I am trying to boot up a PC that allows me to log on and then I get a brief(1 sec) desktop background and then goes straight to logoff. It's running XP Prof and I went to recovery console and did a chkdsk /r and it said it fixed 1 or more errors. I ran it again and it was clean. It still won't work even in safe mode.
View 1 RepliesI am posting here because after doing the usual in this situation, it didn't work.
Here's the deal: I am running Windows XP Pro Service Pack 2.
I recently had a virus that took control of every exe file. I spent yesterday destroying that mess and trying to get my virus scanner and malware detection to work again. I did. Once I was up and running, full scans turned up a variety of corrupted system files. I'm not sure how deep it goes but my first and most obvious problem is I have a login/logoff cycle.
I was attempting to eliminate some spyware and accidently deleted something that causes an immediate logoff from any account. I am using Windows XP Home. Any thoughts on fixing this?
View 1 Replies View RelatedIs there any way to set a laptop to logout of the current user when the lid is shut. I was hoping it would be an option in the power options in the control panel but no luck, the only options are nothing and stand by. I am working with a Dell Latitude D620 with windows XP professional.
View 12 Replies View RelatedMy computer starts up normally.It always just autologs on since I'm the only one using my windows xp computer. However, before anything can be displayed it immediatley logs off to the logon screen. I click my username and start the login process (i have no password and before even switching to my wallpaper or anything it says stuff like logging out and saving your settings.
I tried booting in safe mode too and the same infinite logon loop occured to, even with the default administrator account. The last thing I remember doing before this happened is I was playing City of Heroes when it crashed forcing me to restart my computer. This happens occasionally in certain programs but I've never had anything like this happen before. I tried unplugging my keyboard, mouse, usb devices, ethernet cable, no luck. Intel Pentium 4 1.7 ghz Geforce 5600 FX 256 mb windows xp home service pack 1, in case any of that matters
I've seen another post somewhere and someone else had this problem, but I haven't found a solution. We're using WXP Pro, SP2. After doing a repair install (the other person just had it after using Windows Update), at logon, after entering the correct, AND VALID, password either for a user Or the Administrator, Windows Logon displays the following Logon Message in a box: "!The system cannot log you on due to the following error: "The program issued a command but the command length is incorrect. "Please try again or consult your administrator."
No matter how many times logon is attempted, or with what account, the message continues to be issued. Thus, NO ONE can logon to the GUI. The Recovery Console can be used to logon as Administrator, but no password is requested even though there is one in place. I've searched the MSKB but didn't find any reference. Implementing "Last known good configuration" does not fix the problem.
so every time I log in to windows xp pro the system starts to load the user settings background and startup programs then I get a message that the system can't load one of the startup programs because the system is shutting down. then the system completely shuts off.After an exhaustive search online I found the recovery/copy userinit.exe wsaupdater.exe fix and tried that but I still get the auto logoff. I've tried repairing the installation using the OEM CD, but that only works for the first login. after that, same issue. I've run antivirus and spyware apps to check the system, but found nothing (I did this inbetween repairs). After 6 times of going through this I'm ready to reinstall from scratch. It just annoys me that windows can break so easily. Did I meniton I hate windows? Anything you could suggest, would be appreciated. I wait to here from someone in the forum before tackling such a HUGE project as to reinstall Windows and all my programs and data.
View 7 Replies View Related1. Start Regedit
2. Go to HKEY_CURRENT_USERSOFTWAREMicrosoftWindowsCurrentVersion PoliciesExplorer
3.Create a DWORD value named StartMenuLogoff
4. Give it a value of 1 Restart you computer and Logoff is no longer in the Start Menu
I have recently built and deployed an SBS 2003 server. Today I joined one of my machines to that newly created domain. In this process (adding to domain, redirecting My Docs, etc.) I lost the ability to logoff. Not exactly clear when that happened, but the current state is no good.I cannot log off using the start menu items. When the logoff or shutdown dialogs come up I can click the OK or Log Off and the dialog goes away, but nothing happens. I have looked at the task manager and really nothing happens. CPU doesn't budge. I can continue working as long as I'd like.
View 9 Replies View RelatedI am working as a system administrator in gameing company around with 90 systems..server is win server 2003 and all clients are Windows xp professional....I want to create batch file for user login and logoff information..That log file should have below information1) user name2) computer name3) Date of login4) Time of login. How can i do that...when user login to any client on my network...that information is directley store in server in a text file
View 2 Replies View RelatedWhen i boot up the system hangs at the blue 'Windows xp' screen, the 'Windows is starting' is missing and it goes no further, the logon screen does not appear so i can't get in. I have recovery console on and i can get into the drive by booting in from another drive/operating system
View 1 Replies View RelatedIn my computer I’ve two partitions, when I try to move one big file of 1GB to other partition it gives me this error “Cycle Redundancy Check�. But I can play this video file very well. But I’m unable to move or copy to another partition or DVD.Is there a way I can still save this file, some how? I know i shuld replace with new harddrive, but right now i want to save this file.
