I used to auto-logon to an account (the computer would automatically log on to the accoun t, entering the password and everything), but now I have deleted the account, I want it to auto-logon to my account, now. Every time a switch on my PC, that annoyintg bleep sound in windows goes off and a message appears saying it could not login to that account, well, obviously it cant because it has been deleted, how can I make it auto-login to my account?
Using Windows XP Pro SP2. As I'm the only user on a standalone PC, I didn't use to bother with a password and Windows would log me in automatically.
Then I found I had to have a password in order to get Task Scheduler to work, so I set one, then used UserPasswords2 to again set my account to log in automatically.
This works fine except that I cannot now find a way to access the built-in Administrator account.
Before I used UserPasswords2, I could get to the Admin account by starting in Safe Mode (the trick of pressing Ctrl-Alt-Del twice I've seen here never worked for me, apparently because Windows thinks I am part of a workgroup rather than a domain). This worked whether I had a password set on my own account or not.
Now, however, I get automatically logged in even in Safe Mode, with no chance to choose the Admin account.
IS there any way of doing this so that I can keep auto login, keep Task Scheduler happy and still get to the Admin account if I need to?
I have installed XP as an upgrade from W2K to my wife's computer, and I recall that in the W2K installation the auto-logon feature was enabled. Now I am trying to disable this feature, so far without success. I have even used TweakUI and still the auto-login feature runs every time I reboot. I looked under the Group Policy editor, following my Administrator's Pocket Consultant for clues, and there is no effect.
I have Tweak UI set to auto logon for me and it works fine once then it resets itself and turns that off. I also have ultramon setting my backgrounds and they never stick after a reset of the computer. I wanna say this has something to do with me installing and uninstalling mcafee and norton a couple of times. (i have only norton now).
This may be a coincidence but I installed a new anti-virus program on my laptop and and rebooted. When it restarted, I was presented with a user login screen and the only available account was "Guest". I have never previously had more than one user account and it always booted straight into XP using my default administrators account called "Peter".
I don't know how to recover the situation as when I login as Guest now I have no admin rights. I can see the "Peter" folder still exists under Documents & Settings and I really don't want to re-install XP Home if at all possible.
when i trying to access shared folder on the other PC on my LAN, the logon page only allow me to logon with guess account, the user field is disable and you cannot access with other user name, what you can do is key in the password.
Can anybody tell me how to add the user account logon information?
Specifically, When on the Logon Screen there is information pertaining to the Users Unread Email Information. I have changed to a new email address (because of SPAM). I would like to activate so it sees the new email account and reflects accurate number of unread messages. (I have been helped by someone earlier to remove the old email info...but need help to put on the new info.) Any suggestions?
I run XP Home Ed SP2 on my home pc. Myself and my wife have user accounts.
When i login to my account it takes for ever for the desktop to appear and all the automatic programs etc to start up (i use sophos antivirus & EZ Firewall). I cant even get taskmanager to appear until everything has loaded. I have to go for a smoke while waiting for it to finish.
My wifes login however is instantaneous - everything appears quickly and ready to go in no time.
I dont understand this - i assumed the same programs were running cos they are installed on the psame pc.
Is there a program i can run to show me what is loading from the log on screen so i can compare between the two user accounts? or can anyone suggest something to quicken mine up?
I'm having some problems with my computer that started yesterday afternoon. I was on it that morning and it worked perfect and i shut it down properly before school only to find that when i got home it wont let me logon to a windows user account. After booting the windows user account pops-up and after selecting my account the computer will shut down. A friend of mine said that there might be something wrong with the winlogon but i cant find any info about that online. Right now im using safe mode with networking and i also tried accecsing the boot menu and selecting "disable automatic restart after system failure". Now rather than restarting it gives me a blue screen that reads:
A problem has been detected and Windows has been shutdown to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
*** Ntfs. sys- Address F82d876D base at F82B 8000, Datestamp 41107eea
Beginning dump of physical memory
physical memory dump complete.
Contact your system admin or tech support group for further assistance.
I have ran the CHKDSK /F with no problems found. And i hope that with this information you may help me fix this very annoying, and most random computer problem.
Can anybody tell me how to reset the user account logon information?
Specifically, When on the Logon Screen ther is information pertaining to the Users Unread Email Information. I have changed to a new email address (because of SPAM) and it still shows "XXX unread mail messages, x programs running" under a Users name. I would like to change so it sees the new email account and reflects accurate number of unread messages.
