With windows 7, we were able to use windows loader during the install the pre-activate the OS and if it was a OEM based pc it could be setup to use all the logos etc etc, I was wondering if there is something like that for windows 8? or at least activate it during the install without having to manually do it with microsoft toolkit?
View 9 Replies
My store manager says it can't be done, but I feel there's a way...the problem is of course 8.1 requires different product keys than 8.0 -- where upgrading to 8.1 also changes the product key -- so 8.0 install media won't take 8.1 keys and visa-versa. So when you only have an 8.0 key, you have to first install 8.0 and then upgrade to 8.1; this is a bit weird because 8.1 is essentially a service pack; first "8.1", then "Update 1", what's next for the rebranding of service packs? I can only fathom they did this to cement their new "rapid release" cycle for consumer editions of Windows.
Note: "Easily activate" means not having to call Microsoft to fix the activation.
I bought a new laptop with Windows 8 pre-installed (and immediately updated it to 8.1).
I decided after a week to buy an SSD and installed Windows 8.
I now find there is no product key to be found, and can't seem to activate Windows.
1. I've tried a few things. I tried to enable UEFI in PC Settings, but the setting isn't there (does this mean my laptop doesn't support UEFI?)
2. I entered my BIOS. CWM was enabled, and pwe enable. But SECURE BOOT disabled. So I enabled SECURE BOOT, but regardless of what options I select, the laptop keeps booting into the [Legacy] BIOS, possible because there are no BOOT OPTION PRIORITIES found any longer?
My problem is activating windows, and if UEFI is an option, enabling it.
I tried using this method:
-After installation disconect from internet
-change in registry: HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Setup/OOBE -> Change "MediaBootInstall" from "1" to "0"
-type "slmgr /rearm" into a command prompt, waited for confirmation, restart
-after restart, connect to internet, activate
This works fine until rebooting and then asks for activation again.
I have tried three more times without reinstalling and the MediaBootInstall stays at 0 so it doesn't need changing. I type the slmgr /rearm and on reboot when I go to activation menu it says activated, but when I reboot agian it says needs activation.
Not sure what's going on. I thought it was a windows update at first messing with it, but it still does it even without any updates being installed.
when i try to install or activate net framework from the control panel i get the following error
the feature could not be installed net framework windows cant connect to internet to download the necessary files
i've ran sfc /scannow &Dism /Online /Cleanup-Image /RestoreHealth & they both come back clean
Is it possible to activate WMC version of Windows 8.1 Pro only if you have a legit Windows 8 Pro WMC key from Microsoft? If no, then where are you getting the keys from?
View 1 Replies View RelatedOk, so here's what I keep running into.......I turn off UAC, and within a few hours I start getting a notification that I need to activate Windows 8. It's a legit install, and this only happens when I turn off the UAC.
If I turn UAC back on, then the activation is not a problem and all is good. However, if I try to re-activate with the UAC off, it runs into an error.
For the past week or so, I am suddenly (in the middle of working on something) getting a blue screen that says "Activate Windows. Go to PC Settings to activate Windows." And there's a PC settings button to click. The only way out of that screen is to click there. So I do, and it briefly looks like I'm going to go to some sort of settings screen, but then it disappears and it takes me to my start screen. When I go back to my desktop, whatever I was working on is right where I left it. Happens several times a day.
Why this is happening and why it never actually takes me to PC Settings and what I can do to stop this?
I'm running 8.1 - I "upgraded" (I use that term loosely!) when it first became available back in October.
I did a fresh reboot of my system and now I cannot reactivate it. My product ID is "not available" and I have an activation error description. I've tried all the slui commands and the sfc scans.
View 3 Replies View Relatedtwo weeks ago I had a hard drive failure on the stated laptop. I installed an OCZ ssd and reinstalled windows 7 from a retail family pack. I used the Certificate of Authenticity (COA) windows key from the sticker on the HP laptop. This activated no problem. I purchased this laptop new at SAMS club.
I also upgraded two desktop computers to windows 8 that also had this family pack copy of windows 7 installed on them (about a year ago). Both of these computers activated with no problem. I also installed a separate windows media player upgrade on each computer.
I then upgraded the laptop to windows 8. I also upgraded it to windows media player.
I noticed that the key provided during the upgrade was the same provided by Microsoft during the upgrade of one of the desktop computers.
The validation was successful at first.A day later I got a message stating that windows was not genuine. I then attempted to purchase another key and Microsoft stated that I could not purchase a key in my current country or region (I am in Wisconsin).
The website stated that I had to validate windows by purchasing a validation pack at a local retailer.
Why cant I validate windows? I have the COA still attached and nothing is different about the computer except the replaced hard drive.
I currently have an issue with activating Windows 8.1. I bought a Samsung series 7 chronos NP780 last November that came with Windows 8 installed already. I upgraded to 8.1 a few days ago and left it overnight to complete. Everything went fine up until I had to activate it. It says that the product key is incorrect and to enter a different one. I have looked at the box that the laptop came in, the manuals in it and on the laptop itself and there is no product key to be found. One or two of the manuals/booklets might be missing but I'm fairly sure that the product key is within the BIOS so should it not recognise the product key itself automatically and complete the upgrade without asking me for the key? I ran belarc to can by laptop and at the section where the product key should be it says "Key: None activated". I also ran keyfinder and the key it gave me back didnt work (although the end of it seems to match the end of the one that is listed as the "current product key".
