I have a big virus problem. I have basically every type of virus there on my computer. The most recent problem that I have is that I have use safe mode, i can't start windows up normally (windows xp home edition). I get a blue screen saying that windows has been shut down to prevent dammage from happing to your pc.
View 10 Replies
I recieved the following message after a forced restart after windows updates were installed: "We are sorry for any inconvenience but Windows was unable to start successfully" My options are to start in Safe Mode , Last known config or normal. Safe Mode is the only thing that works. Also System Restore would not work Also System Recovery from Sony Vaio Recovery Wizard would not work
View 8 Replies View RelatedIn a not updated Version of Windows XP you can run (Start-run) "start"command at the Run dialog just typing it, when you update windows andwrite the same "start" into Run dialog Windows shows a error message >Windows cannot find `start`. Make sure you typed the name correctly,and then try again. To search for the file, click the Start button, andthen click Search.If you are in CMD the `start` command works fine but the problem is thein Run dialog windows doesn’t recognize it ?
View 1 Replies View RelatedIt never would start windows normal but would in safe mode,so now i did a diskcheck and restarted now it gets hung up on the system32driversagp440.sys...at least thats the last one that pops up before it freezes.
View 4 Replies View RelatedWe are trying to start a laptop but windows is not starting up properly. As the boot begins, it takes you to a screen that says, :"if a previous start up attempt was inturrupted due to a power failure, then choose Start Windows Normally". We follow the directions, takes us the Window XP screen trying to boot it up and then takes us to the Gateway screen and then back to the screen where it asks the same question again.The cycles continues without any other options.
View 6 Replies View RelatedI decided to uninstall COLDFUSION from my system I confirmed yes to all those popups that say "this file is no longer needed want to delete"? during the uninstall process. Turns out I wiped out some important .dlls that windows needs to start up correctly. I am hung up on a DOS screen that reads:
"Windows could not start because the following file is missing or corrupt: windows rootsystem32hal.dll Please re-install a copy of the above file. Where do I find the above dll and if its on the xp CD...where on the XP CD would it be?
I altered the boot up in boot.ini so that I could choose safe mode at start up,When I changed it back a screen came up that I`d never seen before asking
me to choose, WINDOWS or WINDOWS DEFAULT and I cant get rid of it.BY the way I am running XP Pro.
When I turn on comp. get the mssg: Windows couldn't start following file missing <Windows root>/system32/hal.dll Reinstall copy of file Recovery does not work. Tried to boot from a cd (changed BIOS to cd as 1st boot device) with win xp setup boot disk downloaded from MS site. Get same error mssg.
View 6 Replies View RelatedMy Uncle just got a Dell computer and installed a dsl modem, and after a couple of days the computer was running super slow, and a popup appeared a few minutes after startup with a 60 second timer saying that windows was going to shut down. I thought that it was Spyware/adware so I installed and ran Adaware, and I deleted over 380 infected files, and ran AVG 7 virus scan and detected trojan viruses. I saw that his internet security settings were set at the minimum level and the firewall was disabled, so I enabled the firewall and raised the bars on the security levels, but there's still a major problem.
View 3 Replies View RelatedI was working on my computer last night and everything was fine. This morning I turned it on and got a message saying windows couldn't start because the file windowssystem32configsystem was missing or corrupt. The only option that I seem to have is to reformat and reinstall all the software which will wipe out all of my files. It have weeks of work on that computer. I sometimes back up online but it's been a long time since I've done that. Is there someway that I can fix it without a total reinstall?
View 6 Replies View RelatedI have Sony Viao VGN-S460 with windows xp home edition already installed. My computer froze so I restarted my laptop and get this screen: We apologize, windows did not start successfully.
View 9 Replies View RelatedSo my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
Install the disc before connecting the ipod anyway i installed the disc and then restarted the pc however when the pc boots up it says something along the lines of.
windows failed to start. This could be caused by hardware or software that has recently been installed.
Recent hardware or software change might have caused this If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose last known good configuration to revert to the most recent settings that worked. If a previous startup attempt was interrupted due to a power failure or because the power reset button was pressed, or if you arent sure what caused the problem choose start windows normally
View 14 Replies View RelatedMy Dell desktop will not boot up. I had closed the lid thereby putting it on standby when I tried to go back it was in a state of limbo, it wouldnt come on nor shut off. So I pulled the battery to shut it off which I have done before. When I tried to boot up I got a message of. Windows could not start
View 1 Replies View RelatedMy computer is currently running Windows XP Home. When i turn it on i get the error message that reads: Sorry for the inconvenience but windows did't start successfully. It then asks me whether i want to start windows in safe mode, safe mode with networking, safe mode with command prompt, last known good configuration, or start windows normally. If i i choose to use the last known good configuration, windows begins to load but then a blue error screen appears and the computer restarts quickly again to the same screen. If i choose any of the other options the computer restarts and eventually ends up at the windows loaded unsuccessfully screen. I would just use my Windows XP disk to either repair or reinstall windows but i use an external cd drive and it does not appear in the boot sequence.
