I am trying to access the boot menu or Setup on a Gateway NE56R31u laptop. Searches have said it could be accessed by pressing Esc or F10 at the Gateway boot screen, but I've been unable to make that happen. I've done this hundreds of times on other computers, so I know the technique and the timing that has worked in the past. I've also tried Del key, Fn + F10, F8. How to make this happen?
View 6 Repliesi'm using a Gateway Windows 8 64 Bit.
I know how to access the boot menu using the advanced troubleshooting option inside the computer. But, what if Windows 8 becomes unbootable and I cannot log into the machine? There is no boot menu option like Windows 7.
I have heard if Windows will not boot, it will display the advanced options automatically. Is this true?
Also, if I power down my system while it is booting up will I be able to access the boot menu on next startup?
My Acer Extensa 5620Z originally came with Vista, then I clean installed Win 7, now upgraded to Win 8. Since the latest upgrade, I am unable to access BIOS or the boot menu. The black and white boot screen used to say to press F12 for boot menu, and something else for Setup, those messages are no longer there. And those key combinations do not work. I've also tried some other combinations I've found in searches - F2, Alt-F10, ctrl F10, alt ctrl F10, F8, del, esc. None work.
Could the upgrade has modified the firmware somehow? Boot screen says Phoenix bios, TrustedCore v1.32 - I think that is the same it has been.
Ok so i have 2 months lenovo ideapad z580 laptop..i am unable to access UEFI BIOS menu and boot menu anymore these were the steps i tried with my laptop.
1) I have windows 8.1 tried going to pc settings and selected uefi settings on restart But the problem still persist the laptop is just doing normal windows 8 boot
2) Tried pressing/hitting F1,F2,F12,DEL keys
3) I have also used lenovo one key recovery button there it showed "bios setup" when i selected it and hit enter it is just doing normal windows 8 boot still i can't access uefi bios
4) Tried updating BIOS for the laptop but unfortunately there was no bios update for this model
5) Tried resetting Laptop by removing battery and ac adapter and pressing and holding power button for 30 seconds but still no use i can't access BIOS yet
6) I tried removing the internal hard drive Out of the laptop and this time one starnage thing happened " before with internal hard drive i used to get lenovo splash screen when turning ON but after removing hard drive and when i try to access bios i can't see the lenovo splash screen at all" still i can't access BIOS!!!
7) I even have tried holding down Shift key, letter B when starting up the laptop but still didn't work seems like windows 8.1 makes changes to BIOS?
I am trying to Boot to Boot Menu so I can select CD rom so i can Ghost image my wife win 8 laptop, the problem is Win 8 wont let me access the boot menu and i am not sure what to do. The brand new Laptop came with HHD and i want to capture the image via Ghost and then put the Ghost image in SSD ...
Laptop is : Lenovo G505
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
View 3 Replies View RelatedI am trying to recover the old F8 menu which I can access the safe mode
I can't see the startup setting in the advanced option menu
Toshiba Satellite C55
I have a notebook with win 8 and when I click on camera I see a gallery of my photos and videos but I don't see how can I take more photos.
I took some photos, and made some videos, now I'm stuck in this "gallery"
When a menu appear is like: "crop ------ delete"
How can I come back to the default menu?
I turned my laptop right off last night (I usually just put it into sleep mode) and now, since rebooting this morning, I can't get the menu to slide in from the right hand side. Instead, the Power and Search icons are showing at the top of the start screen along side my name and avatar.
I've recently had to have a new hard drive but the menu has been working OK until now.
Is there a setting somewhere that I need to change to get this back?
I have been using Windows 7 Pro (64) for several years, and today installed a newly purchased Windows 8 Pro (64) OS. I looked on-line and found many articles on how to multi-boot back to Windows 7 after installing Windows 8, and believe I have done this correctly (more below), but when booting up I do not ever see a multi-boot menu, my system boots directly into Windows 8.
When installing Win 8, I booted from my CD/DVD drive with the Win 8 OS media in the drive. (I had previously reduced the volume of my Windows 7 drive and created a new partition that I called "Windows8". ). At the appropriate time in the Win 8 install I chose "Custom", then chose the newly created "Windows 8" partition, then proceeded with the Win 8 OS install. As mentioned above, I do not see the multi-boot menu when booting up, however when in Windows 8 I can see the Windows 7 drive in "Computer", so it was not over-written.
Startup Options - Choose a Default OS to Run at Startup in Windows 8
and am wondering if I should try Options 2 through 4 (1 of)? I build my own PCs so know something about PC's, bt not much about booting to an OS.....
Another options might be installing a third party boot manager, which I have not yet done.
my reason for getting back to Win 7 is to be able to use the PC while I learn and setup Win 8 over time. I went into this believing that getting a multi-boot capability would be very easy.
I've been getting a "File Access Denied, You'll need to provide administrator permission to rename this file", popup window even with UAC turned off?
