Home Stuck When Repairing
Jan 19, 2006
i have a dell dimension 2400 - running XP Home, which was infected with numerous viruses and spyware - these were cleared - though due to its very nature a number of os files were removed/deleted. I then decided to run a repair of windows XP home to reinstall these files. However, on numerous attempts, the repair gets through to the Preperation Phase ok, and then gets stuck at the "installing Windows" phase, with 33 minutes to go - with the "installing Devices" box at around 80% bar completed.Has anyone any ideas what to do and fix this - apart from a clean install of course!
View 1 Replies
ADVERTISEMENT
Aug 19, 2009
I was trying to repair my desktop Windows XP Home installation.I have the original restore cds, but did not want to do a clean sweep, so I got hold of an XP Home cd, did all the repairing and copying of files, entered the key on the COA attached to my desktop, and all the process was fine. At the end, it asked me to activate the copy of windows, which I accepted because my key on the COA is all "clean". However, the process does not go anywhere, it only takes me to the desktop, which is blank and has nothing, not even the taskbar visible. The computer freezes.I have repaired other desktops and laptops I have at home before, and the process worked no problem, so I don't know what i did wrong this time.
Before I did the repairing on this desktop, I had disabled my ethernet adapter because I was connecting to the internet via wireless. So I'm thinking the problem is that the wireless card drivers got deleted, and the system cannot enable the ethernet adapter to connect to the internet to activate windows. First question is: Is this the case? Please help.I am not sure if the XP cd I got is an OEM version, or full retail. Second question: Could this be the problem? Finally, I was thinking of connecting an older hard disk that has a working copy of windows on it to my desktop (instead of the one I "repaired"), boot from it, and then activate the ethernet adapter, so I can then plug the original hard disk and hope the activation process to work.
View 9 Replies
View Related
Apr 29, 2007
I'm trying to run the xp disc to repair some reg, file assoc files. Does anyone know a step by step on how to preform this?
View 2 Replies
View Related
Nov 26, 2004
Last week, my home page was hijacked by spyware (I think), it was actually 2 pages in length, the bottom of first page was a note "Removal instructions". I have windows XP SP2.I was able to go into the registry, with the help of another forum, and delete the offending file. Now my home page is white with my general icons, (I used to have the pretty beach picture of windows XP). I can't seem to restore the picture.I have also discovered the same file in "my computer" in system 32. When I press delete the icon disappears for about 3 seconds and then returns. The files name is "Twain Tech" and in system 32 as "Twunk 16" and "Twunk 32"
View 14 Replies
View Related
Jan 15, 2007
My wife bought me an Acer pc pentium 4 etc etc running Win xp home.I am trying to repair this O/S but in real terms I would like to use XP pro 2nd ed. again! When I got the machine it had Windows pre installed and now I have a few probs I really would like to either repair the O/S thats here or better still Format and install XP Pro ! Other alternative is to put XP pro on another drive ....The system came with 80gb split into two and I have also an exterior H/D which is 250gb could I do this/
View 2 Replies
View Related
Oct 12, 2007
I have just started to have problems with my Acer T120E Aspire. When the pc is switched on it boots up as normal, showing the Windows XP home edition splash screen and goes to user accounts. When one is selected, it does'nt matter which one, it goes through the logging in procedure, showing the 'loading your personal settings' screen. However, after about ten seconds it goes blank the cpu fan cuts in and the computer restarts again.I decided to repair XP as I could'nt even log in under safe mode. I borrowed a disc as I have misplaced the original disc that was supplied.
View 5 Replies
View Related
Dec 31, 2005
I read somewhere in this forum that if you had a CD Key stuck on your computer you could install the Windows XP CD of your choice.What I mean to say is this: I have an HP Compaq computer that came with the Windows XP OEM bundled version and its own product Key stuck to the computer. So after the 90 day support with HP, I got rid of all the crapola that comes with their bundle, (AOL, Disney Channel, Silly things, etc.) and reformatted with a copy of Windows XP OEM, using the Product Key on the computer. NO Problem. I have done this several times before and only had one problem, which was resolved through phoning Microsoft Activation Center.
View 5 Replies
View Related
Sep 15, 2007
I don't really know where i should start so.well earlier today i installed a second hd in my computer to pull so files off of it for my sister and my mom, but when i got it working it said accsess was denied to there stuff i went on my moms computer to check if i hade already backed up there stuff of the old comp, so i go into her document to see if i could find the old documents and when i start scrolling through them the window freezes...so i leave it for a minute and while i'm waiting i close some other programs one of which was mozilla which was also frozen.I go back to the my document window and its still frozen.
I try to close it and of course its not responding so i click end now and it made the every thing disappear like the task bar and all the icons on the desktop are missing...so i wait and see if any thing will reappear and nothing does so i restart it and it starts booting up..the windows logo comes up and the little bars only gets half way across then it restarts and brings me to that menu where you can choose save mode or start normally and all that and no matter what i pick the comp just restarts and bring me back to the menu.
