I an constantly get this message (delays anything opening) whenever I go to open anything (programs, web sites, internet, links, etc.). I need help in simple, user friendly steps.
View 1 RepliesI keep on getting a pop up saying windows installer preparing to install?? i cant get rid of it help please
View 3 Replies View RelatedHave a Dell E510 with Wind XP Home. Well meaning friend tried to speed it up by installing Firefox and deleting Internet Explorer. Managed to also delete WordPad and when I start up - a message box labeled "Windows Installer" appears with the note - "Preparing to Install." Notice goes away and I do whatever I need to do online. However I need to reinstall a printer and am getting the message that the installer is missing. How do I fix that.
View 7 Replies View RelatedWhen I turn my computer on there is a long pause/ delay before windows initiates at start up. It lasts about 1 min until Windows finally boots. Immediately after Windows starts up a window pops up titled: Windows Installer - Preparing to install. This started all of the sudden tonight, not really sure why or what caused it but has anyone ever heard of either of these errors? I have ran an updated version of Adaware6, AVG Anti Virus, Ccleaner, CWShredder, Ewido, RegCleaner, Spware Blaster, Spybot. Also, I have been using Avg Free Editon Virus Scan and Windows Firewall and still managed to get 2 viruses today while they were running. Can you recommend a top of the line virus scan and firewall. I have been told that Pc-Cillin is a good virus scan because it has an integrated virus scan and firewall.
View 9 Replies View RelatedWhenever i try to open anything in my PC, windows installer just launches and comes as "preparing to install". Then it goes of automatcally and the clicked program/folder opens without any further problem.
View 1 Replies View RelatedWhen trying to uninstall NET.Framework, to reinstall it, Windows Installer hangs. Gives message about registration, but no reference on how to do it. Windows installer works to install other updates.
View 14 Replies View RelatedI have a computer running XP Home with no service pack. I removed several viruses from the computer. Sasser.E , W32.Korgo.V, Sw32.spybot.KHC. If i try to add or remove software that uses the windows installer if hangs and will not proceed. I get the message 'Install service not responding'. I tried starting the service manualy but i get the message 'error 1053 The service did not respond to the start or control request in a timely fashion'.I tried installing SP2 but when the computer restarted all i got was a blank desktop. I installed the latest version of Windows Installer and it made no difference
View 1 Replies View Relatedwindows installer keeps asking me to install something I don't want installed!
how do I stop this,and where do I look
I have a windows XP box with SP 3. Once booted into Windows I immediately start getting Windows Installer trying to install something. Clearly there is a failed installation in there that windows installer keeps trying to install but can't. When try to intall something new I get the "This happens with windows in running in safe mode or windows installer is installed incorrectly" message. I tried installing windows installer 3.1, but it tells me it is already installed and quits. I tried installing the Windows Intaller Cleanup program that RProffit linked to, but then I get the windows installer is broken message and it can't install. Seems like I am in for a reformat and reload?
View 6 Replies View RelatedWhen I booted up I got a windows installer screen asking to put in the disc to install paint shop. Since I was on the road and did not have the disc with me and don't use Paint shop I uninstalled it. when I boot I get a screen that just says windows Installer and it is very hard to cancel it
View 5 Replies View Relatedwindows installer not working tried downloading it and reinsalling it but still no joy, can't install any new programs. I have also reinstalled windows xp
View 1 Replies View Relatedi was trying to install an application from its installer. And i accidentally went to "open with" and selected another program, thus the installer package always opens in the other progam and does not run. I was wondering if there is a way to undo this process
View 1 Replies View RelatedI had a virus problem which was solved in security forum. Later a fresh problem started with MS office 2K. When ever I started any office application windows installer window popped up & the application started freezing up.I tried to un-install the Office Suite through Add/Remove programmes but same problem occured.So i tried un-installation by eraser2K programme,which did the un-installation.Now I am unable to re-install Office suite.