View 2 Replies View RelatedI have a old pc, after formatting and installing windows on it successfully, only to restart half way and freezes up. someone help me out, about what to do, every help will be highly appreciated. thxsUpdate: Just tried to put winxp disc in and start a reformat but again nothing happens and it just goes back to the same screen mentioned above.
View 1 Replies View Relatedwhy does my taskbar and start menu look like windows 95 instead of XP. it seems to have changed itself overnight?
View 3 Replies View Relatedlenovo pc hdd ok, but os windows hp hang up during start up, what is the possible solution?
View 3 Replies View RelatedI was recently given a compaq sr1330nx desktop computer that didn't work. After putting in a different power supply it started right up. It hadn't been used in over a year and I downloaded the 62 high priority updates needed and installed them. The next morning when I started it up it was very slow and unresponsive. I ran the error check utility and defragmented the hard drive. Still very slow and inconsistent. Then is when I probably screwed up and reset the 2 jumpers on the motherboard and went into the bios and checked "reset configuration". Now all I can get is a line of white bars across the bottom of a black screen and the message "windows could not start because the following file is missing or corrupt: C:windowssystem32configsystem. You can attemt to repair this file by starting windows setup using the original setup cd-rom. select 'r' at the first screen to start repair."
View 5 Replies View RelatedWindows could not start because the following file is missing or corrupt: <Windows root>system 32hal.dll Please re-install a copy of the above file.
View 14 Replies View RelatedI had to reinstall windows after a virus took out all of the essential .dll files and the computer wouldn't start up, I now have a problem with some of my hardware not working. When I go into device manager the following have yellow question marks beside them:
ethernet controller
multimedia audio controller
video controller (VGA compatible).
The computer itself is an XC cube edition (not sure if that's a brand or not). It was supplied for a disabled student if that helps? It runs windows XP service pack 2.
When I turn on my computer, I get the following message:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
When I turn on my computer, I get the following message:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
i turned on computer this morning and got an error message that said "windows.32.configuration is missing" What should i do?, the data on that computer is very important
View 1 Replies View Relatedwindows could not start because the following file is missing or corrupt:
/windows/system32/config/system
you can attempt to repair this file by starting windows setup using the original setup cd rom, select r at the first screen to start repair press 'r'
The problem is that this error already occurred and i cant access my windows at all. I have a mac computer with bootcamp (so it has both a mac and pc harddrives), the pc harddrive being the one that has this problem and that i cant access. Unfortunately, I do not have the original XP CD so that's probably not an option... Is there any way I can fix this problem without the CD, or is it absolutely necessary?
so whenever i hovered overtop of my "all programs" menu, it would open up but now its not. ever since i downloaded tweakxp. i uninstalled i but i still have to click it to open it
View 5 Replies View RelatedWhile formatting my system i am facing a problem. the system is showing the following problem.
Windows could not start because the following file is missing or corrupt:
<windos root>system32dal.dll.Please re install a copy of above file
i tried to reinstall windows Xp and a error came up saying unable to start the partition . then when i press ok on the error it reboots my computer. i cant reinstall my computer
View 3 Replies View RelatedMy computer starts up. It goes to the gateway screen where I have options to press f2 and f10. Then it goes to the screen that I don't know what to call where I have an option to press f11...something I'd like to avoid doing if possible. Then it goes to a new screen saying that windows couldn't start up and gives me 5 options: Safe mode, Safe mode with Networking, Safe mode with Command Prompt, Last known settings that worked, and Start Windows Normally. Last known settings that worked and Start Windows Normally both go to the windows loading screen, which loads for a bit, and then my computer resets. All three Safe Modes start running off system32 directories and stop at system32DrivesagpCPQ.sys before my computer resets.
When I start my pc I get an option to either start Windows XP or to run Windows XP Setup. If I am not quick then it automatically selects Windows XP setup where it goes into the intial setup screens where I need to quit and re-boot the PC. There is nothing wrong with my pc and I have no need to carry out any setup tasks, what I want to do is to get rid of this option.
View 4 Replies View Related
