File Access Denied Popup When Renaming Shortcuts For Metro Start Menu
Jun 8, 2012
I've been getting a "File Access Denied, You'll need to provide administrator permission to rename this file", popup window even with UAC turned off?
The files in question are shortcuts in the C:ProgramDataMicrosoftWindowsStart MenuPrograms.
It also happens in C:UsersUser-NameAppDataRoamingMicrosoftWindowsStart MenuPrograms.
Basically what I'm doing is renaming the title of the tiles/programs displayed on the Metro Start screen. If there is a better way I'm all for that as having to click continue every time is getting old.
The start button at the lower left corner of my desktop now turns blue when I hover the mouse over it, and, more importantly, when I right click on it the popup menu no longer appears
I've installed some software that runs on the Desktop. On Windows earlier than 8, it installs some shortcuts in its part of the start menu that run various configuration programs. When you want to reconfigure the software you click the start menu, find the entry/folder for the software then click the shortcut for the required configuration program.
But these shortcuts do not actually run an exe file. Looking at their properties, their targets are actually of the form (for example):
I just bought a new Dell with Windows 8, and after installing Office 2010, I inadvertently deleted the Office program shortcuts from the Start Menu as I was placing them on the Desktop. They're also gone from the All apps menu. how to put them back?
So I use a program called crashplan to back up all my data, but the program began crashing whenever I open it. I would open it, the program would bgin running for a few seconds to a minute then just go away, close with no message.
SO I emailed crashplan and they told me to do this:
It appears that the CrashPlan backup engine is running out of memory. Please follow the instructions below to allocate more memory to the CrashPlan backup engine. Running Notepad or any other text-editor as an Admin, edit the CrashPlan engine's CrashPlanService.ini file to allow it to use more java memory:
1- Stop the backup engine: [URL] ..... 2- Locate the Notepad program, right-click and Launch as Administrator 3- Go to File > Open, and navigate to C:Program FilesCrashPlanCrashPlanService.ini (note that you will have to change the option from .txt files to all files in the file selection screen in order to see the CrashPlanService.ini) 4- Find the following line in the file: -Xmx512m 5- Edit to something larger such as 768, 896, or 1024. E.g.: -Xmx1024m
This sets the maximum amount of memory that CrashPlan can use. CrashPlan will not use that much until it needs it. I would recommend starting out setting it to 768, and go higher only if you continue experiencing problems. You can set it as high as 2048 on 32-bit systems, or even higher on 64-bit systems. 6- Start the backup engine.
So I tried it but I couldn't save it, I got an error message that said "Access is Denied".
I try to start it from services management but the error 5 (access denied) rises (with user SYSTEM)
I tried create another user with admin privilegies, but it is not working as well, error 1297 rises
I think I added some folder to indexing and COULD this folder is not with SYSTEM privilegies...BUT I cannot see the folder indexed because the service IS NOT WORKING.
When you right click on a photo and go to Properties -> Details , there is a link at the bottom called Remove Properties and Personal Information that will remove the camera EXIF data, GPS location and other metadata.
I took a photo on my iPad and emailed that picture to my Windows 8 laptop. The photo contains personal information including my GPS location that I want to remove. When I try to remove it I get an error message saying File Access Denied....You need permission to perform this action. I'm the only user on this laptop...I'm the Administrator. I have Full Control over this file in permissions. I even added the Take Ownership thing to the right click menu and tried that, but it still wouldn't allow me to remove the personal information from the photo.
It works on photos taken with my other digital cameras, just not with photos taken with my iPad.
In the midst of trying to remove bloatware I have been removing bloatware and its shortcuts from the start menu and respective folders. However, I am running into a snag. There was a wildtangent games folder installed with a bunch of games. I remove everything associated with it, but there are still links in the start menu. I checked the start menu folders and I cannot find the links and whenever I click open file location it brings up the came browser and it shows a bunch of blank links. Pics are attached.
Within the last month or so, shortcuts on the start menu haven't been refreshing when their respective icons actually change. This only pertains to 3rd party programs and games--not those downloaded from the Microsoft store or included in Windows by default. For example, Steam recently changed the design of their logo. This change was never reflected in the start menu.
There are at least several other apps, like the PortableApps launcher, that the same is happening to. I've actually had to go to the entry in appdata and completely remove them and re-add them to get the changes to show. Never had an issue with anything like this until relatively recently, though I can't place one particular event as being definitive. It may have been like this for even longer and I wouldn't have known until a few things updated anyway.
See system spec for details, as everything is up-to-date. It would be nice for software to update icons and have those changes reflected rather than having to add manually.
I have 2 monitors and am wondering if there is some way to make it so that when I bring up the new metro start menu on my 2nd monitor that I can make it stick there?
As it is now, if I open the new menu on my 2nd monitor and then go back to what ever program that I have open on my first monitor (like chrome or I.E. etc) then the start menu will close from my 2nd monitor.
