I attempted to repair windows (XP Pro SP2) using the windows cd. Due to some bad memory the repair did not work. I got multiple unable to copy *.dll files notices. I've corrected the memory problem.Now when I go to repair Windows using the CD the previous installation is not recognized. I don't get the "Setup found an existing windows installation, would you like to repair it" (paraphrasing, don't remember exact wording).
View 6 RepliesPC is left on pretty much all the time. Whenever I have to restart it for whatever reason it restarts normally, loading XP relatively quickly. However, if I have to shut it down for even a few minutes, Windows will typically fail to load most of the time. Usually it will hang on the black screen with the white progress bar, or sometimes on the loading xp screen. At this point it will sometimes start up when I reset it, or it will show the "Windows failed to load normally" screen. If I then start in safemode then restart it usually works, or even if I choose "start windows normally". I'm not sure if this is a driver or hardware/bios issue, I have reformatted once, and restored the OS using my XP disk a couple of times but the problem persists. I keep most of my drivers up to date. Tools like Sandra don't report any major errors (from what I understand anyway). I have just ordered new RAM, as I thought this would sort the issue, but it hasnt. I have to run my memory at 100hz so it will boot without any problems . If I run my processor at 200fsb then the computer doesn't boot and it doesn't start.
View 7 Replies View RelatedOriginally, the computer had Windows XP but when the operating system failed and I had no disk I tried to install Windows XP Pro using a disk I purchased.
These are the error messages I have been getting:
Windows Setup: Unknown Disk - there is no disk in this drive. A problem has been detected and Windows has shut down to prevent damage to your computer.
Setup did not find any hard disk drives installed
I used a �Boot CD� and got the following information:
Using fdisk - "No fixed disc present"
I am having trouble repairing windows it never finished the initial repair, it got to 9 minutes left and hung - and when I tried to restart another repair, the bootable xp disk never gave the option to repair again. The computer has XP sp1 on it and I have tried a SP1 XP and SP2 XP disks on it.
View 9 Replies View RelatedI'm trying to fix my friends Hp and I usually know what im doing. But here I have no idea what to do. I tried going into the bios to change the boot order to cd to format and I can't. Can anyone tell me what to do.I changed out his hard drive with mine and it does nothing. just posts and goes to a black screen instead of trying to boot and blue screening as it usually do when you change hardrives between two computers.Changed the Ide cables no luck.
View 7 Replies View RelatedI have reformatted many times and took the same steps I always do, Ctl F11, agreed to erase and continue, etc. When I was told to continue, instead of my computer reformatting smoothly, I was given an error saying that it could not be completed and a black screen saying only that an error occured and to hit Ctl + Alt + Dlt, I was brought back to the same black screen asking to restart.
View 4 Replies View Relatedworking on a Comcrap Presario (my favorite as some of you know ), older model, not sure what, doesn't really matter anyway.It has a 2 gig hard drive which is about 99.9% full, shows 80 megs of available ram (yeah, yeah, I know) --- user was trying to figure out how to change the registered owner and somehow came up with the brilliant idea of installing XP Got an error message about not being able to find enough space, imagine that Booted up to the dual boot menu for the XP install and 98, I edited the boot.ini file to get rid of that since the install failed, will there be any other files that can be deleted?
View 14 Replies View RelatedMy modem stopped working, received and installed new modem on Wednesday, computer worked fine. now system keeps restarting, when I tried F8 command, menu comes up, but when I try to enter anything, I get very quick "NT Detect Failed" and then computer keeps restarting.
View 7 Replies View RelatedI have windows xp installed on my computer, the home edition. packet 2, Anyway, I have been trying to get my computer to go to stand by but it keeps telling me. system standby failed, the device driver for the standar 101/102 key or microsoft natural ps/2 keyboard device is preventing the machine from entering standby. Please close all applications and try again. If the problem persists, you may need to update this driver. I tried to update the driver, but for this basic key board there is not a driver to update. It is the microsoft natural keyboard elite. Nothing special about this at all. Other than that my computer is about 5 years old and had windows 98 second edition on it, but would go into stand by then, but now that I have put XP on it, it will not go to stand by.
View 2 Replies View RelatedPrevious Attempts at booting this system have failed at checkpoint [EMem]. For help resolving this problem, please note this checkpoint and contact Dell Tech Support.Is there a way to resolve this without having to wait forever on the phone with Dells tech support?
View 3 Replies View RelatedWhen I look in the event viewer I can see above error message.Are these drivers not loading due to programs being updated or has something gone wrong with my system? Below is the list of files not loading.I have checked quite a few of these files and they are present in my "System32/Drivers" file.