This error keeps popping up It will say whatever file im trying to access at the top ie: C:Documents and SettingsWindows XPMy DocumentsMy Music is not accessible.
Then below it says Logon Failure: account currently disabled ...
yesterday i dl logonloader to change my logon screen. i went to deviantart to dl a new picture. it was a zip file and i used winrar to extract it. i logged off my computer and a black screen with a box popped up. it asked where to extract the file to and it automatically gave c:/windows/system32 as the location. i hit install and now i get an error message saying incorrect path. i cannot get back into my computer. i've tried extracting to other locations. windows support had me install another windows on my computer..so now i have 2 operating systems. but i still cannot access the other system to retrieve any files. is there anything i can do short of allowing everything to be erased and have the computer restored?
I need to find a way to get into one of our computers, the individual who was using it is no longer with us and everytime we try to to use it. THE windows logon window comes up. it has a USER ID in it but no password..the password that the individual left us does not work I have tried so many ways I cannot seem to get in.
I'm new here and have no idea what I'm doing with computers. But I need help because my laptop isn't working. The problem is that when I get to the login screen there is no user account to click on and instead shows me just a blank spot where the button should be. I have tried using control-alt-del and it pops up as a different login screen, but when I try to login it says "cannot log in interactively".
I am facing difficulties to logon to my laptop. It runs on Windows XP SP2 and it has been working fine for the last 9 months. I have installed a software called "cnbtech" which is used to installed drivers for a camera.I restarted my laptop and the laptop stops in the Logon page. The weird part is that the user icon is not displayed on the screen.So the pressed "ctrl+alt+del" to open a page which shows my name as the user and it request for a password, but i do not have any idea about the password as i did not set any password before. I tried to enter the administrator mode but it request for a password as well, and i even tried to run on safe mode but the password is still being asked.There are so many important documents saved in it so i cannot afford to reformat my laptop. So i have removed my hardisk and connected it as an external hardisk to another laptop. Here i can view all the softwares and docoments stored in my hard disk.My opinion is that the "dll files" which are assigned to the Windows Logon might have been corrupted. I want to replace the dll files with a new one from another laptop. Now my problem is i don't know which dll files are assigned to the windows Logon.
Turned on the computer this afternoon, clicked my identity to log on to windows, entered my password and the logon process proceeded. However, at this point a strange little Windows-like box pops up withe a yellow triangle, a "yes" button and a "no" button. There is no other text in the box. Not being sure what the heck it was, I clicked NO and the computer booted up as normal. This box has appeared on each subsequent reboot. I have run AdAware, but Spybot S&D fails to respond each time I try to launch it (related?).
My laptop Pentium III windows XP home originally had win98. I did a fresh install of Win XP home with no logon. I use a bios level password so no further password is desired. I had someone enter some data into a database for me, and while they were using the computer they decided to create a guest account. Now I am stuck with a logon prompt. I have tried to eliminate the guest account but can only disable it. The logon prompt is annoying, how can I eliminate it?
when i restart my pc windows asks for a password .i dont put one in and it starts up when i tried to change this in user acounts i get a message client services for netware has disabled the welcome screen and fast user switching. to restore these features you must uninstall client services for netware. how do i do this. i cant find clients for net ware.
cannot access my PC. Running windows 2000 pro PC as it is not taking what I thought the logon password is. I am locked out. I am not super technical and would like a shortcut. I did receive a tip, but it was for XP and is only good if you are already in. I need to retrieve a critical word doc.
I recently upgraded to windows xp professional from windows me. I was not having any problems when I started the pc until after I installed the .net framework updates from the windows update site. Now when I start or restart my pc it starts with the administrator setup instead of the way it had been. I need to go to start/log off and select switch user in order for it to switch to the way that it had been prior to the .net framework updates.I tried going to the control panel and selecting the user account and selecting to change the way users log on or off and both the "use welcome screen and use fast user switching" are checked off. I am listed as a computer administrator but there is also a user account titled administrator which is also listed as a computer administrator.The administrator account is the one that is automatically opening now when I start the pc but I want it to open to the user which is me (and that is how it was opening prior to the install of .net framework).
I also tried going to start / run / control user passwords2 on the user accounts I removed the check mark from the box for "users must enter a password to use this computer". I then selected okay to the automatically logon box that popped up with my user name. I did not enter a password since I never entered or had one to begin with. I then clicked on okay..I then tried going to control panel / user accounts and then to change the way users log on and off and unchecked the box for both "use the welcome screen" and "use fast user switching". However when I clicked on okay I get a screen that states that "fast users switching cannot be turned off while multiple users are logged on. Make sure all other users are logged off, then try again." Does anyone know how I can get Windows XP to open/start that way again without having to always go to start /log off and selecting to switch users all the time?
