I'm new here and have no idea what I'm doing with computers.
But I need help because my laptop isn't working. The problem is that when I get to the login screen there is no user account to click on and instead shows me just a blank spot where the button should be. I have tried using control-alt-del and it pops up as a different login screen, but when I try to login it says "cannot log in interactively".
yesterday i dl logonloader to change my logon screen. i went to deviantart to dl a new picture. it was a zip file and i used winrar to extract it. i logged off my computer and a black screen with a box popped up. it asked where to extract the file to and it automatically gave c:/windows/system32 as the location. i hit install and now i get an error message saying incorrect path. i cannot get back into my computer. i've tried extracting to other locations. windows support had me install another windows on my computer..so now i have 2 operating systems. but i still cannot access the other system to retrieve any files. is there anything i can do short of allowing everything to be erased and have the computer restored?
View 5 Replies View RelatedI need to find a way to get into one of our computers, the individual who was using it is no longer with us and everytime we try to to use it. THE windows logon window comes up. it has a USER ID in it but no password..the password that the individual left us does not work I have tried so many ways I cannot seem to get in.
View 2 Replies View RelatedI am facing difficulties to logon to my laptop. It runs on Windows XP SP2 and it has been working fine for the last 9 months. I have installed a software called "cnbtech" which is used to installed drivers for a camera.I restarted my laptop and the laptop stops in the Logon page. The weird part is that the user icon is not displayed on the screen.So the pressed "ctrl+alt+del" to open a page which shows my name as the user and it request for a password, but i do not have any idea about the password as i did not set any password before. I tried to enter the administrator mode but it request for a password as well, and i even tried to run on safe mode but the password is still being asked.There are so many important documents saved in it so i cannot afford to reformat my laptop. So i have removed my hardisk and connected it as an external hardisk to another laptop. Here i can view all the softwares and docoments stored in my hard disk.My opinion is that the "dll files" which are assigned to the Windows Logon might have been corrupted. I want to replace the dll files with a new one from another laptop. Now my problem is i don't know which dll files are assigned to the windows Logon.
View 2 Replies View RelatedTurned on the computer this afternoon, clicked my identity to log on to windows, entered my password and the logon process proceeded. However, at this point a strange little Windows-like box pops up withe a yellow triangle, a "yes" button and a "no" button. There is no other text in the box. Not being sure what the heck it was, I clicked NO and the computer booted up as normal. This box has appeared on each subsequent reboot. I have run AdAware, but Spybot S&D fails to respond each time I try to launch it (related?).
View 13 Replies View RelatedMy laptop Pentium III windows XP home originally had win98. I did a fresh install of Win XP home with no logon. I use a bios level password so no further password is desired. I had someone enter some data into a database for me, and while they were using the computer they decided to create a guest account. Now I am stuck with a logon prompt. I have tried to eliminate the guest account but can only disable it. The logon prompt is annoying, how can I eliminate it?
View 4 Replies View Relatedwhen i restart my pc windows asks for a password .i dont put one in and it starts up when i tried to change this in user acounts i get a message client services for netware has disabled the welcome screen and fast user switching. to restore these features you must uninstall client services for netware. how do i do this. i cant find clients for net ware.
View 3 Replies View RelatedI had to install net framework for a program to work.Now I have to log on to windows.Is their any way around the log on?
View 4 Replies View Relatedcannot access my PC. Running windows 2000 pro PC as it is not taking what I thought the logon password is. I am locked out. I am not super technical and would like a shortcut. I did receive a tip, but it was for XP and is only good if you are already in. I need to retrieve a critical word doc.
View 6 Replies View RelatedI used to auto-logon to an account (the computer would automatically log on to the accoun t, entering the password and everything), but now I have deleted the account, I want it to auto-logon to my account, now. Every time a switch on my PC, that annoyintg bleep sound in windows goes off and a message appears saying it could not login to that account, well, obviously it cant because it has been deleted, how can I make it auto-login to my account?
View 8 Replies View RelatedI recently upgraded to windows xp professional from windows me. I was not having any problems when I started the pc until after I installed the .net framework updates from the windows update site. Now when I start or restart my pc it starts with the administrator setup instead of the way it had been. I need to go to start/log off and select switch user in order for it to switch to the way that it had been prior to the .net framework updates.I tried going to the control panel and selecting the user account and selecting to change the way users log on or off and both the "use welcome screen and use fast user switching" are checked off. I am listed as a computer administrator but there is also a user account titled administrator which is also listed as a computer administrator.The administrator account is the one that is automatically opening now when I start the pc but I want it to open to the user which is me (and that is how it was opening prior to the install of .net framework).
