I just installed Win 8 (from my computer's cd/dvd drive). Clean install on a new hard drive. However the file manager shows that I do not have a cd/dvd. I also checked the device manager...it shows no cd/dvd). Apparently this has been a common issue with win 8.
View 2 Replies
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I've tried to download VB6 Enterprise and it prompts me with the compatibility issue.
View 3 Replies View RelatedI installed an OEM version of Windows 8 on a formatted, Active Primary partition on an external HDD. After approx 3 minutes into windows my screen went black. I had to hold down the power button to exit. Trying to boot back into Windows8 from the boot menu, Windows attempted to start with the circle going around, but again a few seconds later, black.
These are some of the solutions I have tried but to no avail:
...Tried a different partition on the same physical external HDD. (Note: previously I had created an additional partition on my computer's C: and installed.) Black.
...Updated Video Drivers
...Checked if the drive was activated (SLMGR.VBS /DLV, then /ATO (Activated)
...Did first, a "Refresh then a Reset (both took me into windows but a short time later, black)
...While Black I tried a Ctrl, Alt, Del attempting to get to the task manager, which did not work, thinking I could try an inline install from the DVD.
...Booted into Windows 8 Safe Mode (F8 from Windows 8 boot option).... this was ok. It kept me in Windows.
When reverting back to Window7, the File System on ALL drive partitions, Computer's C and all externals, had to be checked for consistency before Windows 7 would boot up. Not sure why but once my screen goes black in Windows 8 somehow all my other partitions, Computer and Externals, are compromised.
I wanted to set up dual boot for Windows 8. I created a partition with enough space to load windows 8 from an ISO file.
However, after creating the bew volume, windows 8 displays a message that the partition is dynamically loaded. I have deleted the partition and re-created it with the same result.
I don't remember seeing an option for dynamic creation.
In a previous attempt< I have a partition(Q), which cannot be deleted, don't know if this is a problem.
I purchased a Windows 8 Pro licence through a classified advert on another forum in Sept 2013 and now since Windows XP is no longer supported I decided to update my OS. I thought I got a good deal on the licence and when I went to try download an official Windows 8 file I couldn't. I contacted Microsoft who informed me my licence is a valid Windows 8 Pro VL licence. They were unable to provide me with a physical ISO to download from and told me to ask the person I purchased it from... who of course has since disappeared.
So I downloaded the Windows 8 Pro x64 ISO from MSDN, installed great, product activated perfectly, my old pc is running and booting fast and I actually like it. However when I try to update the scroll bar just constantly scrolls left to right and the progress bar shown at 0%.
I have googled, and deleted the folder called the DOWNLOAD folder in SoftwareDistribution following advice online, however this still does not fix the problem. Occassionally I have got the files to download after the 0% progress says different, and when it comes to install these update files, nothing happens.
Is it because I downloaded a dodgy OS version from MSDN? it is the 915417.iso that I used.
Also can I update to Windows 8.1? When I installed the first few times I tried to update through the Windows Store. it said I require updates. Some files might have updated, I did a "shut down and update" option once and since that the option of installing Windows 8.1 has disappeared.
1. I have currently two hard drives plugged into my computer that I'll name (A) and (B)
2. Before the problem :
(A) was partitioned half into a windows ultimate 64 bit and half into windows 8 Pro 64 bit
(B) was partitioned into one windows 8 Pro 64 bit partition.
3. I am currently running on (B) but it's connected and I can see (A)'s file and interact with some but obviously not those protected.
So what happened is I started experience some disk usage issue so I did :
-I put the paging file size to my ram
-I changed the power settings
-I ran a dskchk (no errors found)
-I removed the file indexing
-I removed the paging file size
Nothing really worked so I thought of unplugging (B) which didn't worked so I thought it might have been the multiple partitions that was causing the problem.
So I went into aomei partition assistant, formatted window 7's partition and merged it with windows 8.
Now when I boot my computer on drive (A) it still me the choice between windows 7 and windows 8
If I choose 7 it gives me a black screen saying something is missing (which is normal since the partition has been formatted)
If I choose 8 it takes a long time to load gets me to the log-in screen where my icon has disappeared but my username remains.
If enter the wrong password it still recognizes it's wrong.
None of the two buttons at the bottom works (ergonomics? and exit)
Login in loads for a while and then either black screens me or leaves it hanging without the loading icon.
Safe mode leads to a black screen
Auto repair doesn't find any errors
And try to refresh my windows 8 tells me to go into the actual drive of the OS which I do believe I'm on.I'd like to keep as many files as possible and I didn't even want to refresh for a while because I was afraid of losing my applications.
I have a new laptop Dell with Windows 8 on it. I can't read the CD with the setup.exe and all program of a printer:
All in one Lexmark X75
I took something from Internet, but is not valuable for my computer. It seems that is installed but in reality is not installed, nothing appear to could print with my printer. I know that my printer is old model, but is very good on a computer with Windows XP SP3. What to do to find a possibility to install and use the printer on this program Windows 8, because I know that it contains also OS and Windows 32. Must exist a driver for it, or the driver for Windows 7 could be good for Windows 8 also?
