I had Windows 7 installed on my laptop Dell Vostro 860, 2GB RAM, that after 2 months crashed. It gave me a black screen with"bootmgr is compressed press ctrl+alt+del to restart" that could not be fixed fast because I had lent my Win7 to someone who is far from me at the moment.I had the brilliant ideea to install Windows XP (since I had the CD).Everything went well up until the point when, during the installation it told me that it couldn't copy a file from the CD and the option to skip or try again. I skipped it since "try again" didn't do anything. I thought it couldn't do much harm. I got to the blue screen with the green bullets, progress bar and 39 minutes left when I got this error that said that windows can't continue and restarts the comp.
I am having trouble setting up XP on my Windows 2000 SP4 Computer.I know I installed the components into the computer, but it does'nt show up.I have no experience In boot disks or anything else, so please speak slowly.
I dont know why, but lately i have had to reinstall my sound driver each time i restart my computer. After restarting my computer, and i go to "sounds" in control panel, it says "no audio device detected".
I have a problem booting up my other PC, it's been happening quite often, sometimes it boots up but sometimes it just simply doesnt... it gets stuck with a message "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" can anyone tell me what I should do to fix this problem?
i have recently downloaded boot editor and as it did not work the first time i uninstalled it, this was yesterday. Today i turned my pc on and the system speaker beeped and it didnt even show the first loadup screen that says energy at the top.
I want to repair my windows cause I doesn't boot up properly..I hve followed instructions but when I put cd in it takes mr to set up windows n asking mr to select partition..so I select my current system drive n it is asking mr to press c to continue setup using this partition..N then it ask me to format or leave current file system intact..am I doing something wrong, how come I don't have the repair windows xp option like it shows on the user guide?
I had to re-install my Win 2K server. The second partition has Windows XP on it and and XP doesn't boot up after the re-install. The error message I get is it cannot find the SYSTEMd file under the Config folder and it is trying to boot Win 2K instead of XP.
I am using windows xp and just moments ago I get a problem. windows will not boot at all. Nothing unusual at start up but no windows icons/usual windows start up appear and computer sits there fans running. If I try to start in safe mode the computer hangs at system32/config/system along with the usual prerequisites and does nothing after that.Circumstances right before this started.I plugged in an old IDE harddrive(making 2 harddrives plugged in) in order to retrieve some old data. Everything starts up fine but windows freezes 30 sec into startup and the mouse moves but nothing happens(much like my previous registry problems).Restarting leads to the problem stated above.
I have a dell PC with windows XP Media Center installed. I think that a virus damaged the boot sector in fact I cannot start my PC.
All I am able to get to is the BIOS or the diagnostics tool, F8 doesn't work, which means I cannot restart in safe mode or last known good configuration and if I use alt+F11, which is the option you have on Dell PC to reformat it in order to have everything the way it was at the time you bought it, it doesn't work.
A friend of mine told me to boot from the CD and then use the fixboot command, the problem is that DELL does not give OS CDs anymore and I honestly do not know what to do
Trying to fix my friends computer thought I would be done in an hour or so but I ran into a retarded problem when trying to boot from the windows cd. Here is some information I know off the top of my head. If you have any input please let me know, I'm trying to get this done before tonight since its Friday
pc wont boot. its a sata hard disk which is detected upon boot. however i dont even get the windows splash screen. in the bios - the hd doesnt show up. safe mode doesnt work neither does last known good settings. i put the xp disk in and attempted to do an (install followed by a repair ) rather than system console. nothing works because the xp disk claims no hard drive exists. is it cos its serial ata. im not exactly sure if its got raid setup etc although i do possibly remeber a viaraidtool popup that might have come up on the odd times ive been over and used my dads pc to educate him on eBay. :-) anybody got an idea. sorry i dont have specs.
I was messing around with Ubuntu Linux and it installed GRUB on the master boot record and I want it gone. I was told to type 'fdisk /mbr' in MSDOS mode to get rid of GRUB. I dont know how do get into MSDOS mode.. command prompt doesnt work.
