from coming up?
View 12 Replies View RelatedThis just started tonite. "The application has failed st start because netpwldryv.dll was not found. Reinstall may fix... I don't want to reinstall, lose to much, what else can I do?
View 1 Replies View RelatedTurned on the computer and got an error that said, Failed to start because UMPNPMGR.DLL was not found. Re-installing the application may fix this problem. Two problems � I do not know what that file is, and the computer will not get past the error, so even if I did find the file how would I install it on the computer? My computer knowledge is only average so I am not knowledgeable enough to play with the registry. I tried to boot up in Safe Mode also, however it would not get past the error.
View 2 Replies View RelatedWhen I look in the event viewer I can see above error message.Are these drivers not loading due to programs being updated or has something gone wrong with my system? Below is the list of files not loading.I have checked quite a few of these files and they are present in my "System32/Drivers" file.
View 1 Replies View RelatedWont open for video and how come tell me you can explain me bout this application has failed to start because msvcp71.dll was not found. re-installing the applacation may fix this problem?
View 1 Replies View RelatedI've got serious problems. I've just started getting the error message...
This application has failed to start because oledlg.dll was not found. Re-installing the application my fix this problem
when I try to load certain programs (ZipGenius, ExplorerXP & GOM player to mention just 3). I re-installed all 3 but I still get the problem. I also get the same error when try to run a lot of my system security/registry fix programs
I started getting an error message "Application has failed to start because Framedyn.dll was not found". I found a place on the internet where I could download DLL files. I downloaded the file and followed there instructions which were. Save file to the directory that is requesting the file. If that doesn't work save it to your system directory C:windowssystem32. I saved it in the system directory wasn't sure exactly which directory was requesting it. Reboot the computer. If the problem still occurs, try the following: Press start then Run, Type CDM and press enter, Type regsvr32 framedyn.dll and press enter. I did this and ow I am getting an error message
View 10 Replies View RelatedI am getting an error message when I first start up my computer. It reads "this application failed to start becasue MSCTF.dll not found" or something like that. also, I recently bought a new wireless printer and when I try to install it, my computer won't allow it---giving some sort of error message that the same MSCTF.dll not found. am i missing some drivers??
View 1 Replies View RelatedI have a problem in my PC that as I switched on its power, a beep sounded three times and then stopped. Monitor LED was blank; no any message appeared at it while monitor LED continuously blinked. I opened the PC cover and found that LEDs at mother board were illuminated. I re-tighten all the plugs, checked the power supply but all is ok.
View 9 Replies View RelatedConstant error message in event viewer, the event id is 7000 and the description is Remote Access Conection Manager failed to start.Please I need immediate assistance to resolve this issue.
View 11 Replies View RelatedI usually don't turn my computer off, but let it hibernate. This never caused problems, but lately, everytime after about a week, Windows became unstable. Part of the text disappears from the screen, like some text from web pages and the text 'start' on the start menu. When I try to start programs, I get various error messages, like 'The application failed to initialize properly (0xc000012d)'. When I close some programs, the system seems to work again for a couple of minutes, but then the problems start again.
(It might also occur when i do not use hibernate, but keep my computer on for a couple of days, but I didnt try this.) It looks like Windows is running out of memory or running out of some other resource? How can i check which resource is exactly running out? Physical memory is 458,224 kB, of which at the time of the problem about 84MB free and 114 MB system cache - not very different from the values during normal use.Kernel memory during time of the problem is total 188 MB - a lot higher than during normal use. However, I don't know what kernel memory is, how to reduce it, and whether it might cause this kind of problems. I am using Windows XP Home SP3. Processor is AMD Sempron 3000+.
I have lost my start menu I also have lost the bottom task bar. In addition the views have all changed on the tool bars. For example, on the internet explorer tool bar, the icons are on top of each other or otherwise unaccessible. Several programs no longer work and I get error messages as follows "The application has failed to start because the application configuration is incorrect..." I hit control-alt-delete, nothing happens.
I went to Housecall and ran a virus scan and nothing showed up. I had previously installed (many months ago) SpyBot S&D. As noted above, this is one of the programs that will not run and I get the error message. I tried to uninstall this program and then reinstall it. After downloading the program, I still got the above error message that the application configuration is incorrect.
I tried to start in safe mode. Although I cannot get to system configuration utility, I was able to get to safe mode by hitting F8 as the computer was starting. I selected safe mode and then selected Windows XP as the operating system. The next screen had the words safe mode in each corner and a Log On window in the middle.