View 1 Replies
View Related
Jan 6, 2005
Windows xp will not boot to the safe mode or normal mode or the the last known good configuration, just goes in a loop and right back to the menu page
View 9 Replies
View Related
Nov 23, 2007
i have looked up fixes for this, and they say try a repair with your Windows XP disk, however, ive torn apart my house and can't find it. I really cant and dont want to reformat, one because i have a lot of files on my computer and 2, if i reformat, i would have to reinstall my modem,router,and ethernet, which i dont have disks for any of them (tore up my house again). As you can see, im not the most organized guy, and dont have any of the discs
View 3 Replies
View Related
Dec 12, 2007
My friend has a laptop that was starting to fall apart on him. When it boots it will only go into safe mode. When you try to put in his password that he has had for a long time, it doesnt work. My question is this, can I repair XP pro with a xp home disc?? Or does anyone have any ideas as to get in to XP pro?
View 14 Replies
View Related
Aug 16, 2005
I have a Toshiba tablet PC XP2;It boots up very slowly and I have narrowed down issue to two services which
when enabled cause the problem.Workstation and Network Location awareness services.When disabled, the machine boots fine. But is useless unless the services are started manually.
View 3 Replies
View Related
Sep 13, 2008
I'm dual-booting Vista (Vista came pre-installed) and XP, but in order to finalize it I need to get back into XP, booting off the CD. Can't do that anymore. I get a "mountmgr.sys is corrupted" "Setup Failed" error and the computer restarts. It didn't always do this, I've used it 5 times before.I paid $90 for this CD, and unfortunately I don't hvae access to another Installation CD right now.
View 1 Replies
View Related
Dec 10, 2008
i am living in costa rica and just recently purchased what i believe to be a refurbished hp nc6000. in downloading some items from microsoft, i confirmed that i have authentic xp professional installed. however, the previous owner could not provide me with the original cd, hense my dilema. in deleting some previously loaded software, i believe i inadvertantly deleted some shared files for other programs. is there anyway without the original disk to repair the installation or operating system. i have read about hidden partitions and the like, but am not confident enough to try this. i have the serial numbers and whatnot for my xp professional software, so i am not sure if having that info allows me to do anything without the actual cd. one of the problems is i have downloaded internet explorer 7 but it fails to completely install. i have gotten the most recent service packs and updates from microsoft but still no progress. i would go out to the local best buy and get the appropriate software new if i wasnt living in the middle of a third world country. there are computer repair shops close to me, but everyone has spanish operating systems and mine is xp in english and i cant afford to chance losing it. is there any way to recreate the software or operating system back to its original format with all original folders and files intact?
View 1 Replies
View Related
Apr 15, 2010
I am trying to repair my old xp which has bluescreen.I am lucky enough to have my windows xp installation disk. Problem is i cant get the computer to want to boot from the cd drive. I have 3 options: 1st floppy disk, sm-hewlett-pack and pm-samsung sv04
View 14 Replies
View Related
Sep 8, 2005
Just installed XP Pro last week no problems . Last night, my computer will not work.I try to Repair from the CD, but the I get the same error over and over.I get the same error even if I try to run set from scratch.
View 7 Replies
View Related
Jan 12, 2009
I have been trying to create an XP Disk. After following 8 pages of instructions, I was finished. Everything seems to work, but when I boot the disk (I put it first in the boot sequence) here are my actions, and the results, A blue screen comes up stating that it is loading a whole bunch of files e.g. kernerl debugger dll, USB hubs, drivers and so on and 'Windows Setup' at the top A block of writing comes up:"Welcome to Setup. This portion of the setup program prepares Microsoft (r) Windows XP to run on your computer To set up Windows XP now, press ENTER. this is the one I choose i press ENTER a message comes up that says:
"Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running manufacturer supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3." and thats the problem.
View 12 Replies
View Related
Sep 30, 2006
I attempted to repair windows (XP Pro SP2) using the windows cd. Due to some bad memory the repair did not work. I got multiple unable to copy *.dll files notices. I've corrected the memory problem.Now when I go to repair Windows using the CD the previous installation is not recognized. I don't get the "Setup found an existing windows installation, would you like to repair it" (paraphrasing, don't remember exact wording).
View 6 Replies
View Related
May 18, 2007
I am having trouble repairing windows it never finished the initial repair, it got to 9 minutes left and hung - and when I tried to restart another repair, the bootable xp disk never gave the option to repair again. The computer has XP sp1 on it and I have tried a SP1 XP and SP2 XP disks on it.
View 9 Replies
View Related
Oct 12, 2005
I run a small buisness repairing computers. When i get a computer with XP installed and the customer does not have their cd's i can't put XP back on it. Why can't i use my XP cd and their product key number. I tried this and it still won't work. Does any one know a work around. I am not trying to do anything illegal. The computer came with XP and was paid for/registered already. I just want to reformat it and get it up and running.
