Stop c0000135 {unable to locate component} This application has failed to start because winsrv was not found. Re-installing the application may fix this problem,
But you can't get anywhere on the computer, I tried tapping F8 to get to safe mode if it would let me but it keeps saying keyboard failure. Is there something else I should tap for a DELL computer to get to safemode?
I try rebooting but it always shows up in safemode.Although it appears when rebooting to be in normal setting because I don't see safemode checked in start up.
I was having disk partitians when I was trying to restart and run safe mode.Instead, I went to run, config and clicked on safemode in there under one of those INI tabs and now my PC will not boot at all. I have no Xp start up disk either. So I am unsure how to get my pc to boot at all now Can anyone suggest how to get my PC to boot backup? Anyone send me in the right directions or send me a way to get some files?
Hi! I've been working on a friend's kids pc that had 250+ viruses on it and it would only boot in safe mode. I removed the viruses, and attempted to run chkdisk/f, the system said it had to reboot to complete chkdisk, I rebooted and forgot it would only boot to safe mode and now it hangs at loading the mup.sys driver. I'm unable to get back into safemode or anything. I was able to launch the emachine recovery cd, but all I could get to run was ghost, and it advised running chkdisk cuz the drive has errors, I'm stuck, should I try and use my pc's winxp disk and try the recovery console on it? At this point we're ok with formatting and starting over anyways.
I am new to this forum, so plz bear with me. I have the same problem as a previous poster with win xp. I was attempting to repair a flooder virus in my winlogon file(I know now it was an AVG glitch) and when restarting the computer my system went into a continuous start up loop. When I attempted to repair the os by replacing the file using the XP Cd; the computer goes into safemode, I get the error "xp setup cannot run under safemode", and the system reboots (repeating the process over and over).I don't want to do a clean install of xp. I've searched the web for hours trying to get answers and nothing.
Mine is actually a spyware/virus issue but this forum seemed the more appropriate place for this particular set of problems.I'm working on a friend's computer (HP Pavilion ze5400). Windows will load normally but it is impossible to do anything useful from there for a number of reasons:RUN is not accessible. It does not appear on the start menu and pressing windows+R brings up a message that the feature has been disabled by the administrator.The control panel is not accessible for the same reason.Task manager? Nope. Disabled. RegEdit will not load even when manually found and executed through explorer...again, disabled.and of course, the username I'm using IS the administrator. Fun things, eh?Safemode starts to load then hits a BSOD that I can't read because the computer immediately reboots so the error only flashes for a fraction of a second.
my computer restarts continuously and I can't get into safe mode! I tried pressing f8 and going to safe mode or the last known good config, but the computer just restarts all over again..
My PC (Win2000) will run in safe mode, but in normal it just gives a blank screen, it plays the windows startup music but its not the same. I don't know where to start.
I reformatted my drive. I performed a clean install of windows xp. My drive has already undergone a FIXMBR All hardware not essential for a working computer are not connected. Only my harddisk, Geforce4, processor, and RAM are connected.When I let windows xp professional boot normally or in safe mode, i randomly get one of the following.pci.sys missing or corrupted, use recovery console to.asapnp.sys missing or corrupted, use recover console to.or boot into black screen, computer dies.
I recently had troubles getting my Lite-On optical drive to run in DMA mode. I updated the JMicron drivers for it and it was working fine. I don't know if this has anything to do with it but the JMicron update had two options, one for SCSI and one for Standard IDE. I did the first one and everything was working then I did the second one and now XP won't start. I don't know if it is just chance or what. XP just keeps restarting after the logo with the status bar. I have tried unchecking the "Automatically Restart" under system failure options to see if there is a blue screen but it still just restarts. I have also tried a system recovery to back a week ago to no success. When starting in safe mode and loading drivers a message comes up that says "ESC to cancel loading SPTD.sys" or something like that. I don't know if that has anything to do with it either.
I have noticed a few things missing, the last 2 bolded out I know aren't of any importance but, the first 2 I am not completely sure of.
Logfile of HijackThis v1.99.1 Scan saved at 12:09:16 AM, on 1/25/2006 Platform: Windows XP SP2 (WinNT 5.01.2600) MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Also, When booting into safe mode to run my PC Tools AV, SpyBot Search and Destroy, AdawareSE, PC Tools Spyware Doctor and Ewido Anti-Malware. My CPU usage is at a constant 100% when and, only when, I am scanning with PC Tools AV. It takes about 6 hours to scan my whole computer. Is there any way I can lower my CPU usage?