I'd like to make it where it stays open on my 2nd monitor. Is this somehow possible?
In my flash drive I have a picture which I imported into Photos folder.I would like to Customize my Metro Start menu which includes that picture. How do I do that?
I'd like to install windows 8.1 on my laptop. Is there a way to export (file/registry) the start menu so I won't have to create all of the shortcuts and tiles order on my laptop?
I'm using start8 and dual monitor setup in extended mode. Is there a way to keep the metro start menu up on 2nd monitor while have a browser or another program open on the 1st monitor.
I want the volume popup bar with the track title information for Windows Media Player, is this possible, perhaps with a registry edit?
I mainly notice it in gMusic app and I've seen the Pandora app have it as well (Whenever I hit the pause button, it will pop up with album art, artist and track info as well as a volume slider) ...
I mainly use Windows Media Player for music though so I'd like this cool feature for that program, it would be very handy when I'm playing a game and I don't want to alt+tab out just to see what song is playing ...
A window with the title of "App Caster for Android" pops up every time windows starts up. I'm not sure what this application is, does, or even where it came from.
For some reason I cannot do anything in my Program Files for one of my hard drives. My C drive seems to be fine, as well as my 2 other drives. But in my F drive, Ive broken down the program files into a normal one and x86 one. I can basically access every other folder expect the Program Files in F drive. Program Files (x86) in the same drive works perfectly fine. Everytime i try to add a new folder or delete anything in my Program Files folder it says destination folder access denied and i need permission.
Ive tried fiddling with all the UAC and permissions but nothing seems to work.I even tried the command prompt :
"4. To Take Ownership of a Folder or Drive in a Command Prompt. NOTE: This command will take ownership of the folder or drive, and all files and subfolders in the folder or drive."
method but it says Access is Denied in my command prompt.
I am getting access denied when attempting to get into a folder. Just recently installed Windows8. I had the same issue with win7, but I managed to resolve it. What do I need to do to get around this? I don't remember ever having had a problem with simply getting into one of my own folders.
I have two laptops, Lenova with Windows 8 and HP Pavilion with Windows 8 pro. I have a HP Officejet 7560 hooked up to the Lenova.
When I try to access the printer from the HP, it can see the printer, but in trying to connect, Windows is telling me access denied.
If I hookup the printer to the HP, the Lenova can see it, connect to it and print to it just fine.
I have checked all the sharing and permissions settings on my Lenova, and everything should be set to allow another computer to access the printer, but it is still giving me the same message.
The Printer drivers are all up-to-date. I ran DriverScanner 2013
after uninstalling avast few days ago i was prompted to restart the system. Since then when i booted up a random folder named [e1136dde5b111b6e950b(windows defender files)] came up in program files. I cannot delete it since it's needless , nor' rename it , take ownership or anything. I've provided few screenshots showing it.
I originally had a RAID 1 and windows 8 pro 64 bit installed. I had a boot error and could no longer boot into windows. I purchased two new HDDs and created a RAID 1. Loaded Windows 8 Pro with no problem. Then I added the original two HDD so as to retrieve data. I went into the RAID BIOS and took the old HDD off RAID configuration. I then disconnected one of the original RAID HDD and now have only one of the old HDD connected to the motherboard.
In Disk Management, the disk I am trying to access is listed as DISK 1 and divided into System Reserved (D, 350 MB NTFS, Healthy (Active , Primary Partition) and (E 931.17 GB NTFS, Healthy (Primary Partition). But when I try to access the E: drive, I receive the following "E: is not accessible. Access is denied."
Any way to getting access to E: I would like to retrieve data.
I am on 8.1 In my Classic Shell Start Pop-Up I have choices of Control Panel, Devises and Printers, Default Programs, etc. I would like to add "Connect To" but cannot figure out how to do it.
Manage Permission Inheritance in Windows 8 | VISHY Media on technologies and gadgets
Ever get this message or worse, one that does not have the access button attached? you cannot read it, you cannot look at it and you cannot delete it.
There are even worse issues where the permissions are GREYED OUT and you cannot do anything to them. (see below for a solution)
Windows 8 Consumer Preview has a robust permissions scheme that is more geared towards business users rather than err, consumers. An inherited permission means that Windows 8 set the Permissions on a volume, drive, or folder, that same set of permissions will be applied to all folders underneath it.
The solution is to ENABLE INHERITANCE to the volume drive or folder to gain access:
Another solution is to ADD a group called Everyone and give them full control:
Finally, there will be folders where everything is GREYED out in the permissions tab so it seems to be impossible to make changes. EDIT: Check below to see possible solution!
This REALLY sucks and the only solution I have found is a reg hack called "Take Ownership"
Add "Take Ownership" to Explorer Right-Click Menu in Win 7 or Vista - How-To Geek
Install the reg (right click and install) then right click on the folder or drive and select Take Ownership. That will allow you to go back into permissions and select full read/write controls by users.