I cannot install java on my computer.I download the application on their website, tried many times to install it but without success.
I tried the offline version, close all my tabs, stop firewall, antivirus....not working. I tried with administrator, same.
I want to install windows 8 on my 4GB RAM laptop. I use it mostly for browsing the internet,watching movies and some small programs. Should i install the 32bit. version? I must say that i don't plan to upgrade RAM memory in the future,4GB are more than enough for me right now
View 9 Replies View Relatedi've been told that windows 8 only comes in upgrade version (NO FULL VERSION). my PC didnt come with a windows 7 disc it is preloaded on the computer. i want to know if i use DBAN will it also get rip of the preloaded windows 7 firmware and if so is it possible to install windows 8 without having to load 7 first.
View 10 Replies View RelatedRecently I bought a new hard drive to replace my old one because it failed and just stopped working, I have a Sony vaio laptop that was pre- installed with windows 8 and assuming the activation key is in bios because I have only a windows 8 sticker at the back. With that out of the way the real issue is how i install windows 8 without a disk since I never got one with the laptop when I bought it. I got a spare computer I can use to create a disk or a Installing through an USB, but at this moment I don't have any empty disk available I heard its possible through USB so am planning on using this method. So how would I create an USB that I can use to install windows 8. Lastly, if I did make a USB would i have to enter an activation code or will the one in the bios work.
View 5 Replies View RelatedWhat happened to Msn Messenger? i can find it anywhere and can't install it on Win8 Pro!
View 9 Replies View RelatedWith windows 7, we were able to use windows loader during the install the pre-activate the OS and if it was a OEM based pc it could be setup to use all the logos etc etc, I was wondering if there is something like that for windows 8? or at least activate it during the install without having to manually do it with microsoft toolkit?
View 9 Replies View RelatedI'm installed Windows 8 on my desktop. The Windows 8 Upgrade Assistant indicates that this software will install OK. It was NOT flagged as a problem.
However, when I went to install it, there were warnings that it wasn't supported and when I try it, I get errors about the registry.
How to use VB.NET, I don't understand it, and I'm used to VB 6.0. Is there a way to use VB 6 in Windows 8?
I can't seem to install my HP Printer,
It says that the computer can't find the c:windowssystem3hpzprl40.exe
I've check the windows installer and it's not set as automatic, and I can't change it, the options are disable.
My laptop originally had Windows 8 installed on it on an SSD and an HDD. I have since wiped the drive clean. But now, I need to get Windows 8 back for work. How can I replicate the original layout with Windows 8 being put on both a SSD and a HDD. The nature of my work involves a lot of CAD software usage for projects as well as research and the like. As such, I would like for such software to be located on my SSD for faster speeds.
View 9 Replies View RelatedI want to get started with WP8/8.1 dev and I decided to dual boot on my work laptop (Mac Book).
The problem is I don't want to use my Dreamspark (OEM as far as I know) license on my work PC since it's an academic license if I'm not mistaking and this might cause some problems at work, and I also don't want to activate it on my 6 years old PC since I have some projects still going on and I'm planning on upgrading sometime next year.
So my question(s) is simple: Can I install the 90 days trial of Windows 8.1 Enterprise and reinstall again, on same PC after the trial is over?
Brand new hp laptop came with windows 7 installed but also windows 8 disc. I upgraded to windows 8 and then to 8.1. No problems. I then tried to install Office Home & Business 2013, The following then happens----
1. I enter product code no problem
2. I select country united kingdom, no problem
3. Option to verify language is greyed out so i proceed to 4 below
4. The continue button is green, i go to click on this and as soon as the mouse hovers over it
The button changes to grey before i click on it.when i do click on the continue button it still stays grey and nothing happens. Move mouse away button goes back to grey.
I've tried six times but always the same result.
I've got an older SSD 120 GB. I was wondering if by partitioning it I could create a BOOTABLE Windows install disk. I've no problem with USB STICKS but using a bootable reserve SSD would be great IMO as I could then also have all my various other programs on it like Ms OFFICE and PHOTOSHOP so re-installing Windows together with the applications should be a breeze.
Perhaps the Bootable USB STICK procedure could be used as on boot the computer thinks it's a Disk anyway ( says USB 2.0 LEXAR HDD) for the USB STICK.
Note I'm not talking here about RUNNING Windows from an external HDD -- that can be done easily enough with Windows Enterprise (Windows to GO) but simply creating a Windows install media that will boot off an external SSD (NOT a USB STICK). I have the ISO's.
I was reading online that Windows 8 will just reinitialize itself if you make any significant hardware changes. Kind of like what it did during the first install/boot.
So because of this I had not backed anything up (it's all replaceable I just would really rather not set everything up again).