I have a Dell Dimension 3000 running XP Professional. I have an 80G HD and 2GB RAM. I have downloaded and attempted to install Mediaplayer11.On the reboot I get the dreaded blue screen with the error 0X00000019 (0X00000020, 0X8A3400270, 0X8a34002A0, 0X1A060006) I then have to go to the safe mode and do a system restore
I have a Toshiba Laptop with Win XPPro. Won't boot-up to Windows. I first get a blue screen error message and then a black page with options: Safe Mode- Safe mode w/ Networking- Safe Mode w/ Command Prompt. None of these work; when I select one it just cycles back to this menu. I tried Win Logo Key /r but nothing. I can get into Set-Up. The computer was acting kind of fishy before it quit; the cursor would start moving left across the screen and I couldn't control it. I would shut-down and it would be ok, until it happened again. I did a Restore to try to repair it but the next time I turned on computer
I changed the BOOT.INI section of msconfig to boot windows in Safemode. Upon getting in Safemode, the computer finally recognized USB devices and the CD drive again (wasn't doing so in normal mode). So, I insert a Windows XP disc, used the Advanced install mode (the one that overwrites the previous installation of Windows), and everything seemed to be going great.
However, the machine restarts and tells me this "Windows XP Setup cannot run under Safemode. Setup will restart now." and has an OK button. I click it, thinking it's going to boot into normal mode. Well, it doesn't. It boots up again, says the same thing.I click OK.Restart.Again.OK.On and on into infinity.
I'm pretty sure I had a trojan or something cause my computer kept getting worse. I tried several scanning programs but none of them cleared it up completely.Anyway, now I can't even get past the windows loading screen, and if I try to log in through safe mode, I get stuck at the screen that says "SyS.multidisk" or something.Is there any way that I can log in dos mode or something and completely wipe my system clean and reinstall windows xp? I don't have the disk, it came with windows XP already on it. I don't care if I lose all my files, I just want a working computer again, free of any trojans or anything.So, can I somehow log in dos mode or something (I don't even know how to do that), wipe everything clean, including whatever virus screwed up my comp, and reinstall windows XP without the disk? I'm assuming I have a copy of windows XP saved on my hard drive or something, cause my computer came with windows XP already installed and they didn't give me a disk.
I went out of town for 2 weeks, came home and my pc is acting really strange. I've been getting tons of pop-ups, to the point my computer freezes and i must restart. Not only that but it randomly reboots itself even when not being used. Also, when i go to delete files now, the file does NOT go into the recycle bin. I looked at the settings and there is no check mark next to the "do not move files into recycle bin". My BF said he had been downloading things so I figured maybe its a virus or something. I ran Nortons... nothing. Ran AVG... nothing. A friend told me it sounded like spyware so he told me to run Adaware & Spybot. Did that, found a ton of stuff. But when i retarted the pc, it wanted to start in "safe mode". I noticed that most of these pop ups are (search miracle ??) Found info that its a trojan, but i dont know. . I dont know what to do, totally computer illiterate.
Do xp sp3 useful to a home PC? I have read in the mircosoft website the following : "This installation package is intended for IT professionals and developers downloading and installing on multiple computers on a network. If you're updating just one computer, please visit Windows Update at http://update.microsoft.com ."My question is if the sp3 is worthful to install on home PC. Bcz, I have installed a vista theme for xp which will not work on sp3.
Was never able to restart after that. Normal boot shows the windows initial screen, but eventually just restarts, safe mode does the same thing whether it's with network, command line or plain safe mode. Last known good configuration does the same.Needed to use a file so decided to remove the HD and re-install to another PC. I did have access to the file in question but now I'd like to fix the problem. The other system uses AVG. I started a scan and it detected Cekar.d (A0003977.exe, wdfmgr.exe and initially ntldr.exe), Dropper.Inor (ntdetect.hta, A0003979.hta), PSW.Generic5.ABVW (ctfmona.exe), PSW.OnlineGames.AAFI (ctfmonb.exe), PSW.Generic5.AFYK (ctfmond.exe), PSW.OnlineGames.ZWT (LotusHlp.exe) and some others but for whatever reason the scan stopped. I restarted it and now the AV still finds most of the threats it was seeing before but not Cekar.d. in the ntldr.exe file.