View 6 Replies View RelatedI can't install windows installer from the Win update site. I get the Error Code: 0x80070005. I am trying to install 893803 (v2) as selected by win update. It will start installing then quit about 3/4s way through. I also get these messages...KB893 803 v2 Setup Access is denied. And KB893803 v2 setup installation did not complete.I have win xp home sp2. I recently reinstalled the OS and am trying to update it.
View 6 Replies View Relatedi pulled out a program disc halfway through installation, which jammed up windows installer (every time windows was started, a message came up saying to please put in the install disc). I fixed that by finishing the installation (putting the disc back in 4 or 5 months later, we don't get to visit much), but during the time she had the problem,which was right when she got the computer,97 or so Windows Updates downloaded to the computer, but couldn�t install.
These files include everything from the service packs (which are supposed to install by themselves), to critical updates. The computer is very slow at startup, and wants to install the files at shutdown. No error messages, but the files remain there wanting to install.
Right, I've uninstalled Windows Installer and installed the latest version, but it didnt install properly and I have no add/remove programs and cannot install the Windows Installer.
I've tryed reinstalling in safe mode, rebooting about 9 times and I cannot install it
When i install windows,it says windows could not load the installer for disk dr
View 2 Replies View RelatedI have tried to install adobe reader 9 but as i get to the end of the process i get the following message The windows installer could not be accessed.this can occure if you are running windows in safe mode or if windows installer is not correctly installed.
View 1 Replies View RelatedI had noticed that I could copy but not paste. For example, I could right click an icon on the Desktop and copy it, but using Ctrl-V or right-clicking on the Desktop to Paste did not work. In fact, the option is not even highlighted in the shortcut menu. Even to drag and drop an item from one folder to another is not possible. However, I can copy and paste text, like copying and pasting a sentence is MS Word. I also found out that I cannot install any programs on this same computer. This is the exact error message I get when trying to install Ad-Aware:
"The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance. "
I use earthlink DSL and the offered a clean up system for free (PC finetune) so I tried it because my computer was a little slow. Well, after installing and rebooting up dates came up. I let in automatically install updates. I know 'stupid'. I now have it set to notify me before installing. Anyway, one of the updates was some version on windows explorer. It is always attempting to Install. It doesn't say what what it is installing. I look on the internet and one told me how to find out what it is attempting to install. It came back as "3.1.400.5512" I'm think that is internet explorer 3.1 not sure. It slows my computer, won't let me go online because it interfers with the sign on window pop up.
View 10 Replies View RelatedThis is an odd problem that just won't go away, I have a friends computer who has win XP sp-2 they had Norton 2005 on it and uninstalled it cause it is just junk anyway. But the problem is that any program that needs to be installed or updated now gives the message that you need to install the norton disk in CD drive for unknownname install.In event viewer is says "Source: MsiInstaller, Type: Warning, Category: none, Event ID: 1001, Description: Detection of product '{C6F5B6CF-609C-428E-CA83176C021B}', feature 'Complete' failed during request for component'{A07EA0AF-E117-4A34-8D54-5D826F12988C}' for more help & support" blah, blah no help at web link.Also I cannot get windows update site to even load with anything in it all no message just blank, other websites seem fine.
View 7 Replies View Relatedcan I stop xp from trying to install an old programme? which doesn't work and I can't delete? I have a copy of roxio media creator which doesn't work since I reset windows to an earlier point, the prog can't find a certificate and questions the system date so won't install. it won't delete either for the same reasons and every time I try to copy files it tries to install the damn thing, unsuccessfully
View 1 Replies View RelatedEvery time I boot up I get the following error: Found new hardware wizard Cannot install this hardware There was a problem installing this hardware Logical disk manager An error occurred during the installation of the device The class installer has denied the request to install or upgrade this device
View 9 Replies View RelatedI installed Windows Vista 64 at one point, but my wireless usb adapter didn't have any drivers for windows vista 64 so I reformatted my entire hd and reinstalled win xp home. anyway, the problem is I cannot install the new version of iTunes,openoffice, and Steam. There's probably more programs out there that I cannot install, so I really want to resolve this issue as it is very annoying. everytime I try to install any of these programs i get this message. "The installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package."
