Installation Failure Due To Missing File - Autoexec.nt?
Jul 9, 2005
I have recently tried to reinstall some oldish games (rainbow 6, Total Annhilation) and when you select install, an error pops up:
16 bit windows subsystem
C:WINDOWSSYSTEM32AUTOEXEC.NT. The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application. Examination of that folder shows that I do not have a file called Autoexec.nt at all, is this correct? These games have run on this PC before and the error applies to multiple games suggesting a system problem. Is there a way of repairing or checking windows to replace this file. I did get a virus recently however Norton said it quarantined it - this might have
affected windows though prior to this I had noticed no differeance.
View 2 Replies
ADVERTISEMENT
Dec 13, 2004
I'm getting a message: autoexec.nt the system file is not suitable for running ms-dos and microsoft windows applications.choose close to terminate the application. seems I'm missing these files:
config.nt
autoexec.nt
command.com
I tried to recovery them off the recovery disk but they are not there either. is there someplace I can get these files? I went to microsoft.comsupport and tried to put them in through notepad like they said and it did'nt work, must be doing something wrong.
View 1 Replies
View Related
May 24, 2005
trying to run regedit from run. a black dos screen pops up and a message comes up that says "autoexec.nt missing" when i ran it again the black screen came up, went away and then nothing happened. i'm using xp
View 3 Replies
View Related
Dec 22, 2004
i have windows xp. when i put in certain games, and encyclopedia cds, i get a window that pops up and says: c:WINDOWSSYSTEM32AUTOEXEC.NT. the system file is not suitable for running ms-dos and microsoft windows applications. i have tried everything to get my stuff to work. a guy told me to go to the properties of the game, and set it to run compatability for 98, so i did. but it didnt work. i really need help fixing this, so i can get my encyclopedia working.
View 10 Replies
View Related
Jul 6, 2007
after installing acrobat on my machine, I realised that my FILE print port for postscript printing had been deleted. Need help to reinstall the print port.
View 3 Replies
View Related
Sep 18, 2009
i am finding a missing file named ks.sys.i have been trying to install audio devices for my computer and it will not allow me to install them because i'm missing files. at first i was missing ksuser.dll file but i was able to download that and install it, and now its asking for the ky.sys file.
View 4 Replies
View Related
Sep 28, 2010
I purchased the Dell Inspiron 1525 laptop about 2 years ago. It shipped with Vista at the time, but I installed XP on the partition Vista was installed on and have been using it happily ever since. There is a common problem as it turns out, after having read through other forums, that used to exist with Dell laptops, including mine and that is that they would come shipped with the Mediadirect button. When pressed, it supposedly boots the laptop to another partition, which would start up a multimedia software that can playback CDs, DVDs and/or other media files on the accessible storage. The critical and serious issue is that once this button is pressed and you try to turn on the laptop normally again (boot into Windows), it would not boot up, producing the Invalid partition table error at boot-up, suggesting that the former process messes up the boot record somehow.
The same thing happened to me before. A quick suggested fix was to press the button again. While it didn't solve the issue, it at least booted in the right partition, but complained about an ntfs sys file not being there. I solved this myself by repairing the existing Win XP Pro SP3 installation via an XP SP2 CD, which reverted back SP3 to SP2 without much hassle, surprisingly, and Windows booted up normally. I just had to manually update the system to SP3 again using Windows update and that was all. Other software like IE and WMP were also reverted, but reinstalled to the latest version manually.
View 1 Replies
View Related
Aug 30, 2009
1.laptop is hp 2590US running X Phome
2. physically hooked up KDS flatscreen to 15 pin connector
3. Device manager recognizes 3 monitors i.e. default, flat screen and plug and play
4. FYI device manager shows display adapter Radeon 1GP 345M
5. Went to display settings established 1 and 2 monitor & extended desk top
6. Advance+monitor depending on selection 1 or 2 monitor displays either default and flat screen or default and plug and play.
Initially 4 weeks ago when I started this process I did get a brief display on flat screen which leads me to believe something I am not doing. Something else I found strange and may be as it should be whether 1 or 2 is highlighted and identity is pressed only the large 1 is displayed. I have tried fn then f4 at hp's advice as well as fn then f5 which is the actual function key on this unit.
View 2 Replies
View Related
Mar 30, 2010
I tried to load windows xp in my pc but during installation (of course many times i tried to install) blue screen saying your computer is having problem like that. I checked the memory with diagnostic tool it said no error and also motherboard no error setupdd.sys at one time and another time stop: 0x000008e blue screen errors came during setup end Moreover i pressed skip for some files beining with letter w during setup in dos mode, but successfully installed. will it give any error after installation finishes?
View 7 Replies
View Related
Sep 10, 2006
I tried with Partition Magic 8.0. It rebooted, and when the script would usually kick in, an error was displayed instead: xmnt2002 program not found - skipping AUTOCHECK and then it would boot. That frustrated me. I tried again, this time unhiding the partitions using grub before booting. Still, same error. So, partition magic was not going to work. Next I decided to try to go to the Linux installation directly, and use the YaST utility to resize my windows partition. I tried, but that failed as well. YaST gave me the "Failed to resize partition. The Installer will now exit" error each time I tried that. So, the Linux-rout failed as well.