The files in question are shortcuts in the C:ProgramDataMicrosoftWindowsStart MenuPrograms.
It also happens in C:UsersUser-NameAppDataRoamingMicrosoftWindowsStart MenuPrograms.
Basically what I'm doing is renaming the title of the tiles/programs displayed on the Metro Start screen. If there is a better way I'm all for that as having to click continue every time is getting old.
My pc shut off today all of a sudden, it was running normally, and next time power on windows would not start up normally. the power turn on as normal, windows 8 blue logo show up with circle running for 3 seconds, then screen would show a sign losing signal from monitor, then screen would turn dark, nothing going on, power still on, no beep, no sound or anything.
I am running windows 8 retail with license bought from Microsoft on ssd, and windows 8.1 enterprise rtm on a separate drive. Normally there are 2 items on blue boot menu.
I managed to log into safe mode, everything is still there, icons and files, installed software. I checked boot record and there are still same as before.
When dual/multi booting with previous versions of Windows, you have your basic black screen w/white text and when choosing your OS to boot to, you have to use the up/down arrows and hit enter.
With the visually nice boot menu screen of Windows 8, you can actually use your mouse to choose your OS, just click the OS you want. Saves a few seconds by not using the keyboard.
I made two install of win 8 : one is enterprise , the second is pro with the free mc key and one of kubuntu that are well working . i used a drive with every os , with the others not connected to prevent errors and be more easy to select the one i want to boot .
By now I would like to clean my efi boot partitions because after testing ubuntu and removing it for kubuntu , I have two entry for them while one is no longer valid . I also would like to select between the two win8 without having to get in the bios . One thing that is weird with ebcd, it does not see my two windows 8, may be because they use the same loader name or file .
At last, how to turn win8 vga menu selector to the text one used by win7 . i ll be glad .
Here is a 4 x 1440 x 900 : [URL] ....
I brought my Toshiba laptop over to a friends house last night. We did some gaming, and everything was fine and acting normal. This morning, I packed up and when I got home, started up my laptop. A black screen with a window popped up with boot menu and app menu on it. Under the Boot Menu, there is Windows Boot Manager, and SATA:: TSSTcorp CDDVDW SU-B08AB. Under App Menu, There is Setup. The only thing I can enter is Setup, and there is a lot of things I don't understand.
View 6 Replies View RelatedMy Toshiba Windows 8 is stuck on the Boot Menu and I don't know how to get pass it.
View 5 Replies View RelatedSo I am here trying to downgrade my Windows 8 laptop to Windows 7. (It is an ASUS X55U by the way)
Every time I go to advanced startup settings it doesn't show the troubleshoot option, only the Continue and Turn Off Your PC options. I've tried everything and the option won't appear.
I've dual boot with Windows 7 and 8.1. It worked fine. Recently I've repaired Windows 8.1 boot problem with Win 8.1 DVD. Now Windows 8.1 directly opens without dual boot menu. But when I restart, the boot menu comes and works fine.
View 9 Replies View Relatedmy OS is Windows 8.1 64-bit. It boots just fine, but I suddenly found out that something wrong happened with my BCD store. Tried more workarounds but none worked. The last I found How To Restore Windows 8 Boot Options Menu ended on bcdedit error mentioned below. The problem indicates with following signs:
- bcdedit /enum prints error "The boot configuration data store could not be opened."
- bcdboot C:windows prints error "BFSVC Error: BcdOpenSystemStore failed with unexpected error code, Status
= [c000015c]"
- msconfig's boot tab shows empty OSes list (nothing on the tab is clickablle)
- the same with System Properties, Advanced tab, Startup and Restore dialog (OS dropdown has no entries)
- Trying to enter diagnostic boot by Shft + Restart doesnot seem to offer full recovery menu. It boots to GUI boot menu offering Continue or Troubleshooting, Troubleshooting submenu offers Manage UEFI options (this brings me to BIOS setup after reboot) and Shut down. No manage boot options, no other choices.
All of this point me to that my booting configuration is somehow ill (I wonder a bit that Windows still can start).
My Lenovo G580 laptop won't start up. When I turn it on using the power button it goes straight to boot menu/app menu. There are various options there to choose from, but whichever one I choose, it keeps going back to boot menu. I've tried using the novo button, but it still doesn't work. Whatever I choose from the novo button screen, except "BIOS setup", keeps taking me back to the boot menu. My laptop won't start up.
View 9 Replies View RelatedMy wife has a new Asus X750j Laptop.
I've spent the last day and a half setting it up.Now I want to make a system image of the C: drive using Paragon.
I do this from a bootable DVD, but it isn't set to boot to the DVD first in the boot order.
I've tried tapping the F11, F8, Del, Esc and F2 keys and it just boots into Windows 8.
My computer which has an ASUS motherboard, shows a message when I boot, saying select "Delete" to boot into the UEFI Bios.
But I can't seem to get either a boot menu of the bios option on the laptop.