The message I'm getting at startup is "Reboot and select proper boot device or insert boot media in selected boot device and press a key"
Windows 8 is installed on my Vertex2 SSD which is being recognized by the bios along with my other drives. I ensured that the SSD was selected as first boot device which it was and disabled the other ones for giggles. Still nothing.
Why won't it boot? I didn't change anything other than the motherboard
Specs :
Windows 8.1 x64
Intel X58-based Alienware Aurora mobo
12GB DDR3 ram
Intel i7 920
I've been trying to troubleshoot an issue with my fan speed running at max speed from boot to Windows 8.1 desktop loading. This happened after installing Alienware Command Control which, unbeknownst to me, was not compatible with Windows 8.1 x64 and has, I think, loaded an incompatible (with Windows 8.1 x64) firmware version to my MIO board.
To try to remedy this I have:
Uninstalled that software.
Performed a power drain to see if that would reset the MIO board (which controls fan speeds).
Tried restoring a previous disk image.
Tried installing a fresh copy of Windows 8.1 - this step went wrong for some reason and didn't complete.
Tried a CMOS reset.
None of this has worked and now I'm stuck in a loop I can't get out of.
If I try to boot from the drive I fresh installed Windows 8.1 on, I get BSOD "whea_uncorrectable_error".
If I try not boot from a Windows 8.1 install disc or my Macrium Reflect repair disc, I get BSOD "Machine Check Exception".
I've tried a CMOS reset a couple more times, made sure the time is correct and have loaded optimal defaults.
I'm at a loss what to try next. Prior to the BSOD's, I'd decided to gamble on it being a MIO board problem and ordered a new one from eBay.
If I can't install Windows then the new board is useless. I don't believe the MIO board is causing the BSOD's - it booted fine (albeit loudly) after restoring to a previous disc image of Windows.
win 8 won't let me no matter what I try to do to remove folders from the Windows 8 install. Old install folder. I can't remove the regedit file from it. I think I have to boot Linux and mount a drive to do what I need.
What can I do to fix this besides linux. Format and go back to windows 7?
I have 2 versions, an .exe and an .iso.
Look at (Brink), to see which way to install the Windows Insider Program on a 8.1 PC?
I try to install Windows 8 on my existing Windows 7 installation. I want to install windows 8 on vm ware player for testing and how it works for me. So i tried to install on vmware player but I receive error some thing like 64-bit machine is need to install.
My PC is 64 bit machine and the Windows 7 as well.
I just installed Windows 8 Pro on my HP Pavillion with an AMD A8-3500M APU with Radeon HD Graphics, CPU 1.5GHz, 8G Ram, 64bit operating sys, I have a Toshiba Ext HDD only about 2 months old 1.5TB that worked just fine with Windows 7 Home Premium. but since I have installed Win 8 Pro my Device mgr sees it, but it doesn't show up in my list of drives on my file page. Also my Logitech unifying receiver is not recognized and I updated to the Win 8 driver.
View 6 Replies View Relatedis it possible to install a full Windows 8 OS on a smartphone with Intel Atom Z2420 or other Intel CPUs?(No Windows Phone or RT)
View 7 Replies View RelatedOn Windows 8 you can't install some very popular Chrome extensions:
Screen Capture
Awesome Screenshot
Click&Clean
and many other, because Google and M$
have blocked all plugins!
You can't view flash videos or use java on all web sites, but only on several webpages "approved" by M$.
[URL]
I own an Acer laptop that is runing Windows 7. I love Windows 7 and finally made the move from Windows XP but I really like Windows 8. Yet I'm nowhere near ready to make it my only OS. I know one possible option is a dual boot system. If I need to go that route I may be posting again in the future to find out how I can make a dual boot Windows 7/Windows 8 system. Yet I like trying different OS's and already have two USB sticks that are ChromeOS and Ubuntu Linux. I purchase 4GB flash drives and buy the fast drives.
The question is is it possible to install and then boot from a Windows 8 USB Flash Drive? If so, how would I go about doing this? Also, what is the minimum size USB Flash Drive that could be used? I want at least some room to work with and install apps but it won't be my primary OS. If it's not possible to do this how would I go about making a dual boot system? Already I have a 500GB HD with Windows 7 installed but I believe I'd have to repartition and hope to avoid having to reinstall Windows 7 since I have so many installed apps.
Games for Windows Live won't install in 8.1 x64, nor will .net framework 3.5, even though I enabled it. I thus lost DiRT 3, Microsoft Flight, Batman:Arkham Asylum and Batman:Arkham City. Yesterday I got the following games through Humble Bundle: Batman:Arkham Asylum GOTY, Batman:Arkham City GOTY, F.E.A.R. 2 Project Origin, F.E.A.R. 3, The Lord In The Rings: War In The North and Scribblenauts Unlimited. They are all through Steam. Will they all work in Windows 8.1 Pro x64 ?
View 4 Replies View RelatedWin 8.1 trying to install dragon naturally speaking pro 12
Installation fails : "MSXML 4.0 SP2 failed to Install"...