View 11 Replies View RelatedThis makes about the 6th time I have done the install. When it boots, it hangs for between 10 and 30 minutes at the XP splash screen. The blue bar just goes back and forth but nothing happens like forever. I had tried to replace my HDD as well with an WD SATA 320G HDD, but the bios won't detect it. I tried installing a 40G HDD that had 27G of free space on it. I had been using it as a secondary until my primary went TU last week. I kept running into the problem of it hanging on installation. It would get to the point where it was installing drivers and just stop.
Due to problems that I have been having I went out and bought a new motherboard. I am now running a 1.8G Pentium 4 on an Asis 848P motherboard with 512M DDR Ram. I removed both the 40G HDD and the SATA drive from the system. They are no longer attached. I took a 13G HDD that I had removed to put in a bigger HDD and decided to use it.I did a clean install on the 13G HDD. I formatted it during the installation. Because of the other problems, the only devices that I have connected is the video card, an ATI Raedon 7500, the HDD, keyboard and mouse.The blasted thing still hangs on booting! Because I wanted to know if it happened I activated boot logging and this is what I got.
Late lastnight I was attacked by a nasty virus that wouldn't give control of my computer back, every attempt at a "System Restore" was met by the virus blocking my attempt. I was able to do a "System Restore" via "Safe Mode" but strange things began to happen even after the restore point, so I saved as many family pictures as possible. Bottomline, is there a safe way to scan my thumb drive for virus so that I can add my family pictures to my new fresh install?
View 49 Replies View RelatedMy C: drive crashed and I used that excuse to buy a WD3200 320G SATA drive. My old MB wouldn't support the SATA so I bought a ECS 848P-A and a 512M DDR memory.I tried a new install of XP (Home) onto a 40G drive as primary which had 27G free space. It would only install to the point where the screen was saying installing devices and there was 33 min left on the install. At that point it would stop. The little bar on the lower right would freeze. I left it like this for over 30 min to see if it would clear, it never did. I figured that there might be a problem with stuff on the drive so I removed it and installed a 13G that I had laying around. I formatted it during the install so it should have been clean. It would install and ran until I installed the motherboard and video card drivers. When it went to reboot it would quit. It would go to the XP splash screen and stop. The blue bar would keep cycling but it would never proceed.
View 6 Replies View RelatedI decided to do a clean install of XP with SP2 included on the same disc. I had done this before but sometime ago. The Install appears to run fine but after all the files are copied to the hard drive and then the system reboots it hangs displaying the XP logo with the blue activity bars going from left to right. I've removed all boards and even bought a new copy as there is a small scratch on it. I get the same result with the new disc. I borrowed a copy of XP with SP1 and it installs fine. I assume this proves the hardware is all ok.
View 3 Replies View RelatedI am trying to install XP Pro on a machine with an AMD K6 clocked at 266mhz and 160mb of RAM. This is a laptop currently running Windows 98 SE. 98 works fine for me but I hate installing drivers. The laptop is an Compaq Presario 1235. I just want the laptop running XP, it doesn't have to be lightning fast. In setup, it hangs at Setup is Starting Windows. It does the same when installing Win2k.
View 4 Replies View RelatedI'm starting to get the message 'Preparing to Hibernate' and then the computer shuts down. Using Windows XP on a Compaq Presario with 896 Ram.
View 3 Replies View RelatedI am reinstalling my Windows 2000. It worked okay before but I started having some trouble with some of the DLLs, so I thought a fresh install might fix the bad DLLS. It goes through the whole install process, but hangs up at the upgrading IIS section every time. Anyone have any ideas what could be causing this? I haven't changed any of the hardware since I installed 2000 last time.
View 2 Replies View Related