I am thinking of buying an "upgrade kit", basically a much better mobo and processor, lots more ram, better sound and video card. It has No hard drive or DVD drives installed, those will come directly from my computer. I have XP installed. my question is, will it: Work great, since XP will detect the new hardware and everything is plug and play now Freeze up and refuse to boot since it doesn't recognise all the major changes
I recently installed a new hard drive into a friends computer and installed XP Home. I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do. I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
After getting my computer back from the repair service I noticed a message "boot.ini invalid." Still the computer boots. The BOOT.INI is not merely invalid - it ain't there. In the attached PDF you can see what I see. How do I get the file back short of reinstalling Windows XP?
Last night I installed service pack 3 for xp home not thinking much of it. It told me that setup had completed successfully and that I had to reboot my machine, and here is what I have on my hands now:When I start the machine, the dell screen first comes up as usual and then XP Home begins to load (the screen where the logo is in the middle and the little bars move from left to right in the middle of the screen)...so far so good. Then, after a few seconds that screen goes away, then comes back for a few seconds, and then continues to a blue screen where the logon screen would normally appear. At this point, the mouse pointer shows up in the middle of the screen, which I can move, and the screen stays completely blue and nothing happens
im not sure if the way round iv done things was stupid or not, I have my machine, with XPPro installed on, bought another H/D and installed vista 64 on it, however i installed vista with the xo drive unplugged, and i cant work out how to get an OS choice on boot
My new hard drive w/windows XP newly installed won't boot as a stand alone without my old windows ME hard drive in the PC. Plus, the XP installation is not working right, it won't allow me to install new software, for one thing, so I just assume go back to using only my windows ME hard drive but I can't get rid of the message at boot up of which operating sytemI want to use,even when I took out the window XP hard drive and restored an older version of my windows ME registry on the other hard drive.
I installed Ubuntu (a popular Linux distribution) a few days ago. I had Windows XP. It was fine but I had very little RAM: 256 MB (-32MB of which is shared with the video card) with which Feisty Fawn (the version 7.04 of Ubuntu is called this - it is the latest) would run really slow. So my friend suggested I use a live CD of GNOME Partition Editor, create the partitions and turn the swap on before I started installing Ubuntu. I created 3 partitions of ext3 format on my 160GB Hard disc for Root, Home and Swap which were 20GB, 10 GB, and 1 GB respectively. I had not yet installed Ubuntu.
I recently reformatted my HD and re-installed XP home. Now when I boot up it asks me which operating system I want: either Windows XP Home or... Windows XP Home. Why is it showing the same OS twice? Can I get rid of one without having to re-format all over again? What might have I done wrong when installing the software?
I have purchased a Windows XP with SP3 OS. After installation of the OS I installed the high priority updates from Windows. Following that the boot up screen would keep cycling without ever logging into Windows. The BSOD error is STOP: C000012a. I have read many forums and I believe the best course of action is to reinstall the OS. It seems there is an error with the Windows updates when being installed on a version of XP which is bundled with SP3 already installed.
Old system AMD athlonk7 1.1ghz used win 2k at the time hasn't worked in 2 years. on board video stopped working.Tried to get it up and running for months took an old Riva TNT PCI video card out of an old system. later replaced the momory, later reformatted Harddrive, installed win xp,...no boot....now with new harddrive loaded with win xp....splash screen then black screen and hourglass and NOTHING...... there's no software installed so it must be a hardware issue. Yet everything works in safe mode. I did have some yellow question marks on some audio driver but I deleted it.
Ok, so this week end I tried adding a new HDD on my XP machine. This HDD had 2 partition on it (from a previous XP install on another PC) so I used the XP install CD to basically remove it and create a single partition on it (that's the only way I knew how to do it).However, while doing that, it ended up creating a dual boot config so that now, when I start my PC, I have to chose which OS to start:1) The regular XP install2) The one that never got installed on the new HDD since I only partitionned it.?
My load times have always been pretty long using XP with my setup and is almost up to a minute or more from power on, but my load light was always working and doing something and I just got use to it. I just installed two small spot fans and as soon as I powered on my boot times have gone from a minute or so now to about 6 minutes. Windows will even load without icons, windows bar, or anything but sits there looking at my desk top background for about 3 minute or so and sits idle. Then after the 3 minutes of idle my load light starts working like crazy and everything comes on.