How can I prevent windows from reverting to the logon screen after a period of inactivity? I am using Windows XP Professional SP-2 in a Work group. After logging in with a password, the screen comes up again after a few minutes of inactivity and I have to provide the password again. This happens continuously throughout the day.
When I insert a music CD, a window comes- up asking if I want real player or take no action.What I want is auto-play with windows media player and cannot figure this out.
My computer starts up normally.It always just autologs on since I'm the only one using my windows xp computer. However, before anything can be displayed it immediatley logs off to the logon screen. I click my username and start the login process (i have no password and before even switching to my wallpaper or anything it says stuff like logging out and saving your settings.
I tried booting in safe mode too and the same infinite logon loop occured to, even with the default administrator account. The last thing I remember doing before this happened is I was playing City of Heroes when it crashed forcing me to restart my computer. This happens occasionally in certain programs but I've never had anything like this happen before. I tried unplugging my keyboard, mouse, usb devices, ethernet cable, no luck. Intel Pentium 4 1.7 ghz Geforce 5600 FX 256 mb windows xp home service pack 1, in case any of that matters
I've seen another post somewhere and someone else had this problem, but I haven't found a solution. We're using WXP Pro, SP2. After doing a repair install (the other person just had it after using Windows Update), at logon, after entering the correct, AND VALID, password either for a user Or the Administrator, Windows Logon displays the following Logon Message in a box: "!The system cannot log you on due to the following error: "The program issued a command but the command length is incorrect. "Please try again or consult your administrator."
No matter how many times logon is attempted, or with what account, the message continues to be issued. Thus, NO ONE can logon to the GUI. The Recovery Console can be used to logon as Administrator, but no password is requested even though there is one in place. I've searched the MSKB but didn't find any reference. Implementing "Last known good configuration" does not fix the problem.
When i boot up the system hangs at the blue 'Windows xp' screen, the 'Windows is starting' is missing and it goes no further, the logon screen does not appear so i can't get in. I have recovery console on and i can get into the drive by booting in from another drive/operating system
I went into the User Profiles in the control panel and disabled all the users (thinking this would stop me from having to log in every time). Then, I shut down the computer and rebooted. Imagine the butterflies when I seen the "Logon to windows" box pop up. Nevertheless, I entered my password and it says user has been deactivated or something and says "see your administrator". Well, I am the administrator - What the heck did I do. Tell me its not the end of the world for my computer. How do I get back into the system and reactivate my user account?
One of my user account for window xp proffesional is missing.Orginally i had one user account and then i decided to make another one.When I was making the second one I had to choose adminstrative powers because it said that I didn't had any other accounts with adminstrative powers. Then after i restarted my original account was missing and I was like wtf! My files are all gone now.The original account name was Administrator. I still have the files for it in my C:Documents and Settings Administrator So how do I get it back?
Windows XP Home SP2 in a Gateway Performer 1300 P4 I recently purchased a used computer locally from a private party. It seemed to work fine. Once I got it home, however, I discovered that when I tried to install the drivers for my wireless adapter, the InstallShield Wizard would come up and extract the files from the CD and then go away and nothing would happen. When I went to the Windows update site, it would not down load the activeX control to check my computer for needed updates. It did the same thing. It would show that it downloaded the file and then nothing would happen. I talked to a local computer shop and they said they have had a lot of trouble with "broken" Windows Installers lately. So I went to the Microsoft site and downloaded the updated Windows Installer (as they suggested) and this did not change anything.
I've gotten myself in somewhat of a pickle. I have a system that I had built for my husband. I later built a new box for him and decided to sell the previous one. A friend wanted to buy it so I purchased a copy of Windows XP so they'd have their own license, but instead of rebuilding the box, I wiped all the pertinent programs and info they didn't have licenses for and changed the license number to theirs. The problem is, I want to change the user account name under c:documents and settings to reflect the new name.I have created a new ADMIN account, logged in as this account and renamed the account "mitch" to "don". All this does is creates a new user "don" and moves the "my documents" (I have downloaded numerous pdf files that I've created instructing him on how to update antivirus, antispyware and general info on computer use, security, etc. and placed it in the My Documents folder) from "mitch" to don".