View 9 Replies View Relatedjust got windows 8 pro installed and using toolkit 2.4.1 just to check if I use the EZ-Activator will I need to use that every 180 days or does it do it its self? is that the best way to activate windows pro and office 2013?
View 9 Replies View RelatedToday I updated my Windows pro 8 PC to 8.1. Now it shows activate the license. When I'm running "Windows Vista - 7 - 8 - 8.1 KMS Activator Ultimate 2014 v1.8" tool, it shows following error.
.net_framework.pngWin license issue.png
This too display it successfully activated the Windows, but "System properties" windows shows it's not activated. Previously I used Windows loader to activate the Windows 8 pro.
I have Windows 8 pro 9600.
.NET Framework error log:- .net_framework.txt
I know you can activate a clean install of win 8.1 with a win 8 product key but you see, I don't have one - I only have the WMC upgrade key that got installed over it when the previous owner of my PC added the Windows Media Center feature (which I read was free once upon a time). You see I have a retail Windows 8.1_RTM_x86.iso disk image and I want to be able to do a clean install.
View 9 Replies View Relatedhow to retrace my steps to manually reactivate. I have gone to Windows 8 forum (Windows Defender - Turn On or Off in Windows 8) & followed the steps...but Windows Defender is not appearing in my action center...when I go here it shows my antivirus & everything on. There's no option to expand the "security" settings to locate windows defender.
Everything else I do turns up a notification that the app is "off"; but it doesn't give me an option for turning it on. Once again I'm lost in the dust of Windows 8 & it's embedded features...where I locate windows defender to turn it back on...otherwise I'll go the simpler route & just leave things "as is" & download iobit malware fighter or something. However, I've found that I have sporadic issues with Iobit Malware fighter where it works for awhile & then for some reason after a time it won't launch.
I find I'm rather routinely having to uninstall & re-install it. Is it a compatibility glitch with Windows 8.1? Cause Iobit website insists that their malware fighter coincides with all versions of Windows 8. Or should I even be concerned about the malware fighter...I have super antispyware...but it's not a program that is automatically active. My windows security center seems to be compensating with AVG antivirus in place of a malware program. I wasn't aware there was any anti-malware or spyware embedded in AVG?
I got my Windows 8.1 Pro cd, and when I try to activate, it would not activate ! It says my code is blocked beacuse it is not a legit product code.
View 2 Replies View RelatedYesterday did a clean reinstall of Windows because my computer was acting weird. It installed no problem but after a few hours of reinstalling programs I noticed that Windows wasn't activated, so I went to PC Settings and clicked "Activate Windows," but as soon as I clicked it the page closed. I tried again, reset the computer, tried again, but the same thing happens. I've also been getting a few BSODs which I'll make a separate post about, but how to fix the activation error?
View 1 Replies View RelatedInstalled windows 8.0 pro on oracle VM VirtualBox (running 8.1 pro on host machine) and it asks me to activate windows.
Okay, but it doesn't accept the product key I purchased for the host machine. What to do?
Can a Windows 8.1 Single Language key be used to activate a Windows 8.1 Core?
View 2 Replies View RelatedI get that error message when i try to activate windows.My product key is already entered and on the screen, and this keeps on coming up.
View 7 Replies View RelatedCan i activate Windows Demo Mode for Windows 8?
On Windows Demo Mode can i fnd a app with name Windows Demo Loop and more...
ReFS Activator_1.jpg
The program allows you to activate the ReFS (Resilient File System) in Windows 8. Supported versions of Windows 8 are RTM (build 9200), Release Preview (build 8400), Consumer Preview (build 8250), both 32- and 64-bits.
You are using this software at your own risk, we do not take responsibility for any damages to your system, but we do not believe it can harm anyone anyway. If you want to be able to remove the ReFS, before its activation, create a restore point.
Download: FirstEver.eu
How to activate Media Center in Windows 8.1 Single Language RTM Edition?
View 2 Replies View RelatedRecently I have installed a clean copy of windows 8.1 pro version in my system. Now I want to get 8.1 with WMC and want to activate that....how to do so. I have tried activating windows with skype but result was failed
I follow this thread to activate [URL] ......
Any method to remove "Activate Windows" and "Build Number" watermarks from 8.1 Ent. ?
View 9 Replies View Relatedi just install win 8.1 build 9471 but i can not activate it with any tools
View 9 Replies View RelatedIs there any way to activate Volume License without KMS Server or KMS activator ? with MAK key ? And if yes, where to find mak key?
View 8 Replies View RelatedAbout this topic [URL]...
What I need to know is that: Is that possible to integrate a loader onto Windows 8 boot loader to reset the activation to trial period and then activate the system with an offline key (activate as offline only)?
This way we could make somekind of loader to set activation status as OK as far as online is not intented. And we can continue to have an trial adventure for life with Windows 8. Is that possible or no one tried it yet?
One more question, does the dev who made that topic has the tool for his method so we can try it on any win8 machine? If so, download link?
Can a genuine Windows8 key activate both 32 and 64 bit, depending on what you choose?
View 9 Replies View RelatedI have Windows 8.1 activated by phone. I wrote down my key, first part of numbers which is my ID and Confirmation ID which I got from phone bot Will I be able to use this information to activate Windows 8.1 Update 2014?
View 4 Replies View RelatedI have been looking all over i even tried phone activation with 100 different product keys and every time i cal that number 855 469 ..... and i put in the installation id number it tells we cannot complete this transaction because "Microsoft" has no "Record of this being a valid Product" and it tells me to verify that i have a valid product.....
View 9 Replies View Related