View 1 Replies View RelatedI have a laptop, HP dv6000, with Vista previously installed. Yesterday, I created a partition on my hard drive and installed XP on it. So, ideally, I should have two windows system installed. Maybe in fact, there are 2 systems installed. However, the problem is after I installed XP, it directly loaded into XP without letting me choose which system I wanted to load into when I restarted the pc. In other words, I can not log in my vista system now.
View 8 Replies View RelatedNow when I start XP I get the option to load a previous version of windows or (default) install the new OS As I say the second option comes up as default and gives barely 2 seconds to select the first option and continue with starting the computer How can I eradicate the option to install the new OS?
View 9 Replies View RelatedMy friend has a laptop that was starting to fall apart on him. When it boots it will only go into safe mode. When you try to put in his password that he has had for a long time, it doesnt work. My question is this, can I repair XP pro with a xp home disc?? Or does anyone have any ideas as to get in to XP pro?
View 14 Replies View RelatedI can not bring up animated graphics on my screen. It will view most jpeg files but not gif files. I get a 'drawing failed' on the screen. When I call up a folder, only half the items show to the eye. The others are blank. When I call up a program, it says 'Insufficient system resources exist to complete the requested service'. I took screen shots through my print screen program and no problem to bring that program up. But when I go after them to put in Photobucket to post I get the 'Insufficient' message so I can't post them for you. It lets me do some things but not others?
View 8 Replies View RelatedI have a Toshiba tablet PC XP2;It boots up very slowly and I have narrowed down issue to two services which
when enabled cause the problem.Workstation and Network Location awareness services.When disabled, the machine boots fine. But is useless unless the services are started manually.
I'm dual-booting Vista (Vista came pre-installed) and XP, but in order to finalize it I need to get back into XP, booting off the CD. Can't do that anymore. I get a "mountmgr.sys is corrupted" "Setup Failed" error and the computer restarts. It didn't always do this, I've used it 5 times before.I paid $90 for this CD, and unfortunately I don't hvae access to another Installation CD right now.
View 1 Replies View RelatedI was trying to repair my desktop Windows XP Home installation.I have the original restore cds, but did not want to do a clean sweep, so I got hold of an XP Home cd, did all the repairing and copying of files, entered the key on the COA attached to my desktop, and all the process was fine. At the end, it asked me to activate the copy of windows, which I accepted because my key on the COA is all "clean". However, the process does not go anywhere, it only takes me to the desktop, which is blank and has nothing, not even the taskbar visible. The computer freezes.I have repaired other desktops and laptops I have at home before, and the process worked no problem, so I don't know what i did wrong this time.
Before I did the repairing on this desktop, I had disabled my ethernet adapter because I was connecting to the internet via wireless. So I'm thinking the problem is that the wireless card drivers got deleted, and the system cannot enable the ethernet adapter to connect to the internet to activate windows. First question is: Is this the case? Please help.I am not sure if the XP cd I got is an OEM version, or full retail. Second question: Could this be the problem? Finally, I was thinking of connecting an older hard disk that has a working copy of windows on it to my desktop (instead of the one I "repaired"), boot from it, and then activate the ethernet adapter, so I can then plug the original hard disk and hope the activation process to work.
i am living in costa rica and just recently purchased what i believe to be a refurbished hp nc6000. in downloading some items from microsoft, i confirmed that i have authentic xp professional installed. however, the previous owner could not provide me with the original cd, hense my dilema. in deleting some previously loaded software, i believe i inadvertantly deleted some shared files for other programs. is there anyway without the original disk to repair the installation or operating system. i have read about hidden partitions and the like, but am not confident enough to try this. i have the serial numbers and whatnot for my xp professional software, so i am not sure if having that info allows me to do anything without the actual cd. one of the problems is i have downloaded internet explorer 7 but it fails to completely install. i have gotten the most recent service packs and updates from microsoft but still no progress. i would go out to the local best buy and get the appropriate software new if i wasnt living in the middle of a third world country. there are computer repair shops close to me, but everyone has spanish operating systems and mine is xp in english and i cant afford to chance losing it. is there any way to recreate the software or operating system back to its original format with all original folders and files intact?
View 1 Replies View RelatedI'm trying to run the xp disc to repair some reg, file assoc files. Does anyone know a step by step on how to preform this?
View 2 Replies View Relatedi have a dell dimension 2400 - running XP Home, which was infected with numerous viruses and spyware - these were cleared - though due to its very nature a number of os files were removed/deleted. I then decided to run a repair of windows XP home to reinstall these files. However, on numerous attempts, the repair gets through to the Preperation Phase ok, and then gets stuck at the "installing Windows" phase, with 33 minutes to go - with the "installing Devices" box at around 80% bar completed.Has anyone any ideas what to do and fix this - apart from a clean install of course!