The other day my PC started shutting down and restarting for no apparent reason. I have added no new programs or hardware. Then a couple of hours later it started behaving normally even though I did nothing.Now each time I turn it on, it starts normally except that I get the following message: "CC App.exe -- Unable to locate component This application has failed to start because MAPI32.dll was not found. Re-installing the application may fix this problem." What or where is this component and how do I re-install it?
View 13 Replies View RelatedI recieved the following message after a forced restart after windows updates were installed: "We are sorry for any inconvenience but Windows was unable to start successfully" My options are to start in Safe Mode , Last known config or normal. Safe Mode is the only thing that works. Also System Restore would not work Also System Recovery from Sony Vaio Recovery Wizard would not work
View 8 Replies View RelatedIn a not updated Version of Windows XP you can run (Start-run) "start"command at the Run dialog just typing it, when you update windows andwrite the same "start" into Run dialog Windows shows a error message >Windows cannot find `start`. Make sure you typed the name correctly,and then try again. To search for the file, click the Start button, andthen click Search.If you are in CMD the `start` command works fine but the problem is thein Run dialog windows doesn’t recognize it ?
View 1 Replies View RelatedI have a question regarding my PC and some problems that I have been experiencing, which I think are related to my power supply.
First off, my PC will not recognize my iPod Shuffle. When I first purchased the Shuffle, everything worked fine, however one day when I went to plug it into my USB port, nothing happened and the orange light on the iPod flashed. I tried all the USB ports, including the ones on the back of the machine to no avail. This is not a problem on other people's machines, where XP is able to recognize the external device.
Also, whenever I go to shut down my computer, the light on the front of the tower is on and the fan is running. It is like the computer is not even shut down. I have to manually turn off the power strip everytime I want to shut my computer off. Also, "Stand by" is not an option on the XP menu.
I've been told this is a power supply issue. Anyone have any other ideas?
It never would start windows normal but would in safe mode,so now i did a diskcheck and restarted now it gets hung up on the system32driversagp440.sys...at least thats the last one that pops up before it freezes.
View 4 Replies View RelatedWe are trying to start a laptop but windows is not starting up properly. As the boot begins, it takes you to a screen that says, :"if a previous start up attempt was inturrupted due to a power failure, then choose Start Windows Normally". We follow the directions, takes us the Window XP screen trying to boot it up and then takes us to the Gateway screen and then back to the screen where it asks the same question again.The cycles continues without any other options.
View 6 Replies View RelatedI decided to uninstall COLDFUSION from my system I confirmed yes to all those popups that say "this file is no longer needed want to delete"? during the uninstall process. Turns out I wiped out some important .dlls that windows needs to start up correctly. I am hung up on a DOS screen that reads:
"Windows could not start because the following file is missing or corrupt: windows rootsystem32hal.dll Please re-install a copy of the above file. Where do I find the above dll and if its on the xp CD...where on the XP CD would it be?
I altered the boot up in boot.ini so that I could choose safe mode at start up,When I changed it back a screen came up that I`d never seen before asking
me to choose, WINDOWS or WINDOWS DEFAULT and I cant get rid of it.BY the way I am running XP Pro.
When I turn on comp. get the mssg: Windows couldn't start following file missing <Windows root>/system32/hal.dll Reinstall copy of file Recovery does not work. Tried to boot from a cd (changed BIOS to cd as 1st boot device) with win xp setup boot disk downloaded from MS site. Get same error mssg.
View 6 Replies View RelatedI have a big virus problem. I have basically every type of virus there on my computer. The most recent problem that I have is that I have use safe mode, i can't start windows up normally (windows xp home edition). I get a blue screen saying that windows has been shut down to prevent dammage from happing to your pc.
View 10 Replies View RelatedMy Uncle just got a Dell computer and installed a dsl modem, and after a couple of days the computer was running super slow, and a popup appeared a few minutes after startup with a 60 second timer saying that windows was going to shut down. I thought that it was Spyware/adware so I installed and ran Adaware, and I deleted over 380 infected files, and ran AVG 7 virus scan and detected trojan viruses. I saw that his internet security settings were set at the minimum level and the firewall was disabled, so I enabled the firewall and raised the bars on the security levels, but there's still a major problem.
View 3 Replies View Related