View 14 Replies
View Related
Feb 25, 2008
I am a beginner. My windows just recently crashed, and I had to repair it. During this process, I was asked for the administrator password. However, I have never set any password for my computer. What should I do now?
View 9 Replies
View Related
Jun 30, 2005
Whenever I boot up my computer it displays the following message: Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM..Now I went to the recovery console and I just don't remeber how to repair the file.
View 14 Replies
View Related
Aug 7, 2003
I attached my xp drive as a slave to my 2000 pro drive and booted. It checked my xp drive and then started to truncate everything. I now cannot reboot my xp drive. I tried using xp cd to repair but it says I can't due to error on partition, drive full etc. I have tried my friends partition software but it finds no errors. When I use his xp drive to see my xp drive, it says it is unreadable. Is there something out there to repair my truncated files? Is this fixable or is formating my only option. I am desperate to retain my xp drive data. Using parition magic 8, it shows my xp drive as a type 07 and my 2000 as a FAT drive.
View 1 Replies
View Related
Jul 31, 2007
About a week ago, I performed a fresh reinstallation of Windows XP Home (I posted here about it) in order to allow it to work with my new motherboard. Since then, everything had been working fine until I experienced a sudden Blue Screen of Death, yesterday, while playing the game 'The Chronicles of Riddick: Escape From Butcher Bay'. I rebooted and attempted to play the game again, but experienced another almost identical Blue Screen at a different point in the game.
View 14 Replies
View Related
Aug 13, 2005
I need to do an XP repair install on my Dell Dimension 8400 to fix several programs that no longer work (Update being the biggest problem). I had used this Forum a couple of months ago and doing the repair install was the recommended solution. I have a copy of the michaelstevenstech.com directions so I know what to do. Unfortunately, when I try to launch the "to setup Windows XP, press enter" step, the program comes back with an error message saying the hard drive is not found.
View 14 Replies
View Related
Feb 28, 2005
Ok, I finally decided I need to fdisk, format and reinstall windows xp. Repairing and re-installing are not options. Too many errors result.Here's the problem. I have several startup disks... from 95 through xp (which is actually ME in isquise). NONE of the fdisk commands seem to work. XP is so screwed up, I'm lucky to get back here, let alone find my original post. All I want to do is fdisk my C drive. My D drive is 120gig, and formatted just fine. I don't want to use it as my master though. I just want to put all my other stuff on it.
View 14 Replies
View Related
Aug 2, 2005
I have a hardrive( Maxtor 6Y200P0) wich have got corrupted and bad segments. (this seme to be a common problem with Maxtor drives) Im almmost sure this drive have psychical damaged clusters, cause i have tested alot & alots of tools that should fix this has failing in repairing this damaged clusters and segments. this includes Maxtor official PoweMax v 1.21, wich fails to complete the surface test. i have got an Error Diagnostic Code=de676679. a code with a 8 numeral should indicate that a Maxtor Drive drive is broken,and is in need of replacement. thats all i know where should i send this code for a real analyz?, cant find anything on Maxtor Website, Another question, there is allso an option to do a Low ore High level formatation of the drive. I have heard that this could fix corrupted segments, If so,this must only be possible on logical damaged hardrives, not psycial damaged drives right? i have waiting with reformatation cause im unsure what type damage the drive have, and this is my last alternative to do.? should i do a low/high level formatation anyway?
View 1 Replies
View Related
Apr 9, 2006
this error shows up. File is missing or corrupt: C:WinntSystem32DriversPci.sys Can I repair the file in windows or do I have to try the disk option?
View 2 Replies
View Related
Sep 14, 2005
I am trying to set up a home network to connect my laptop (with xp pro) to my desktop (with xp home) i am using a 3com office conect router as a hub. With the fire walls on each machine switched off I can see each of the machines from each other.I can share files on the laptop with the desktop, but when I try to access the desktop from the laptop I get the following message : xxxxxxx is not accessible. You might not have permission to use this network resource.
Login Failure : the user has not been granted the requested logon type at this computer.
View 17 Replies
View Related
Jul 2, 2009
I'm trying to share folders between two laptops set up on a home wifi workgroup. Currently, both laptops are "seeing" each other's share folders (as mapped network drives), and both laptops have full internet access I have allowed simple file sharing on the XP Pro system. I have also set the firewalls to allow access, and I'm using AVG firewall instead of Windows firewall.However, only one of the computers is allowing access to the other. The XP Pro computer can access the share folders on the XP Home computer, but not vice versa. When using the XP Home computer, I can map the shared folders on the XP Pro computer, but when I try to access them, I get denied access.
View 7 Replies
View Related
Jul 9, 2008
reinstall gets stuck even after bios is set for cd rom
View 3 Replies
View Related