View 1 Replies View RelatedI am trying to repair my old xp which has bluescreen.I am lucky enough to have my windows xp installation disk. Problem is i cant get the computer to want to boot from the cd drive. I have 3 options: 1st floppy disk, sm-hewlett-pack and pm-samsung sv04
View 14 Replies View RelatedJust installed XP Pro last week no problems . Last night, my computer will not work.I try to Repair from the CD, but the I get the same error over and over.I get the same error even if I try to run set from scratch.
View 7 Replies View RelatedI shut off the computer and turning it back on couldn't boot up windows. It gave the windows wasn't shut down properly and I tried the normal restart option and it would just give a black screen with a blinking _ and then nothing happens. Tried loading in safe mode but it gets to mup.sys then "Press Esc to cancel SPTD.sys" flashes below and whether I press Esc or let it be, nothing happens after that.
I tried popping in the windows xp disc that came with the laptop, boot from disc, it starts up but then after loading everything, it then says "Windows is starting up" the disc stops spinning then nothing happens. I tried popping in a windows vista disc and it says "Windows is loading files" with a progress bar, when it fills up, I get stuck with a blank black screen the disc stops spinning and then nothing happens.
Some time ago I booted up my computer,to find that my XP switched to Windows classic style,I didn't take it seriously so I went to properties to change when I get an error message saying there is a problem with run32.dll,not only that,but the visual styles can't load I assume,becuase of run32.dll,so now I'm stuck with the piece of s*** style.
View 10 Replies View RelatedThe situation: A reasonably new PC, clean and working properly. Several new programs are installed, including Firefox, Winamp, desktop publishing, photo manager, and security software (not the antivirus, standalone scanners.) Everything appears to be fine.I log on to Windows Live OneCare to use their "Safety Scanner" to, as they say, check for PC health issues and optimize performance. Mind you, the site recommends users log on once a month for the full service scan. As you know, the scan includes the removal of what it refers to as invalid registry entries. "Oh boy," right? The registry. Except you'd like to believe the official Microsoft site won't screw up your programs.
View 14 Replies View RelatedI tried to do a System Recovery today on my Sony laptop. Got 41% completed and had a fatal error. Options given were Ignore, Retry or Abort. Attempted a Retry. Got a fatal error message and everything locked up. I ended up shutting down and when I turned the computer on again it said no operating system found. Where did I screw up?
This is a six year old Sony, XP, AMD 1.0Ghz. Everything was working at the time I tried the System Recovery EXCEPT I was constantly getting low space messages for drive C. I have no files on this drive and very little software. It is a 20G hard drive partioned into two 10G partitions.
Should I ever use one of the utility programs to wipe my hard drive completely, how do I reinstall Windows XP since the CD driver has been erased? How can you reinstall an operating system that is on CD when you have no driver for the CD player? The reason I am asking these questions is that I might want to give my computer to friend and I want my stuff off of the hard drive and my friend to be able to use the computer.
View 8 Replies View Related
I have been trying to create an XP Disk. After following 8 pages of instructions, I was finished. Everything seems to work, but when I boot the disk (I put it first in the boot sequence) here are my actions, and the results, A blue screen comes up stating that it is loading a whole bunch of files e.g. kernerl debugger dll, USB hubs, drivers and so on and 'Windows Setup' at the top A block of writing comes up:"Welcome to Setup. This portion of the setup program prepares Microsoft (r) Windows XP to run on your computer To set up Windows XP now, press ENTER. this is the one I choose i press ENTER a message comes up that says:
"Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running manufacturer supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3." and thats the problem.
Last week, my home page was hijacked by spyware (I think), it was actually 2 pages in length, the bottom of first page was a note "Removal instructions". I have windows XP SP2.I was able to go into the registry, with the help of another forum, and delete the offending file. Now my home page is white with my general icons, (I used to have the pretty beach picture of windows XP). I can't seem to restore the picture.I have also discovered the same file in "my computer" in system 32. When I press delete the icon disappears for about 3 seconds and then returns. The files name is "Twain Tech" and in system 32 as "Twunk 16" and "Twunk 32"
View 14 Replies View RelatedI run a small buisness repairing computers. When i get a computer with XP installed and the customer does not have their cd's i can't put XP back on it. Why can't i use my XP cd and their product key number. I tried this and it still won't work. Does any one know a work around. I am not trying to do anything illegal. The computer came with XP and was paid for/registered already. I just want to reformat it and get it up and running.
View 14 Replies View Related