By now I was quite frustrated. I decided to re-install Windows from the disks I had been provided, deleting the windows partition using the installation menu and re-installing it on a smaller portion of the unallocated space. Windows was installed using the same amount of space as the first installation -- It did not allow me to resize it's disk usage like I had planned. So, I lost all the software, but no matter, I reinstalled it all in a few hours, then attempted to resize my partition again...............
View 2 Replies
View Related
May 20, 2008
XP Pro Service pack 2. Version 2002. Have not been able to update for over a year. Continually says updates are ready to install (little yellow shield with exclamation point on bottom right toolbar). It goes through the install process then finally pulls up a screen saying:
Installation Failure
Error Code: 0x80242006 then says: Try to install the update again, or request help from one of the following resources. I've opened up a support request but none of their suggestions were working (install 1 at the time, etc). I went out of town, returned and they'd closed the request.
View 2 Replies
View Related
Apr 6, 2006
I get the error message "Installation failure. Error code 0x643" when trying to install updates for the Malware removal tool. I have automatic updates on my computer also Windows genuine advantage validation.
View 5 Replies
View Related
Aug 31, 2006
I just completed a reformat/reinstall on a Dell Dimension 4700 running an OEM version of Windows XP Home Multimedia Edition. I had a few driver issues, but I got them all resolved but one, and that is the Multimedia Audio Controller, which is listed under "other devices" in the Device Manager. When I run the wizard, it says it can't find the driver. I located the device by running msinfo32, and I went to the Dell site and located the driver I need (I think) which is R89530.exe.
I downloaded the driver and it only downloads about 1 Mb of a 7 Mb file. I double clicked to run it anyway, and after going through the standard process of creating a folder for it, this message popped up: "This self-extracting zip file is part of a multidisk zip file. Please insert the last disk of the set." Then when I cancel out of the download, it gives me the message, "An error occurred while unzipping. One or more files were not successfully unzipped. The error code is 190."
I have downloaded the file from Dell USA, Dell Canada, and Dell Europe, as well as from an ftp site I found on Google, which is a list of Dell compatible drivers, and the same thing happens with each download. Have you ever seen this before, and if so, do you know of any solution? I currently have no sound, except for the pathetic little beep the system occasionally makes -- nothing at all out of the speakers.
View 2 Replies
View Related
Oct 4, 2005
when i try to update and download Office XP Service Pack 3, a screen pops up saying that the feature i wana use is on the Microsoft Office Standard CD rom...but i don't have the CD, the Office was preinstalled...now i can't finish the update because it will abort after there's no correct CD rom in the drive.
View 2 Replies
View Related
Sep 29, 2007
Decided to update my XP installation with the XP2 upgrade. Everything was sailing smoothly until the upgrade halted with an "Access Denied" message. Luckily it deinstalled and reloaded the original XP1 installation successfully - I don't see any problems! If I look at the current setupapi.log, I see several pages of #E197 errors towards the end of the update (the description says, "Writing "C:WINDOWSINF etwzc.inf" to "C:WINDOWSINF" is not an approved method of installing INF files. Use a 'CopyINF' entry instead". Then I see the following:
#-007 Deleting registry key HKCR.AudioCD
#E033 Error 5: Access is denied.
#E065 Parsing DelReg section [Product.Del.Reg] in "c:windowssoftwaredistributiondownload16b2c96a0c41f4dfdb4d3cc228a4f819 updateupdate.inf" failed. Error 5: Access is denied...............
View 7 Replies
View Related
May 29, 2006
I'm in the process of repair/recovery of my machine (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). I'm following exactly the instructions in:
http://attachments.techguy.org/attac...chmentid=62075, but a problem has developed. The "software" file (which is the file that the original blue screen error message says is "corrupt, absent or not writable") will not copy to the new tmp directory to create the backup. My understanding from the article is that this backup file (software.bak) will later be used to restore correct settings for various software applications. Since I can't copy it, it appears that I am screwed,
View 1 Replies
View Related
Apr 23, 2005
I am running Windows XP Professional and it came up with that message Disk Boot Failure: INSERT SYSTEM DISK AND PRESS ENTER when i turned on the computer. In my bios it is set up to CD is first boot and HDD is second I dont have a floppy drive and only 1 hardrive...I do not have the original windows xp pro installation cd, but I do have a full unused version of windows xp home edition installation cd and I put that in and booted off of that it started loading up like its supposed to then I got to the screen that said to start installing windows xp press enter so i did that then it went to the agreement thing and said press f8 to aggree to these terms i did that and it braught up a new screen saying
View 11 Replies
View Related
May 12, 2007
I tried to reinstall win xp but it is barfing at my modem / router driver. It complains that the driver isn't certified by Microsoft, and crashes. I've tried rebooting and removing/reinserting the disc but the installation continues from the point it left off and crashes at the driver again.