Hi, I have a copy of Windows XP home OEM and I was wondering if when I built my new PC if I would be able to resuse this copy? Its just the Regular XP home OEM cd you used to buy from Newegg.
Kindly advise me how to changemy computer ID in XP home. When I purchased my laptop while travelling abroad the dealer initiated the computer and typed in an ID. This ID "YOUR-AYZ9QSTP1" appears whenever I communicate with other devices. I need to replace it with an appropriate personal ID.
I have a laptop taht had Me on it. I tried to update to Xp home edition the system ran and I ahd choose the option to save my files. However once completed the screen goes black and I have no main screen or menue area on my computer
I'm fixing a computer for someone at work. He had an Emachines computer where the ps failed and took the mobo with it.Hard drive is intact and i'm hoping to still use his license of windows and just update it or something. Is this possible, or does he have to go and repurchase windows now? Also, he's upgrading to a core duo processor and mobo, and on the back of the mobo box it says, "Intel EM64T requires a computer system with a processor, chipset, BIOS, OS, device drivers and applications enabled for Intel EM64T. Processor will not operate (including 32-bit operations) without an Intel EM64T-enabled BIOS."Does this mean he needs the 64 bit version of windows now as well, or is regular xp home fine? Is this true for all 64 bit processors?
Recently I used the task manager to schedule some anti-virus and anti-spyware programs at different times of the week, now, when i awake in the morning my computer is running, even though it is not a scheduled run, it automactically comes on every day, even during the course of the day ? My OS, Home XP V2002 SP2.
I have a fairly new computer PCU 70 Home Series, running Windows XP Home Edition. For protection I have: McAfee Firewall Norton Anti-Virus Spybot Search and Destroy Ad-Aware SE Personal CW Shredder iClean and the XP Security Centre. System seems to be running slow and not it self. Downloaded unregistered version of 'Registry Mechanic' telling me I have over 350 errors with system, but don't understand what or where these are.
I want to access my home computer via the internet when I work in my office. My home computer is behind a router. I enable the virtual server function of the router. How can I do next? I had installed the VNC/Netmeeting/Dameware in my computer. I knew the cable connection's static IP address and my home computer's virtual ip address.
ou can go to windows explorer and access C drive or D drive or the others but when you open My Computer-where it usually had the C:drive and the cd-rom drive etc it just shows the little flashlite lookiing for them but never finds them. Is there something I can do to get the icons back into my computer?
I have a 4 year old Dell Dimension 3100 desktop PC which when I turn it on first thing in the morning everything seems to be slow coming on. I have Avast AV, SuperAntispyware and Malwarebytes which I scan with daily. This morning it took about an hour before I could use the computer, the SuperAntispyware banner which comes up every morning came up this morning and just froze on my screen, this stupid box which has something to do with my wireless connection kept popping up asking me to enter my username and password, I kept hitting cancel to make it go away, it wouldn't go away.
I am trying to figure out if the battery is bad in a computer. Turned it off one night and all was well, turn it on the next day and the desktop is differnt one, home page went from google to msn, and the e-mail had to be redone from the start. (out look express) No I am finding more and more things like, the windows tour gude that normally comes up when windows is first put on starts coming up, the files and settings transfer wizard shows up in the start menu even tho it was not used. Spybot was already on the computer but went to start it and had to go through it like you were just putting it on the computer. All these things can it mean something?? I updated and ran spybot and it caught one thing called minibug, fixed it, ran a full adware 2007 scan it caught nothing. have antiviurs up to date, this computer is clean as far as I can tell,
Put a clean install on a computer and it runs great. Only one problem. Some pages when they open do not cover the whole scree like they should. This is hard to explain. When you open the internet the screen is as wide as if should be but what you bring up on the page covers about 2/3s of the page from the middle out. it leaves a couple of inches on both sides. It shows the scroll bars and all its the picture that comes up. If you click on the zoom and make it like 125% it is just right but how can you keep it there? Everytime you change pages you have to use the zoom again if it is the same way, not all pages are like that, but some are
since then i have reformatted my hard drive and used other operating systems on my computer. if i reformat and install windows xp home again, will the key that came with my computer work?i won't be using the same disks that came with my system, i will be using a generic purchased version but i will use the serial that came with my system? is it going to work?