I've just noticed that after installing AVG Free 8.0 and ZoneAlarm Firewall that my computer's startup time has increased dramatically. Is there anything which you can advise to decrease this again?The startup time before installing these two programs was almost instant. Could it also be down to the low amount of disk space which I have available at the moment (15.5GB of 181GB free)?
Ive only been using Xp for about 6 months now, and so far all had been ok. SP2 installed fine a while back, and I am up to-date with Microsoft auto updates. Yesterday I booted up and the system froze just after running the BIOS checks, it didnt reach as far as the OS system flicking in at all, I just had a black screen. Several reboots later, I decided to boot from the master setup disk which took me to a point where I selected R, for restore to an already installed OS.
I was then asked to type in the Administrator password - this I duly did as its the only one I have installed..... and it kept rejecting it. In the end I rebooted yet again, this time without the cd being the first boot option, and XP loaded as if there had been no problem at all. I've virus checked the system and run registry checks and can find nothing wrong at all.
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
a friend asked me to install a new hard drive for him because his crashed. So i purchased a new hard drive (maxtor 60 gb) set out to partition and format the drive, using a win 98 boot disk. I partitoned the drive ( for large volume drive.) Formatted the drive ( format c: /s ) to include system files.and proceeded with Os install Windows 2000. Everything went as smooth as silk... the when install finished, I was prompted to remove the disk from cd rom and complete installation with the onscreen prompt. I removed disk, clicked finish and the computer rebooted upon loading, when it went to start windows it said DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I put the Win 2K disc back in and hit enter. It started windows perfectly no errors at all... then I took disk out re-started ( to check system stability) and back to the same error message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I of course freaked out, I feel like an idiot cause I cant get this thing to work right. tried reformatting without the sytem files, re-partioning tried win 98, winXP, nothing same stuff! So I talked to a pal got a hard drive wipe program off the net "killdisk", wiped the drive and tried to reinstall Win 2K, same problem.
SATA Drive not recognized as boot drive on XP installation.Need to create an Xp boot sector.I have been working on this for days. Successfully installed once and ended up with corrupted files on the Win98 partition, so want to get it right this time. (Don't remember how I did the "successful" install - after several days of various problems - most of which are now solved - I am a little brain-dead.What I am looking for is a way to create an XP boot on the SATA drive. I assume this means changing the MBR. System: MotherB: Asus A7V600 with VIA Chipset Drives: 0 120gb SATA; 1 15GB IDE; 2 10GB IDE Current Status:Win98 and WinXP both operational but no dual boot. Win98 was installed first. Both systems were a clean install. Both systems installed on FAT32 in seperate partitions on the SATA drive. Computer startup simply goes into Win98, as there is no XP boot sector on the proper drive......
I've been battling it out with a filth ridden computer for days,appear to be almost on top of it. It is completely clean of virii/malware/spyware I just installed SP2 on it, and since then it has been exceptionally slow to boot.Following the initial boot screen, the screen goes blank for over 2 minutes It then gets to the black screen with the grey progress bar along the bottom. It takes at least 5 minutes to get through this progress bar.
Was never able to restart after that. Normal boot shows the windows initial screen, but eventually just restarts, safe mode does the same thing whether it's with network, command line or plain safe mode. Last known good configuration does the same.Needed to use a file so decided to remove the HD and re-install to another PC. I did have access to the file in question but now I'd like to fix the problem. The other system uses AVG. I started a scan and it detected Cekar.d (A0003977.exe, wdfmgr.exe and initially ntldr.exe), Dropper.Inor (ntdetect.hta, A0003979.hta), PSW.Generic5.ABVW (ctfmona.exe), PSW.OnlineGames.AAFI (ctfmonb.exe), PSW.Generic5.AFYK (ctfmond.exe), PSW.OnlineGames.ZWT (LotusHlp.exe) and some others but for whatever reason the scan stopped. I restarted it and now the AV still finds most of the threats it was seeing before but not Cekar.d. in the ntldr.exe file.