View 1 Replies View RelatedI recently had a new PC built for me by a friend of mine. It had some problems intially so he re-installed Windows XP and changed the RAM voltage to 1.90 in the Setup menu as the PC boots up.Anyways, he kept my PC for about 2 weeks while I was on vacation, running various programs and using it for all kinds of tasks on a regular basis, and everything was fine.I've had it home for a couple of weeks now. Every once in awhile something seemed wrong, but usually a good reboot would solve any problems...so no big deal. However, within the past week, it's had terrible troubles rebooting. This is basically what will happen.
A. It will boot up to the Windows loading screen, but right before it gets to the screen where you select a user, it crashes with a quick flash of the blue screen of death (I see it for like 1/5 of a second--so I can't read what it says) and reboots. Sometimes when it reboots I get the option to boot up in Safe mode. When the problems first started, I could boot up in Safe Mode, restart from Safe mode and everything would be fine. Now, however, I'm usually not so lucky.
B.When I finally get it booted up, I'll get some Error about a Registry file that had to be recovered from an alternate copy: Recovery was successful.After that, I usually get error reports for the following programs. These are the most common programs that will randomly cease to function, but there are usually some other error codes thrown in there too.
1. MSN Live Messenger
2. GoogleChat (internal error)
3. AcroTray
4. AVG anti-virus
5. Logitech Messenger
C. Here are some other errors I have recieved at random times. Some I've got only once in many reboots, others have shown up a few times. The most recent ones are at the bottom.
1. Nvidia Driver error
2. SoundMax
3. Smax4PNP
4. Exception has occurred while trying to run C: Windows/system32/NVCPl.dll/NVstartup
5. Some error with SetfilePoanter/Kennel32.dll
6. Runtime error System32/svchost.exe
7. Windows has recovered from a serious error.
C: Docume~1mynameLOCALS~1 mepWER9613.dir00mini082907-08.dmp
and WER9613.dir00sysdata.xml
My wifes computer is running XP. After an update from Microsoft last night the computer goes in an endless cycle of reboot. It will not let me reboot in Safe Mode. It gives me all of the options to do so but will default back to the general XP reboot
View 6 Replies View RelatedHi, I am running an old Packard Bell Easynote bought in about 2005, with an AMD processor and Windows XP. The power supply recently broke so I've been using a new one. I think its quite cheap as quite often the power suddenly cuts out, and I have to wiggle it about and then it works again.
The other day I turned on the laptop and it comes up with a black screen with message in white typeface saying that i didn't shut down properly last time, and therefore do I want to start in XP or in Recovery Mode. I go to XP and the following appears
Whether it's 1 in the afternoon or 1 in the morning my PC clock always says 13.00
I've got it set to sync with time.windows.com, and I've manually put it right several times but it keeps going back to this 12hr cycle.
I had a thread on here before, but it got deleted so I'm starting a new one with fresh new problem.I set chkdsk /r to run on system startup, and it ran but took forever to scan file data (I left it running for 4 days) so I rebooted but it started chkdsk again! Theres obviously something telling it to run the scan on next startup because it never finished the first time. Now if I run it it just freezes at 0% for checking file data.It I go into startup options and tell it to boot in safe mode, it shows it loading all the drivers and then pauses and says "Press Esc to cancel loading a347bus.sys" and whether I press Esc or not it freezes. If I do last known good configuration, it runs into the chkdsk problem again.
View 14 Replies View RelatedDespite advice to the contrary my youngest son has taken to shutting his PC off by turning off the power on the back of the computer. Now it wont boot. It starts loading windows (shows the splashscreen) but then reboots, goes into the set up option page, ie safe mode/safemode with networking/last known good configuration and so on. Only I cant get it into safe mode or last known good configuation...just reboots and goes through the whole thing again. Tried repairing windows with the install disk but get to Recovery Console and then I don't know what to do-I just get a command prompt for C drive , like its awaiting a command but I dont know what command to give it. I cant see any other option to repair the installation. I dont want to format the drive and reinstall Windows unless i can help it.too much software to reinstall and lost game data!
View 1 Replies View RelatedMy computer is in a reboot cycle, always asking the standard "boot windows normally, safe mode, last good known configuration..." It loads Safe mode fine. When looking at the minidumps it points to 'ntkrpamp.exe.' When I look that up I find a lot of hits about the RAM. I have 2 sticks in and I've tried swapping and using only one etc. with no luck. I was able to get the computer to work once after forcing a scandisk /r, but after rebooting it got stuck in it's cycle again. The minidump also says:ERROR_CODE: (NTSTATUS) 0xc0000218 - {Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable.