I have an older Dell laptop with no secure boot that has Windows 8.1. I shrank the partition and installed Linux for a dual boot setup. Normally I install the GRUB2 to the root of the Linux partition so I don't "see" the Linux installation at all until I use easybcd to create a boot menu item. Easybcd wipes out the pretty blue GUI boot screen and you end up with the black and white "legacy" menu. This was all expected.
Now the weird part. Sometimes when I boot the computer I get the black and white boot screen and sometimes I get the modern GUI boot screen. I prefer the black and white boot screen because the modern boot screen does a second reboot when you select a linux installation.
I have a desktop PC Acer XC600, the hard disk is formatted in the UEFI-Scheme. Now I want to do a clean install of a fresh Windows 8, but I cannot manage to boot into UEFI-mode, neither from DVD or USB.
I can reach a boot menu by pressing F12, but there is nothing like shown in the article about installing Windows 8 in UEFI mode. Only standard bios devices show up. There are simply no UEFI devices. I tried different usb sticks, dvds, formatted them different ways, but the best I can get is the point where setup says "cannot install because the disk is formatted GPT".
But the acutal system is definitely running in UEFI mode (?)
I partitioned my hard drive and installed a second copy of my Windows 8.1
I like to experiment with registry settings, tweaks, etc so I use the second installation as a guiney pig, leaving my primary copy untouched.
My question is how to I get the second copy listed on the graphical Boot Options Menu? Right now, I have to press [ESC] on reboot to select it in BIOS settings.
Is there any FREE software like start8 that provides classic shell menu but with "boot to desktop" option?
View 9 Replies View RelatedI recently upgraded my W7 Home premium to a genuine copy of 8 Pro that I got through school and now every time it boots, note pad opens up and has a smaller window saying "Access denied." I don't see anything funny looking in the start up section of task manager and everything in 7 seemed to be good and virus free before the upgrade.
View 5 Replies View RelatedI've recently purchased a new laptop with Windows 8.1 pre-installed. First question is how do i enable a confirm window to pop up when deleting something? I don't like how i can just hit delete and it moves it (Only to the recycle bin, but i'd rather it didn't).
Secondly how do i stop the start menu from switching to that Windows 8 menu view? I did originally change it so that when you click the start menu (Bottom left in) it would actually bring up the start menu, but it seems to have reverted. On top of this how do i change it so that pressing the Windows button brings up the start menu rather than the Windows 8 menu view thing?
Thirdly how do i enable file details when in Windows Explorer. So in Windows 7 when you select a file it would give the size, name, author, date last edited etc in the details pane. How do i get that now?
Finally, how do i change my task bars transparency?
When you launch skype from the startmenu it is a huge square, when i launch task manager from the startmenu it is launched to the desktop.
Could there be a way to make the task menu launch from the startmenu to be a big square like skype is "phone eddition"
This would be useful because when im in games and the game freezes, i can bring up the start menu like SUPER FAST and it is visible but when i launch the task manager it is behind the game no matter what, so im always pressing the key stroke of the first letter of the game and pressing delete to see if i closed the game or not.
I actually have no problem with the Win 8.1 Start menu, but the colors of the regular desktop environment are killing me. Namely, the weird, off-off white of the menus. The High-Contrast White option under Personalization gives me the right color for the menu backgrounds but everything else about the theme screams windows 3.1, so I'd rather not resort to using that.
Is there maybe a registry tweak that I can use to change this one little color? I've tried a few things but nothing so far has worked.
See attached pic to see what I'm talking about.
Im referring to this bottom menu; when I right click my app/programs, nothing pops up below. I also cant rearrange tiles, groups and stuff.
View 5 Replies View Related Windows network and sharing center says that no Internet access but Internet is working (sort of conditionally ) This is a desktop computer with LAN Connection . only one adapter is shown in network devices. Currently we are in domain environment and behind Microsoft tmg.
When proxy settings are set to auto detect then browsing is not working on internet explorer 10 but it's working flawlessly in Chrome. however manually entering the proxy settings browsing is Internet Explorer works.
I tried browsing by ip address in internet Explorer but no luck. It's only on this one pc.
Windows is updated regularly. Scep 2012 is installed with latest definition and found no issue.
I have tried twice to Reset the windsock and tcp ip stack. Still same result. Uninstalled network card drivers still no luck.
Ip is assigned by DHCP. I manually entered ip settings no luck.
Scan with malware bytes anti malware found three malwares and quarantined but still no luck.
Network cable is tested ok.
Reset internet explorer settings and restart pc but still no luck.
Removed Internet Explorer and restart computer and then installed again and restart and still no luck.
Also tried disabling ipv6 no luck.
Internet Explorer 10 is needed as we have some custom applications that won't work with ie 11.
However when I login with another account (another domain user account) all is ok i.e. browsing in IE with auto detect proxy settings is working and also the network icon is not showing no Internet access.