I also tried going to start / run / control user passwords2 on the user accounts I removed the check mark from the box for "users must enter a password to use this computer". I then selected okay to the automatically logon box that popped up with my user name. I did not enter a password since I never entered or had one to begin with. I then clicked on okay..I then tried going to control panel / user accounts and then to change the way users log on and off and unchecked the box for both "use the welcome screen" and "use fast user switching". However when I clicked on okay I get a screen that states that "fast users switching cannot be turned off while multiple users are logged on. Make sure all other users are logged off, then try again." Does anyone know how I can get Windows XP to open/start that way again without having to always go to start /log off and selecting to switch users all the time?
How can I prevent windows from reverting to the logon screen after a period of inactivity? I am using Windows XP Professional SP-2 in a Work group. After logging in with a password, the screen comes up again after a few minutes of inactivity and I have to provide the password again. This happens continuously throughout the day.
View 2 Replies View RelatedMy computer starts up normally.It always just autologs on since I'm the only one using my windows xp computer. However, before anything can be displayed it immediatley logs off to the logon screen. I click my username and start the login process (i have no password and before even switching to my wallpaper or anything it says stuff like logging out and saving your settings.
I tried booting in safe mode too and the same infinite logon loop occured to, even with the default administrator account. The last thing I remember doing before this happened is I was playing City of Heroes when it crashed forcing me to restart my computer. This happens occasionally in certain programs but I've never had anything like this happen before. I tried unplugging my keyboard, mouse, usb devices, ethernet cable, no luck. Intel Pentium 4 1.7 ghz Geforce 5600 FX 256 mb windows xp home service pack 1, in case any of that matters
I've seen another post somewhere and someone else had this problem, but I haven't found a solution. We're using WXP Pro, SP2. After doing a repair install (the other person just had it after using Windows Update), at logon, after entering the correct, AND VALID, password either for a user Or the Administrator, Windows Logon displays the following Logon Message in a box: "!The system cannot log you on due to the following error: "The program issued a command but the command length is incorrect. "Please try again or consult your administrator."
No matter how many times logon is attempted, or with what account, the message continues to be issued. Thus, NO ONE can logon to the GUI. The Recovery Console can be used to logon as Administrator, but no password is requested even though there is one in place. I've searched the MSKB but didn't find any reference. Implementing "Last known good configuration" does not fix the problem.
When i boot up the system hangs at the blue 'Windows xp' screen, the 'Windows is starting' is missing and it goes no further, the logon screen does not appear so i can't get in. I have recovery console on and i can get into the drive by booting in from another drive/operating system
View 1 Replies View RelatedI went into the User Profiles in the control panel and disabled all the users (thinking this would stop me from having to log in every time). Then, I shut down the computer and rebooted. Imagine the butterflies when I seen the "Logon to windows" box pop up. Nevertheless, I entered my password and it says user has been deactivated or something and says "see your administrator". Well, I am the administrator - What the heck did I do. Tell me its not the end of the world for my computer. How do I get back into the system and reactivate my user account?
View 4 Replies View RelatedI just installed a program that requires dot NET Framework to be installed.
Now when I boot up I have to press enter at the log on screen(i don't have a password to start windows).
What can I do so I don't have to press enter everytime I reboot my computer?
I cannot logon to xp. I don't have the icon logon so I can read to you exactly what it does
Loading your personal settings (this one goes fast but I think its playing logon sound)
Restoring network connections (during that I see my desktop background) something skips quickly through here, i think its executing WGAlogon.dll or something Saving your settings (background disappears)
and now I'm back in the logon box
I really don't have much information other than I can't login
Is there any way to make a user by only editing files?
I have system restore points but I cant get to them because I can login to the user even in safe mode, any way to get to those?
I only have 1 user so Ignore my messup right there, not creating a backup user.
I recently attempted to install a program that installed Microsoft .Net Framework 1.1. The installation of the original program didn't complete so I uninstalled .Net. Now, when I turn on my computer the log on screen doesn't appear - it just goes directly to the desktop. This isn't a problem because I only have one user account, but I just wanted to see if my ininstalling .net had something to do with this, or if not, what else could have caused this to happen spontaneously? (I don't like it when my computer starts doing things I didn't tell it to do
View 2 Replies View RelatedThis may be a coincidence but I installed a new anti-virus program on my laptop and and rebooted. When it restarted, I was presented with a user login screen and the only available account was "Guest". I have never previously had more than one user account and it always booted straight into XP using my default administrators account called "Peter".