View 2 Replies View RelatedMy PC seems to be in a 2 minute beep pattern. After the beep I generally lose my mouse for a couple of seconds. I can live with the noise, I can't live with disruption.
I've rebooted and it still beeps. I've turned off the Google desktop, I've uninstalled a stack of applications that should have been gone ages ago. I've even found my 2003 startuplist.exe and run
It became very slow towards the evening and today I tried to restart it but it wouldn't reboot. It keeps going in the cycle from Windows starting up screen to Check disk screen and again back to black screen and rebooting.
Earlier today I was checking the C: and removing some of older applications which we are no longer using (via Ad/remove programs) and I have noticed that the C: and My documents looked strange. Lots of 'Found.???' files, lots of NFS(or something similar) files and for some reason number of pdf files (which originally belong to completely different folders).generally looked all re-organized and strange.
there are multiple trojans on my computer.and i know it because ive run mcaffee virus scan and they find them...can i delete them? no....why? because before its done and i can click the delete, i get a stupid error pop up screen saying mcafee has encountered a problem and needs to shut down.it gives me two options "close" and "debug" idno what debug is so i just close it..by the way this happens with a ton of random programs that i have (be it I.E. or AIM).also my coer does this weird thing where the whole screen goes blue with white
View 10 Replies View Related
I have the keyboard settings set to minimum delay before repeating, and maximum repeat rate. My problem is, no matter these settings, when I press and hold a key, it registers twice before starting the repeat cycle. For example:
I press and hold "A."
Computer registers: A...A...AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.
Obviously for a game that requires keys to be held down, this is a major problem. I also know for a fact that this happens with every key, and that the problem is with the computer, not the keyboard (I have tried many different ones). I don't know if my driver was installed twice or something, that seems to be common, but I haven't been able to find any solution to this problem.
I just got a hand-me down sony vaio desktop.
My mother isn't tech savvy and had a few errors with it not wanting to boot up. As sony didn't include the windows XP disk (or even a simple recovery disk) she decided to buy a new system outright. So I inherited it.
I tried installing my main HD from my other PC into it, but it wouldn't recognize it at all unless it was as a slave. I hooked the vaio's HD to my PC and took the essential files that were to be saved from it (music, pictures, etc...) and then formatted it.
Usually I use Linux (because its faster easier more secure and just better) but in the past week I have had to install Windows XP pro sp2 on a seperate hard disk for remote desktop connectivity with the Windows system at work.Installation wouldn't work for whatever reason, so I had to install win2000. I thought I would keep that on, but unfortunatly updates would not work at all. So I then relatively painlessly updated to XP and installed SP2. From there it was working, and everything about it worked (apart from in games I get odd white lines on textures, but thats probably for another thread).
View 2 Replies View RelatedI've found that if I perform a straight cold boot, first of the day, my computers window bar continues to cycle. See my question of 8/20. However, if I press "Del" in the initial stage of bootup and leave my computer in the BIOS setup mode for 2-3 minutes and then exit I am able to boot normally. I suspect that I may have a problem with the motherboard or one of the PCI cards having a bad component.
View 3 Replies View RelatedI had the problem with the infinite reboot cycle. I fixed that by just clearing out my whole hard drive, in other words full restore. But now the problem is, I can't find my LAN in my network connections. The only thing it shows is MSN and I dont use that. I use a router with all wires and I share the internet with me and my dad. Its modem to router to my computer and my dads computer. So i go to device manager and what do you know? I also cant find my network adapter option in it.
View 3 Replies View RelatedI'm trying to recover the data from a SATA drive in a new Dell computer. I have an old computer that has an IDE drive with XP on it. I tried to install that old drive into the other computer and boot off of it and see if it can see the files on the busted SATA drive. It boots up and the XP loading screen flickers very quickly and then the system reboots. If I start it in safe mode, it also reboots while its loading all the drivers. The last driver it shows is "agp440.sys"
View 7 Replies View Relatedi bought this dell demension 4550 used i turn it on it says to hit f12 to reboot i do that and it comes back to the same f12 reboot how do i fix this problem
View 2 Replies View RelatedI have been trying to start my computer for some time now but whenever the computer gets to the desktop screen, a ton of programs start popping up and eventually the computer restarts and the cycle continues until I shut the computer off. I am able to do virtually nothing on the computer before it restarts but I am able to see that the computer is running at 100% and has approx 180 applications running when I open the . I want to do a virus scan but cannot and no matter how many of the programs I try to close, it always restarts. Is there any way that I can stop all programs from processing at the start so it may not restart on me?
View 1 Replies View RelatedMy Computer is stuck in some rebooting cycle. I have XP home edition. Every time I log in it shows my desktop with no icons, sits then logs off. I've tried safe mode with the same result. I've tried booting with my XP cd with same result. I read somewhere that it might be a virus
View 4 Replies View Related