View 2 Replies
View Related
Sep 2, 2005
I have a Dell 2350 Pentium4 1.8 gig Running WinXP Servicepack 1. When trying to install service pack2 thru automatic updates, the installation seems to be going fine. Then, while copying new files to the computer (after backing up and setting a restore point) I get a message that says "Generic host proces for Win32 Services encountered a problem and needs to close". The file copying continues in the backround. The standard message asks if I want to send the error to Microsoft. I send it and the file copying continues. After five more minutes copying files an error message pops up:"Access is denied". The system requires a click on "OK" and the old system is restored. I have tried to install several times with the same results.
View 5 Replies
View Related
Dec 21, 2005
All my processes are set to manual or automatic
I have all previous updates.
I have scanned for viruses and spyware with 2 scanners for each.
When trying to install SP2, it gets exactly halfway then it says access denied.
View 7 Replies
View Related
May 3, 2005
a friend asked me to install a new hard drive for him because his crashed. So i purchased a new hard drive (maxtor 60 gb) set out to partition and format the drive, using a win 98 boot disk. I partitoned the drive ( for large volume drive.) Formatted the drive ( format c: /s ) to include system files.and proceeded with Os install Windows 2000. Everything went as smooth as silk... the when install finished, I was prompted to remove the disk from cd rom and complete installation with the onscreen prompt. I removed disk, clicked finish and the computer rebooted upon loading, when it went to start windows it said DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I put the Win 2K disc back in and hit enter. It started windows perfectly no errors at all... then I took disk out re-started ( to check system stability) and back to the same error message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I of course freaked out, I feel like an idiot cause I cant get this thing to work right. tried reformatting without the sytem files, re-partioning tried win 98, winXP, nothing same stuff! So I talked to a pal got a hard drive wipe program off the net "killdisk", wiped the drive and tried to reinstall Win 2K, same problem.
View 8 Replies
View Related
Dec 2, 2004
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
View 4 Replies
View Related
Sep 6, 2010
i see this message comes on my screen that there is a boot failure and that two files are missing.i must then insert system disk and press enter,then the system goes through setup,after finishing this process it takes a good time for windows to get going.but my problem is when i closed windows and restart my computer iam getting the same message that i must insert system disk and press enter,can you say what is happening. i am using windows xp professional service pack 2
View 1 Replies
View Related
Feb 4, 2005
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
View 6 Replies
View Related
Sep 18, 2006
I have started getting a BSD stating that I have a registery file failure c0000218 error. Cannot load the hive system root system32 config software.
View 2 Replies
View Related
Mar 5, 2007
STOP: C0000218 {Registry File Failure} The registry cannot load the hive (file):System RootSystem32ConfigSECURITY or its log or alternate. It is corrupt, absent, or not writable I got this on a screen last night.
View 3 Replies
View Related
Apr 16, 2005
i got on it, and it started loading the splash screen with windows xp on but then this blue screen error came on.
below is the error message.
stop: c0000218 {Registry FILE FAILURE}
The registry cannot load the hive (file):
SYSTEMROOTSYSTEM32CONFIGSOFTWARE
or its log or alternative.
it is corrupt, absent, or not writable.
View 14 Replies
View Related
Oct 3, 2007
I am using XP home and when I start my laptop the following message came up: STOP: c0000218 {Registry File Failure} The registry cannot load the hive (file): SystemRootSystem32ConfigSOFTWARE or its log or alternate. It is corrupt, absent, or not writable.
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.
I followed the link from other threads to the microsoft site explaining repairing the registry using the installation disk. I got the computer from my brother in law and do not know where the installation disks are. Also it was factory installed and the microsoft instructions say they do not work with OEM software. Is there a way to fix this without the disk? If I find the disk Dell supplied will it work since it it was not a XP install disk?
View 12 Replies
View Related
Aug 20, 2009
I have a dell dimension E310 with windows xp, and everytime I start my computer I get a blue screen, that says "c0000218 {Registry File Failure}The registry cannot load the hive (file):System Root System32Confg SAM or its log or alternate.It is corrupt, absent, or not writable" then "beginning dump of physical memory: physical memory dump complete." My warranty expired so dell won't help me unless I want to pay $50 for a phone call, and I was wondering if there is any way to fix my computer without losing everthing that was on it.
View 7 Replies
View Related
Mar 4, 2006
I did not add any new memory to my systeme. however, I did remove my current memory to access the inside of my laptop. The fan wire had come loose so I reconnected. I fixed that problem only to find out the problem with the registry. I have chose the load last known configuration that worked correctly but it still gives me the little blue pop up screen with the error, then the restart.
I tried to use my windows xp os disk to try and repair it but it wont read the disc before the blue screen comes back up. I'm thinking of buying a Laptop To IDE Hard Drive Adapter. So, I could at least format my hard drive. I'm not sure if this would be a good idea. I went to the microsoft webpage that deals with this issue but I can not seem to find one to fix my problem.
View 3 Replies
View Related
Aug 3, 2010
When I turn on my computer running windows XP, I recieve the following message: STOP: c0000218 {Registry File Failure The registry cannot load the hive (file): SystemRootSystem32ConfigSOFTWARE or its log or alternate. It is corrupt, absent, or not writable. how to get it normal and my data too?
View 12 Replies
View Related