I don't know how to recover the situation as when I login as Guest now I have no admin rights. I can see the "Peter" folder still exists under Documents & Settings and I really don't want to re-install XP Home if at all possible.
when i trying to access shared folder on the other PC on my LAN, the logon page only allow me to logon with guess account, the user field is disable and you cannot access with other user name, what you can do is key in the password.
View 2 Replies View RelatedI lost my windows logon password. How can I log on to my computer?
View 2 Replies View Relatedpc has gone back to the logon screen, which is fine, but its asking for a password per user and we have no passwords defined! So I dont know what to key, have to reboot it then it forgets about asking for these passwords which have never been created
View 12 Replies View RelatedI started getting a prompt when I would boot up to select a user and logon. I did some reading on what to do to get rid of this and think I screwed something up. I have xp pro and it came preinstalled. I don't know what password they used for administartor. Whatever I did I lost everything in the user accounts but my own. I don't even have a way to add users anymore
View 4 Replies View Relatedpassword not working. forgotten? How do I get in. I have looked at the program that a few people have recommended, making new boot disks, etc. Great if you are a computer engineer, but for the rest of us dummies you might as well ask me to build a rocket ship to pluto.
View 1 Replies View RelatedI am trying to boot up a PC that allows me to log on and then I get a brief(1 sec) desktop background and then goes straight to logoff. It's running XP Prof and I went to recovery console and did a chkdsk /r and it said it fixed 1 or more errors. I ran it again and it was clean. It still won't work even in safe mode.
View 1 Replies View RelatedThe problem started when I read a magazine article about removing the "Logon Box", when the system boots up. It said you should go to the "Run Command" and type in "Control userpasswords2"
That took me to the "User Accounts" and on the first page there were two users listed. The first was the "Administrator" and the second was "Me"(Which was myself)
You may experience extremely long delays (up to 5 minutes) when logging into domains using Windows XP Pro. This is caused by the asyncronous loading of networking during the boot up process. This speeds up the login process in a stand-alone workstation by allowing the user to log in with cached logon credentials before the network is fully ready.To disable this "feature" and restore your domain logons to their normal speed, open the MMC and add the group policy snap-in. Under Computer Configuration-->Administrative Templates-->System-->Logon, change "Always wait for the network at computer startup and logon" to ENABLED.
View 9 Replies View RelatedI am having this really anoying problem with both of my computers they are:
1. Custom built ecs board p4 xp home system
2. Dell latitude c600 xp pro sp2
For some weird reason both of my computers hang right after the logon screen. Its weird because all I have to do is give it the three finger salute and go under shut down and then log off then I'll get the explorer.exe is not responding message I hit cancel or stop terminate whatever it is and it goes back to the logon screen I then logon and it boots into the desktop like it should normally.This is really weird because it happens to both my xp home desktop computer and my xp pro notebook computer. This is really anoying and I can't figure it out. Ive tried runing anti spyware progs like Ad aware and spybot but nothing really comes up.Please help This is getting especially troublesome when my kid is hounding me to put on his spongebob dvd on my notebook and I have to deal with this while booting up. What I have noticed is that (on both computers) the taskbar does not come up all I get is my background picture.
I want to change my logon screen but i get an error that says a recently
installed progam has disabled fast user switching. I have no idea what the
program is and it contains a ile called " ginamsi.dll "
Having looked at a few previous threads on your forums, you seem to be pretty intelligent so I guess this is the best place to post my problem, Recently I purchased one of those quadcore machines (Q6600) with a blank HD, so installed XP Pro + SP2. There was errors when installing SP2 (and SP1, when I tried that), where by it gets so far, then just freezes. Having left it for hours to try and resume, it didn't, and I was forced to end the task. When I rebooted the machine I was prompted to uninstall SP2 as it wasn't installed correctly? This wasn't an option for me, as I NEEDED to install msn IM lol anyhow.When I boot my machine up, just before the logon screen loads where it says something along the lines of "Windows is starting up...", it just stays on that for ages (several minutes!) before continuing to load the logon screen. Once the logon screen appears, everything else is fine.
View 1 Replies View Related