I recently upgraded my W7 Home premium to a genuine copy of 8 Pro that I got through school and now every time it boots, note pad opens up and has a smaller window saying "Access denied." I don't see anything funny looking in the start up section of task manager and everything in 7 seemed to be good and virus free before the upgrade.
I upgraded my system from windows 7 to windows 8 and now my external WDD 1TB drive is displayed in my computer, but when selecting it I get an 'Access Denied'
Trying to delete a folder I get "Folder Access Denied" -- need to provide administrator permission to delete this folder. I am the only account on this PC an am Administrator. I click continue and get the same message with "Try Again".
OS: Windows 8.1 Pro x86 WMC External Hard Drive: Seagate FreeAgent GoFlex (No external Power Required) Problem: I can't access my External Hard Drive. See The Screenshot Below.
Solution Applied: Drive letter changed. (Not Worked)
Also tried Properties - Security - Advanced - Owner to Everyone. (Not Worked)
Checked the HDD in another PC Windows 8.1 x64. (Not Worked)
I connected the HDD then I installed the "Better-Explorer" through that i can access my external hdd normally but If I Reboot my PC then same Problem with the "Better-Explorer". & If I install The "Better-Explorer" Then if I connect my HDD Then from the beginning i can't access the HDD.
In Tune-Up Utilities Their is Disk Explorer through that I can explore my Ex HDD Drive. I right clicked on my drive from Tune-up & checked the disk for error and then repaired it (Windows Error checking tool) and then reboot my PC but it is still the same.
I am currently using Windows 8 Professional (x64) as an administrator. My issue is that often certain programs or software do not exit properly and show up on Task manager as background processes. The issue is that I cannot end these processes because "Access is Denied" and must therefore restart my computer in order to run these programs. A simple example is Skype. When I quit Skype, it will show up as a background process on Task manager and I cannot end the process. If I try to sign into my Skype account again, it says that I am already logged in from this computer. Battlefield 4 is another example. I've never had this issue with Skype or BF4 previously, nor do I remember installing something significant that may have made changes to my PC.
Im using Windows 8 for very first time & I installed & activated windows 8.1 pro. & created Administrator local account but still windows 8.1 gives me access denied for most of the task (even for editing text file i have to run notepad as admin by right click option & open the file from notepad) how can i get rid of that annoying "access denied" popup in main Login ID. Some time internet connection get 651 error.
OS - Windows 8.1 Pro x64
note - I turned off UAC by pulling slider all the way down at the very first boot.
Following a recent Windows Update, Windows Firewall on my Windows 8 system was disabled. Upon attempting to start the firewall through the services.msc dialog, I receive an error code 1068, informing that the dependency service or group failed to start. After doing some googling to attempt to resolve the issue I found the dependency service, the Base Filtering Engine (BFE) was not active. When attempting to start the BFE service, I am stopped with an error 5, indicating that access is denied.
I am unable to figure out why access to the BFE service should be denied, since this account is the only account on the computer and has administrator privileges. Because of these issues with the firewall, I am unable to access the internet and am creating this thread through a separate laptop computer.
In a potentially related issue, Windows is not "activated", though I had activated it approximately a year earlier. Because of this, I am unable to access my Microsoft Office programs. I believe that I am unable to activate windows due to a lack of internet connectivity caused by the above firewall issue.
My next step is to take the computer into a nearby service depot and pay the requisite charges.
My new laptop that runs the despicable OS, Windows 8. I'm the ONLY user, the owner AND Administrator of my laptop, but I'm denied access to my own files!! I'm only a casual user, meaning I use my PC for "fun stuff"...i.e. writing & reading emails; playing games & searching the internet for things that interest me. I don't have anything on my PC that has to be "guarded" from others, as NO ONE ELSE uses my PC. That said, I should be able to access EVERYTHING on my PC, but the paranoid screwballs at Micro$oft have set up the most confounding OS, & I'm repeatedly denied accessing things like: Program Files, Pictures (even though I'm the one who put them there!!), Properties, etc. etc.
I know I'm not the only one who's been confronted with these problems, as I've read the same things repeated on sites in the many places I've visited in my attempt to figure out how to break the chains that Micro$oft has put on MY PC. How to change the settings so I can access my own stuff? I don't understand why MY computer is given the authority to DENY ME access to stuff I entered myself. When I couldn't view my OWN Pictures, (that I put here!!!), How I can use my own PC the way I want to...like the "good old days" of XP & even Vista HP?
I have 3 disks in my computer, of which 2 are SSDs.
I swapped the SATA ports between one SSD and the HDD so as to give the SSD a SATA port with maximum 6gb/s transfer speed, and now the access to the HDD is denied. The drive letters are correct, as they should be.
The user (myself, admin) did not change.
What can be done about it? I already tried to check the ownership of the drive and says STEVECOMPUTER/Administrators, which looks good, as my user account is an admin. Still, I have no access.
